Posts by ref
-
-
my friends did any of the members install spark version 1.2.83 on the amiko alien 2 and does the spark have the option to Cross over it from the system> bisic setting> factory defauit> boot to E2? also can it with enigma 2 from DuckBA-e2 plugin when select spark spark bot on spark? My amiko alien 2 is on spark 1.2.61 and there is no option to Cross over it from the system> bisic setting> factory default> boot to E2. so i can't boot from spark to enigma2 that way but i do it with the hardware on / off buttons and ok. On enigma two with DuckBA-e2 I can select spark system after that plugin configuring image ... spark detected :) writing bootargs ... Cannot access MTD device / dev / mtd7: No such file or directory Error: environment not initialized error writing bootarges >>>> ERROR !!! Press OK to close. After that I select enigma2 and the DuckBA-e2 plugin does it completely. Boot E2 / N in NAND. Configuring image ... Active partition: ''. Restarting current soft from NAND. >>>> Press OK button to rebot box. Is it expedient to update to spark 1.2.83 if these two options of easy switching from spark to enigma 2 and vice versa don't work on that version of spark either? If the update to spark1.2.83 fails, can I restore at least this spark 1.2.61? Can I back up the current spark? I am asking for your advice for these doubts of mine and I thank you in advance.
-
Spark on my amiko alien 2 triplex is 1.2.61, what is latest spark image for it and link please.
-
Thank you for the great image. At the beginning I found serviceapp in the menu and launched exteplayer3 in it that with the support of ffmpeg iptv works better but I don't remember if I installed ffmpeg from the feed or it was already in the image. IPTV works great but I can't find the serviceapp in the menu now. What happened because I can't find him? Pure2 image on internal flash amiko alien 2 is not very slow with installed cacheflush plugins and cleanmemo set to delete trash every five minutes. The channel lists of astra 19.2 E and hotbird 13 E are already represented, but I also need the appropriate channel lists from other satellites for pure2 6.5 image, so where can I find them and how and where to insert them into the image? I need your suggestions and thank you for possible help my friends.
-
Yes I am but not working on my amiko alien2 unfortunately.
If you want a modern copy and are working wonderful , download the copy on this topic and follow its
Thanks to our wonderful friend / BarviX
We wish you your active and continuous participation in the forum with all of your experiences and knowledge in this field, so do not skimp on your brothers with it
Please thank our dear friend / BarviX for compiling this image & try it
openvision-enigma2-develop-10.2-r268-spark
We await another copy for our friends who have a 7162 processor
I installed the version on my device that has the processor 7162 on the external flash
using the plugin Nfr4X Multiboot of opennfr-5.3
The copy is wonderful. Everything works with it. All thanks and appreciation to our wonderful friend Barvix
To pass through the version after installation, you must be patient. The process takes 3 to 5 minutes
-
So we wait but weird in version r254 satellite channels not working while iptc channels working weel.
-
there is only bootlogo_wait.mvi but I cane not upload it because it is folder so I cane not take it. I do not know. No other file bootlogo there in usr/share
-
bootlogo mvi from openvision 10.2 r254.
is that file need?
-
In a way I'm very happy that a program that I made around 2010/2011 still can be useful for happy users, but it is somewhat confusing as well:)
It must a a testament how good these SH4 boxes were made, since they are still around.I think this was an old Read.me:
WLTool v0.2
- minor fixes and blind/hack adjustment for fw 1.2.08
- on fw 1.1.42 press GREEN to start plugin OSD menu
- on fw 1.2.07 press RED to start plugin OSD menu
- on fw 1.2.08+ press RED (twice on Alien) and LEFT or RIGHT (on other Spark STBs or Alien)
- it seems that API has changed in fw 1.2.08, but as there is no documentation or anything about it...,
RC response is slow - temporary solution: press UP/DOWN slowly:)
- looking for new API...
WLTool v0.1 (short for; Well, let's try to write a spark plugin)
- Mcas updater (self explanatory)
- Basic sysinfo (public/private IP, traffic, etc, mem and cpu info, some yaffs2 data)
- E2 cleaner (may be helpful to some with ecc errors)
- Ugly TCP clients/servers info (really ugly as there are no monospace fonts at the moment)
- Based on Proton-team api v103prel4.
- Tested, well, briefly checked, on Alien 8900 fw v1142 n v1207, should work just fine on other siblings.
While in active windows, use UP, DOWN, LEFT or RIGHT to return back to WLTbox menu. EXIT returns to the main plugin menu. There is no need to leave WLTbox running (green icon) as currently it does nothing in background. There are vogue plans to include more useful functions and better GUI as there are miniGUI and GTK libs already installed.I installed your plugin WLTbox on my receiver amiko alien 2 and it works great. Before that plugin whenever I installed any enigma 2 image I had problems with buttons on front panel which did not function but after installing WLTbox they work. Thank you.
-
I can install version before 263 but I do not know where is location bootlogo in openvision 10.2 to take it from enigma 2. Do you know?
-
I has been written for the team and awaits a response from one of the team membersTry this version to see if the problem exists or is solved
https://drive.google.com/open?…NLm2xDfWb-uyKxR7XfWI06-sl
Solution provided by geisivi Tester
change current bootlogo (video) by bootlogo from old versions (before 263) and now restart enigma don’t go to black screen.
Ok, but where is bootlogo in openvision?
I know how to fix exit button and stendbay but I don't know how to replace the bootlogo. Please help me. This image is great, thanks to the team. The earlier versions worked well for me on the internal flash of amiko alien 2, but on the new versions is a black screen unfortunately.
I am sorry but I do not know to delete empty space in thiis post. -
-
-
Unfortunatelli for me not working on amiko alien2.
-
-
Thanks for your repčy bro Ahmed.
Is there more information about plugin_upgrade.boot.s and how to use guide.
Is that pčugin for when the receiver wont boot?
-
-
My friends, can you explain whay is plugin_upgrade.boot.s the most important plugin?
I installled some of these plugins before, do I uninstall them firs and then install these plugins that you gave or I don not have to uninstall them?
-
Is guide for this image available, I can not find it?
-
No channel, black screan.
my friends
If there is any error in the copy, it must be written to the team on its site until the correction is done
السلام عليكم اخي الفاضل,, من فضلك هل انت تستطيع ان ترسل الرسالة الى الفريق لانني لست ماهرا لذلك.
мy friend Ahmed, can you written to the team please.