Hello under ten
hope that you are well.
thank you for the above tutorial.
and adding the missing link to the part of packsge:
another vesion of the CCcam total package file containing CCcam 2.1.3.
kindly can you add the missing link to the tutorial
best regards
zazolita
link is missing
reference :Automated Install Script for Ubuntu CCcam Server
-Automated Install Script for Ubuntu CCcam Server . Date . 03-03-2011 11:29 AM
Here is another vesion of the CCcam total package file containing CCcam 2.1.3 for those wishing to use oscam with CCcam.
Hello under ten
hope that you are well.
thank you for the above tutorial.
the link is missing to the part of packsge:
another vesion of the CCcam total package file containing CCcam 2.1.3.
kindly can you add the missing link to the tutorial
thanking you for all your kind efforts
best regards
zazolita
Hello everyone 29 April
RE: Al jazeera viaccess 4 sport card - infinity pheonix serial reader- card detect failure
Many thanks for your response regards the card detect fail error. Unfortunayely, after carrying out the modifications underten and newtolinux kindly suggested earlier (i.e on 04 ,14 and 18 of April) still receive the same error
i.e card detect fail.
. I very much appreciate any help to make the card is detected and the cccamserver is running.
Best Regards
zazolita
P.S
I have a Viaccess 4 - Al Jazeera Sport card, a Phoenix serial Infinity card reader (nort USB reader- this reader is powered by the USB cable but uses the Serial cable when set to Phoenix mode) and a Technomate TM-500 super receiver (patched with the latest ur-image published on 28-feb-11 running CCcam v2.1.4). The jsc sport card (Yellow card) is activated and valid to January 2012) . The jsc sport channels are clear in my technomate.
I am running Ubuntu 10.04 LTS and CCcam 2.1.4 as done by this tutorial:
Automated Install Script for Ubuntu CCcam Server
Although I am running Ubntu 10.04 but I tried to install my Phoenix Infinity serial card reader as done in this tutorial for debian- cccam server:
Tutorial: How to install Infinity USB programmer on a Debian with CCcam
---------------------------------------------------------------------------------------------
Previous modications suggested by underten and newtolinux that I mad but still receiving error message of card detect fail:
1- Suggested modifications by underten 4 April 11.
The card reader is connected with a serial cable and usb cable. The card reader is set to phoenix mode with 6MHz in Windows XP and the lights are red and blue steady when no card is inserted (when the card is inserted the blue light flashes), and then I installed the drivers with Nftytool-1.1 in Ubuntu. The reader light is red and blue (blue is steady when no card is inserted). Blue light flashes when card is inserted.
This is my cccam.cfg:
SERVER LISTEN PORT : 12000
SERIAL READER : /dev/ttyS0 phoenix
SMARTCARD CLOCK FREQUENCY: /dev/ttyS0 6000000
CAMKEY: /dev/ttyS0 00 00 00 00 00 00 00 00
CAMDATA: /dev/ttyS0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Underten suggestion: Try adding the following line to replace serial reader
PHOENIX READER PATH : /dev/ttyS0
Also try different port e.g
PHOENIX READER PATH : /dev/ttyS1
Reboot the server with the reader & card inserted.
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
PROVIDERINFO FILE : /var/etc/CCcam.providers
STATIC CW FILE : /var/keys/constant.cw
CAID PRIO FILE : /var/etc/CCcam.prio
SOFTKEY FILE : /var/keys/SoftCam.Key
AUTOROLL FILE : /var/keys/AutoRoll.Key
The problem I now have is that my card cannot be detected.
This is what I checked so far:
in ubuntu :
root@xxxx:/usr/local/nftytool-1.1# ./nftytool -p phoenix -- -s
Infinity USB 1.00
Status: disabled
Polarity: smartmouse
Frequency: none
in entitlementstats :
card reader /dev/ttyS0
no or unknown card inserted
When I do the CCcam.x86 debug my viaccess card doesn't show and I get a card detect fail error message.
I also tried to start the infinity reader in nftytool by typing:
./nftytool -p phoenix -- -p phoenix -f 6.00 -e
I also tried to test all other MHz frequencies
It gives me read and write errors.
What can I do to fix tall those errors and get my server to detect my card?
Thanks so much for your help.
Best Regards, zazolita
Underten suggestion: try the above and report back how you get on.
--------------------------------------------------------------------------------------
2- Suggested modifications by newtoliux 14 April
seems is not recognising your usb device.
try downloading nftytool again & extracting to debian then do the following
apt-get install libusb-dev
apt-get install gcc
./configure
make
once you've completed the above succesfully then issue this from command
./nftytool -p phoenix -- -f 6.00 -p phoenix -e
try and report back
regards
t
----------------------------------------------------------------------------------------------------
3- Suggested modifications made by newtoliux date 14 April
seems is not recognising your usb device.
try downloading nftytool again & extracting to debian then do the following
apt-get install libusb-dev
apt-get install gcc
./configure
make
once you've completed the above succesfully then issue this from command
./nftytool -p phoenix -- -f 6.00 -p phoenix -e
try and report back
regards
t
Hello newtolinux
RE: Al jazeera viaccess 4 sport card - infinity pheonix reader- card detect failure
Hope that you are well.
