hello

if anyone knows how to change (reset to 0000 ) parental code of a mag 322

not by clearing user data (because you have to reconstruc as new box..)

but perhaps someone can find what could be done with putty..

regards

hello

can someone confirm running new upgrade v2.20.00. and with this firmware still able to use also any "MagicRemote or Aura hd software on IOS or Android"

thanks for your report

Macabros

i was with my 322 on the 2.19.01-transitional and the rc2 was refused not compatible but with the last image from Nepose 2.20.00 no problem to load

from usb no problem to access my provider

only some incompatibility (waiting new images to correct) with "soft magicremote " and no more access by putty

you can eventualy reload 2.19.01transitional

regards

NEW info : perhaps same problem as MagicRemote not Working...

I try to test by putty access to control some variale as Nepose as explaine in other post...

i open putty on my windows computer ( i was before using it with success on transitional firmware)

i got access on the mag322 ip (vérified)

at the question loggin as: root > password *

it was not possible keying the 930920 password from the pc keyboard : it look as if the variable on the mag side was not correctly defined

everyone can give some test?

regards

hello Nepose

i have been successfully testing your last (07/july) firmware i have had to modify some config -i access with no problem my provider and switching looks really faster

screen of the inner portal is in better definition than before and menu seem to be near receiveing new enhancements and programs..

I had to re define in my computer the ID for MagicCast because the ID has changed with this firmware and is not the same as before !

I also got an annoying problem because i use " MAGICREMOTE" on ios

it was working great before but with the update it is not usable (its very ennoying because as i resent the signal by a DVB modulator through my antenne cable i was using MAGICREMOTE from different rooms !

the message i find on my iphone when trying to accessis :

your set-top box and mobile device should be connected to the same network (ok it is )

!settings > turn on remote control option on your set top box (settings > system settings > Remotecontrol)

configure "multicast routing to detect your set up box!

can you look Nepose why it does not work?

i am not sure if i had to validate IGMP 1/2 or 3 and what url to put as "multicast url"

i have been testing a lot about the password and i am not sure that it is operating correctly beetween mag firmware and the MAGICREMOTE on ios

when i put a password i expect : success or Bad password

if you can help i will appreciate

Best regards to you (all)

Hello Nepose thanks for the job ! not all tested but on my 322 "all things are going great gun" with the loading of the "last" v 2.20.00

will test more

regards

Nickjallday i am in the same config you are on :2.19.01-transitional is the only firmware i can use other transitional buggy for me and final rc2 does not accept wrong signature..

i hope Nepose will sort a rc3 that we can directly load from 2.19.01-transitional

regards

hello Macabros

i try the same way and get the same result after writting the firmware address in http menu - i also tried by usb method in the sama way ii used before with success for rc1 transitional and got wrong signature ..

so i stay on rc1 waiting for new compilation..because i was never blocked and new developments can wait!

regards

eb0b1b8334fa21.png

its what i find when trying access

regards

hello Nepose

it looks like if you want access you need to give some credential ident/password to access ftp or > you can access but from our side looks as private ...

not public or anonymous

sorry nepose trying to go

Unauthorized

This server could not verify that you are authorized to access the document requested. Either you supplied the wrong credentials (e.g., bad password), or your browser doesn't understand how to supply the credentials required.

its allways what i find

hello i need more info please ..

in my mag 322 device info you can find 2.19.01-release

when i go to https://firmware.magboxes.xyz i only find (for 322 series)

• imageupdate_2.19.01-transitional-

and no " release " version is this normal ?

best regard

hello neeljaviya to be more accurate -- i used stalker middle ware but i took care to obtain for the channels i needed to extract the same m3u files because it is very easy to create your own directories and even sub directories in the inner portal.

the best way to have a large m3u file on your computer and extract and transfer the ones you need to inner directories..

it was my choice and i benefits of the 2 worlds..

If you put the good reference in the NPT server you are just and only tied to your local time reference

for pvr you access by f1 to the menu ( in inner portal ) and you can in your local time program beginning and end of the channel you want record..immediatly or some hours later... But keep in mind that your box need to be made in sleeping mode before the recording began...

the box cannot receive 2 channels > you look at... or you record.. not both

look if you can use xstream editor with your provider

i hope it can help

best regards

hello to all

i can guess i own a genuine 322 box (i sent the sn number to infomir for control) i made the first update by internet imageupdate-infomir220-07r2-324

then i make Nepose upgrade by usb transitional + realease and now all is going ok i can also have ssh access (not with origina infomir)

i can read in the software update http menu : http://vps.magboxes.xyz//Mag322/latest/imageupdate

i wait Nepose info before trying as the last firmware is not still there

but i confirm until now all is working well even programmed recording

waiting for the next step

best regards

and good work Nepose !

Hello guys,
i d'ont know about this new box, but i can assure you i use the spiderbox HD9000 from more than a year, i used nuevoxstream closed now and service+ seem to be in new reconstructing.. but not so good than before;;
The spiderbox9000 has very good picture ( i use it with a pansonic plasma ) and i assure you that it's roc solid on cccam as long as you have a good serveur ( hop 0 & 1 no more)
When disconnecting or freze i always look inCCCAM menu and it's always because server diconnect himself adjusting new cards!
i replace the wifi vonets by 200mz cpl plugs made static ip and since no problem at all
what is a plus for me : the 2 usb for external disc and usb software, the good channel editor you can find, the blind scan until two mz steps.. and last but not least the internal rf modulator i used with a 15 meters antenna cable to my tiny portable tv to modify and tune my antenna on the roof tuning each lnb myself looking the Signal and quality bars ( Astra/ HB / 28.2 °) ( i live south ouest france )
this system does not need to invest in software knowledge , can share a card in your local network on other spider the only drawback (not for me..) not reshare the cccam lines.
i love it i know that if the support is leaved by the resellers it will give anyway service for what i have paid ( or more )
just to let know that i am happy for my choice
best regards to all