Posts by Baikonur

Hi all, weird problem - running VTI x2 physical card x2 in server, server oscam, client cccam, all channels fine except for 3 client side only (ie clearing fine on server). I thought it was oscam.services but that looks fine on both. Any other hints (where to start, what it could be) or should I post full configs and offending sids etc?
Thanks in advance!

Sorry to necro this thread. But I have an Ultimo and a Solo2 side by side now, on exactly the same channel (& HDMI). The Ultimo is head and shoulders better than the Solo2 in terms of picture quality. Maybe I was lucky with the Ultimo (or unlucky with the Solo2) but that's my 2c worth.

Hi all,

Set up 2 Ultimos on network (no reshares) and the picture on client freezes for about 7-8 seconds every 10 mins or so on both WAN and LAN, not channel sensitive (though FTAs are OK). There are 2 different cards being read.

The configs are all fine (oscam + cccam) - I've spent days on this and have tried about a dozen different configs floating around the interwebs.

Do I need to access the webif of the client box at the precise moment the glitch happens, or is there another log I should be looking at (if so, what's the name so I can find the path)? If this wouldn't be in a log, then I need to start buying new lan adapters and modems at both ends and see if that works...

EDIT- sorry just found that since my last config change it freezes once every hour or so at most (not minutes as it used to), so may still be a setup issue or just par for the course? But if you could tell me what to look for in a log anyway that would be great (for future reference if nothing else).

OK SOLVED!! The port forwarding on the modem was set to UDP protocol - I changed it to 'both TCP and UDP' and hey presto, all the channels lit up like Christmas on Broadway. Now I just need a proper ddns host and I should be all set. Pity there isn't a 'noob' or 'too lazy to google' sub forum somewhere here - it would be nice to give back to the community a little for a change.

IP per all those match that given by the router. So my failed oscam.server has "device = x4.x2.x3.x1,11000". Do you mean any specific log? Or one of the tabs on the oscam webif? The log per the oscam.conf (hdd/oscam.log) is a bit messy and appears to be the same as on the webif

2013/08/31 13:34:56 51C280 c [DVBAPI] Demuxer #0 impossible to descramble PID #2 CAID 0500 PROVID 032A00 ECMPID 05DE (NO MATCHING READER)
2013/08/31 13:34:56 51C280 c [DVBAPI] Demuxer #0 impossible to descramble PID #3 CAID 1813 PROVID 000068 ECMPID 0523 (NO MATCHING READER)
2013/08/31 13:34:56 51C280 c [DVBAPI] Demuxer #0 impossible to descramble PID #5 CAID 1861 PROVID 000000 ECMPID 0642 (NO MATCHING READER)
2013/08/31 13:34:56 51C280 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!

OK so I've gone back to original configs where box 1 with the cards is feeding box 2 over local network using the config in my last post. It works perfectly.

Webif shows au = on ; crypted = on ; the correct IP and port of box 1 ; protocol = cccam ext (2.1.3-3165) ; and status = connected 3 of 3 cards

So now I replace local IP 192.168.1.116 with my external IP from my modem status page 99.99.99.99 in box 2's oscam.server

Webif now shows au = on ; crypted = off ;the correct IP and port of box 1 per modem ; protocol cccam(-) ; no login or online data ; and status = error
and below that: 2013/08/31 13:10:55 51C280 c [DVBAPI] Demuxer #0 impossible to descramble PID #4 CAID 1803 PROVID 000000 ECMPID 057A (NO MATCHING READER)

I'm just going to smash my head against the laptop two or three times, so please excuse any signs of trauma in my next posts.

Thanks very much again - yeah, I know using current IP of server is just a stop-gap, and I signed up for dnsdynamic.org a while back, and nothing seems to work except over local network. Locally my oscam.server looks like this and works fine

label = random
protocol = cccam
device = 192.168.1.116,11000
user = ***
password = ***
inactivitytimeout = 30
reconnecttimeout = 2
caid = 0B01,1803
group = 1,2
cccversion = 2.2.1
cccmaxhops = 2
cccwantemu = 1
ccckeepalive = 1
cccreconnect = 0

I've tried to replace "192.168.1.116" with both the external IP of the router handling the server box (,11000), and also the dnsdynamic host domain (,11000) yet the picture just freezes on both occasions. I've removed the c: line I put in per your previous post and updated to oscam 1.20-unstable-8778. Is there any way to get info from the webif as to what the problem is?

Cheers Steve. Any idea where dyndns is hosted? Once you give them your credit card they know who you are, where you live and exactly what you're sharing with who. I can't say I'd do my happy dance at that thought.