Many thanks for your response regards the card detect fail error. I am very sory for the late reply to your suggestions to solve the problem as above. Unfortunayely, after carrying out the modifications you and under ten kindly suggested earlier (i.e on 14 and 18 of April also underten on 10 April) still receive the same error
i.e card detect fail.
. I very much appreciate any help to make the card is detected and the server is running.
Best Regards
zazolita
P.S
I have a Viaccess 4 - Al Jazeera Sport card, a Phoenix Infinity card reader and a Technomate TM-500 super receiver (patched with the latest ur-image published on 28-feb-11 running CCcam v2.1.4). The jsc sport card (Yellow card) is activated and valid to January 2012) . The jsc sport channels are clear in my technomate.
I am running Ubuntu 10.04TLS and CCcam 2.1.4 as done by this tutorial:
Automated Install Script for Ubuntu CCcam Server
I tried to install my Phoenix Infinity card reader as done in this tutorial:
Tutorial: How to install Infinity USB programmer on a Debian with CCcam
Display Moreseems is not recognising your usb device.
try downloading nftytool again & extracting to debian then do the following
apt-get install libusb-dev
apt-get install gcc
./configure
make
once you've completed the above succesfully then issue this from command
./nftytool -p phoenix -- -f 6.00 -p phoenix -e
try and report back
regards
t
Hello T.
I hope you are well. Thanks so much for your reply.
I did what you wrote, but I still get the same error message.
This is the message that comes up:
zazolita@zazolita-desktop:/var/nftytool$ ./nftytool -p phoenix -- -f 6.00 -p phoenix -e
Error in usb_interrupt_write()
Error in usb_interrupt_read()
Error in usb_interrupt_write()
Error in usb_interrupt_read()
�
Error in usb_interrupt_write()
Error in usb_interrupt_read()
Error in usb_interrupt_write()
zazolita@zazolita-desktop:/var/nftytool$ sudo ./nftytool -p phoenix -- -f 6.00 -p phoenix -e
Infinity USB 1.05
zazolita@zazolita-desktop:/var/nftytool$
In entitlements I can still see this:
card reader /dev/ttyS0
no or unknown card inserted
card reader /dev/ttyS1
no or unknown card inserted
What else could I do?
The card is an Al Jazeera Sport Viaccess 4 and it is valid until Jan 2012 and the channels are clear on the Technomate 500 super receiver.
Before inserting the card the lights are solid red and solid blue. After inserting the card the lights are as follows: one is solid red and the other one is flashing red-blue.
The card reader uses a serial cable and an usb power cable.
Thanks again for your help and look forward to hearing from you.
Regards, zazolita
Hello Ten Below
RE: card detect fail
Hope that you are well
Many thanks for your fast response to my private message regards the above. Yes the jsc sport card (Yellow card) is activated and valid to January 2012) . The jsc sport channels are clear in my technomate.
Unfortunayely I still receive the same error
i.e card detect fail after carrying out the modifications you kindly suggested as follows. I very much
appreciate your kind help to make the card is detectedn and the server is running.
I changed my cfg as instructed by you. This is my new cfg.
F: test test
SERVER LISTEN PORT : 12000
SOFTKEY FILE : /var/keys/SoftCam.Key
AUTOROLL FILE : /var/keys/AutoRoll.Key
STATIC CW FILE : /var/keys/constant.cw
CAID PRIO FILE : /var/etc/CCcam.prio
PROVIDERINFO FILE : /var/etc/CCcam.providers
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
SERIAL READER: /dev/ttyS0
SERIAL READER: /dev/ttyS1
PHOENIX READER PATH: /dev/ttyS0
SMARTCARD CLOCK FREQUENCY: /dev/ttyS0 6000000
CAMKEY: /dev/ttyS0 00 00 00 00 00 00 00 00
CAMDATA: /dev/ttyS0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
PHOENIX READER PATH: /dev/ttyS1
SMARTCARD CLOCK FREQUENCY: /dev/ttyS1 6000000
CAMKEY: /dev/ttyS1 00 00 00 00 00 00 00 00
CAMDATA: /dev/ttyS1 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Then I did a debug and the card detect fail message is still there.