But if I have to go down this route, then c'est la vie. But ... just to test it out beforehand (to see if mobile internet latency and operator throttling etc makes this watchable at the client box location) can I put server box's router (dynamic) IP into the cline? Or log into the other ddns service and just put that in the cline?

Thank you Master G beer10

Using cccam protocol. Any obvious reason why I can't put the external IP of the server box's router instead of [your.hostname.org] ?

That said, I signed up for some ddns service a few weeks ago (was a tiny bit optimistic in my time estimates) not supported by my router .... but theoretically have a domain name that will point to server box router once I manually log in from the PC. Do I put that name in place of [your.hostname.org] and simply keep the PC that's residing at the same IP as the server box turned on and it's internet connection alive? (as a temporary measure while I sort out a better modem).

And finally (sorry total noob) I presume the C: line goes into oscam.user as a separate line? At the moment I have client box oscam.server line - device=[local server box ip] , port and just user and password in oscam.user (and this is working fine over LAN).

Well, just tried the external IP comma port ... and nothing. Should this work in theory?

Thanks - not sure I fully get it though. I've got it working on lan by using a port already (if this sounds weird, that's what happens when you follow instructions without really understanding them:)). So in client oscam.server it currently has local.ip.ip.ip,port.

So before I get no-ip, you're saying I should just change local.ip.ip.ip,port to router.external.ip.ip,same port and it should work? No need to widen the httpallowed range?

Hi folks,
After hours of trial and error I've got two Ultimos to share the same card on a home network using oscam on both. So far it's been like trying to build the Death Star based only on forum posts : lmao: though once it's all working it seems like a 5 year old could do it! Now going for phase 2 - taking one box outside the lan. And I think I need a bit of help...

A) I have a dynamic IP - are there any ddns providers that are seen as safer or more reliable than the others? Otherwise I'll go with no-ip which seems to get mentioned a lot.
B) Before I get the ddns running, just to test it on dynamic, what alterations do I need to make to the configs for the client box to leaves the home network? I'm guessing it's just oscam.conf needs a new (wider) httpallowed line, and oscam.server needs a new device (presumably my temporary dynamic IP, with the port remaining the same?). I'm asking because I just tried both those changes and either there's a bit more to it, or I screwed it up.

Quote from anniman

oooh your other home. are you a politician?

I thought personal insults were against forum rules. I mean I can't possibly be a politician since neither house was paid for by the taxpayer or by serious fraud :laugh:.

Omnikey CI?!!? Where do I pay? Ebay link pretty please?

But I do have a second Ultimo in my other home. I guess I could put the third card in there if I can't find a way to tuck a USB reader away neatly here, though the electricity and internet bills would probably make this an expensive way to keep out clutter...

Hi - I have 2 card readers and 2 empty CI slots (aka an Ultimo). But I have 3 cards (nagra, conax and NDS).

Can you recommend me a hardware cam that would read any one of these (preferably all), so I can put one of the cards in, use it in the CI slot and run via oscam? I'd rather not use a usb cardreader as I'm already struggling to minimize the cables wires and peripherals in my living room!

Thanks very much - that helps a lot. I missed it because the Ultimo's remote is so sensitive it doesn't register keys unless you're pointing exactly at the box. I assumed that button was unassigned because it never responded.

When I select preview though, it puts the picture over the text. So the channel feed is on the right and the preview is on the left. Is that a VTI issue or is this something you learn to live with?

Hi guys (anyone who's not on a beach),

What do you use to manage your recorded playback?

What I have on my VTI (Ultimo) seems too awful for any human to use. If you want to watch something you've recorded, you go to menu, media player then you navigate some directories, then you press play and it goes into a playlist... and you can't read the title because the text is clipped after a few characters.

I may be hoping for the impossible, but I'd really like thumbnails, a larger font and quicker access. Or was Enigma 2 never intended to be a pvr?

Thanks in advance

Hi folks,

Since I'm trying not to ask a dozen questions that have no doubt been answered elsewhere, I thought I'd see if any of you had seen any good write-ups doing the rounds on the interweb, showing how we get from lnb, card, cam, and STB to pixels on a screen. I'm hoping for something that works off the principle that complexity = simplicity multiplied, and has a few diagrams here and there. Something that would explain RSAs EMMs CASes decryption etc etc and (ideally) assumes that you are reasonably versed in general IT stuff (ie no explanations of FTP, servers, open source OSes etc etc). If there's anything that explains how OScam does its magic that would be brilliant too.

Any pointers gratefully received!