zazolita@zazolita-desktop:/usr/local/bin$ ./CCcam.x86 -d
21:38:31.612 CCcam: ======================================================================
21:38:31.612 CCcam: starting CCcam 2.1.4 compiled on Jan 30 2010@17:00:48
21:38:31.612 CCcam: ======================================================================
21:38:31.612 CCcam: online using nodeId fbefb91fd4a803e2
21:38:31.613 CCcam: create 1 cam device(s)
21:38:31.764 CCcam: card detect fail
21:38:31.776 CCcam: added 785 keys from /var/keys/SoftCam.Key
21:38:31.777 CCcam: added 435 keys from /var/keys/AutoRoll.Key
21:38:31.777 CCcam: added 54 keys from /var/keys/constant.cw
21:38:31.778 CCcam: parsed 0 entries from /var/etc/CCcam.prio
21:38:31.781 CCcam: added 1274 provider names from /var/etc/CCcam.providers
21:38:31.781 CCcam: added 4 channel names from /var/etc/CCcam.channelinfo
21:38:31.781 CCcam: server started on port 12000
21:38:31.915 CCcam: card detect fail
This is what entitlements show:
card reader /dev/ttyS0
no or unknown card inserted
card reader /dev/ttyS1
no or unknown card inserted
These errors come up when I try to start the reader in nftytool:
zazolita@zazolita-desktop:~$ cd /var/nftytool
zazolita@zazolita-desktop:/var/nftytool$ ./nftytool -p phoenix -- -p phoenix -f 6.00 -e
Error in usb_interrupt_write()
Error in usb_interrupt_read()
Error in usb_interrupt_write()
Error in usb_interrupt_read()
Error in usb_interrupt_write()
Error in usb_interrupt_read()
Error in usb_interrupt_write()
zazolita@zazolita-desktop:/var/nftytool$
You wrote For internal sharing my C-line should be as follows:
C: servers local ip 12000 test test
Also please can you advice me how can I find out my server ip? Is it this one: http://127.0.0.1:16001
or is it the one that shows whenI go on whatismyip.com?
in ubuntu why does it show the reder as smart mouse even though I set the reader is a serial infinity in phoenix mode :
root@xxxx:/usr/local/nftytool-1.1# ./nftytool -p phoenix -- -s
Infinity USB 1.00
Status: disabled
Polarity: smartmouse
Frequency: none
I look forward on hearing from you.
Thank you so much for your kind efforts and cooperation.
best Regards,
Zazolita
Hello everyone,
I need help please in getting my cccam server to detect my card.
I have a Viaccess 4 - Al Jazeera Sport card, a Phoenix Infinity card reader and a Technomate TM-500 super receiver (patched with the latest ur-image published on 28-feb-11 running CCcam v2.1.4).
I am running Ubuntu 10.04TLS and CCcam 2.1.4 as done by this tutorial:
http://linuxsat-shares.com/lin…-ubuntu-cccam-server.html
I then copied the following files from my receiver to my server:
CCcam.prio, CCcam.channelinfo, Cccam.providers, Autoroll.key, Softcam.key, constant.cw...do I need to copy more files from the receiver to the server?
These files overwrote the ones that were already in there from the install_package I downloaded from the link above. Is that OK that I took the files from the receiver and added those or should I have left the files that came with the install script mentioned in the link above? I can copy those back if needed.
In the cccam.cfg of my technomate I only entered a C-line: C: mydomain.dyndns.org 12000 test test. Do I need to add anything else?
My dns settings I added to the router and port 12000 is open.
Then I tried to install my Phoenix Infinity card reader as done in this tutorial:
http://linuxsat-shares.com/lin…grammer-debian-cccam.html
The card reader is connected with a serial cable and usb cable. The card reader is set to phoenix mode with 6MHz in Windows XP and the lights are red and blue steady when no card is inserted (when the card is inserted the blue light flashes), and then I installed the drivers with Nftytool-1.1 in Ubuntu. The reader light is red and blue (blue is steady when no card is inserted). Blue light flashes when card is inserted.
This is my cccam.cfg:
SERVER LISTEN PORT : 12000
SERIAL READER : /dev/ttyS0 phoenix
SMARTCARD CLOCK FREQUENCY: /dev/ttyS0 6000000
CAMKEY: /dev/ttyS0 00 00 00 00 00 00 00 00
CAMDATA: /dev/ttyS0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
PROVIDERINFO FILE : /var/etc/CCcam.providers
STATIC CW FILE : /var/keys/constant.cw
CAID PRIO FILE : /var/etc/CCcam.prio
SOFTKEY FILE : /var/keys/SoftCam.Key
AUTOROLL FILE : /var/keys/AutoRoll.Key
F: test test 0 0 0 { 0:0:1 }
Is there anything missing in my cfg?
The problem I now have is that my card cannot be detected.
This is what I checked so far:
in ubuntu :
root@xxxx:/usr/local/nftytool-1.1# ./nftytool -p phoenix -- -s
Infinity USB 1.00
Status: disabled
Polarity: smartmouse
Frequency: none
in entitlementstats :
card reader /dev/ttyS0
no or unknown card inserted
When I do the CCcam.x86 debug my viaccess card doesn't show and I get a card detect fail error message.
I also tried to start the infinity reader in nftytool by typing:
./nftytool -p phoenix -- -p phoenix -f 6.00 -e
It gives me read and write errors.
I also tried to test all other MHz frequencies by amending the cfg and then starting the reader in nftytool, but I also get the read and write error codes.
What can I do to fix tall those errors and get my server to detect my card?
Thanks so much for your help. I look forward to hearing from you.
Regards, zazolita
