Posts by MrMxyzptlk

This is an old topic but if anybody should encounter this problem: this is a SmarDV CAM problem, I don't know about the new versions but the old version does not know the 0B1D caid. I couldn't find any FW update, and finally I got a Neotion Conax CAM and with that works like a charm. So this is not a STB problem but a CAM problem

So back to this problem: I have a Conax Modul with a 0B1D card and the STB isn't reading correctly. First of all, when I try to access the modul informations it says "wait for ci ..." and get stuck there. In the log I can see only the usual set page messages.
Although I have a 0b02 card too and it works with the module. But I need to work with the 0b1d card in the module, and when I insert in the STB it says:
18:29:30.479 dvb_ci/dvbci.cpp:1820 reset CI Slot 0: reset requested
18:29:33.621 dvb_ci/dvbci.cpp:1058 setInputSource eDVBCIInterfaces->setInputSource(0, 4)
18:29:33.622 dvb_ci/dvbci.cpp:2165 setSource CI Slot 0 setSource(0)
Conax18:29:41.433 dvb_ci/dvbci_camgr.cpp:78 setCAIDs eDVBCICAManagerSession::setCAIDs casCount = 10
18:29:41.433 dvb_ci/dvbci.cpp:635 recheckPMTHandlers The CI in Slot 0 has said it can handle caid 0b02... so use it
18:29:41.433 dvb_ci/dvbci.cpp:713 recheckPMTHandlers (1)CISlot 0, usecount now 1
18:29:41.434 dvb_ci/dvbci.cpp:1058 setInputSource eDVBCIInterfaces->setInputSource(0, 4)
18:29:41.434 dvb_ci/dvbci.cpp:2165 setSource CI Slot 0 setSource(0)
18:29:41.434 dvb_ci/dvbci.cpp:879 gotPMT [eDVBCIInterfaces] gotPMT

But it isn't the 0b02 card in the module but the 0b1d card. If I insert the module in another STB it sees correctly with the caid 0b1d.

If I access the INIT option from the CI menu it says:
18:31:00.643 Components/ActionMap.py:46 action action -> OkCancelActions OK
18:31:00.644 Components/ActionMap.py:53 action unknown action OkCancelActions/OK! typo in keymap?

As for the 0b1d caid, this isn't present in the CI Assigment menu so I cannot assign it manually either, also I tried to force it by the ci0.xml file, but did not help. Any ideas?
Thank you, any help would be welcomed.

Hi. So I have the following situation:
I have an official Conax subscription card for my operator (FocusSat) and also I have a SmarDV CAM module for another Conax card (MTVA). To read my FocusSat card I use Oscam for my MTVA card I would like to use my Conax module on the CI slot. But there is no image from my CI module with my MTVA card. I tried various images (BlackHole, Open ATV and Vix) not one works with the combination. I used the CI Assigment to indicate the services that my Common Interface should open, I tried as well with channels as well with provider but nothing. If I uninstall OSCAM and the Softcam panel than my CI modul works like a charm with both of the cards, but I cannot get for them to work with one opened with Oscam and the othe with the CI module. Does anybody had this problem? Is there a solution? Maybe it works with a CCCam + CI module? Or is there some othere undocumented setting that I should use and I don't know about?

Hi. As I had said before I managed to resolve exactly as you said: I have rewritten my firmware and restarted all my Oscam settings from 0. So the card is working OK now thanks for all your help.

I have only two questions left:
Should the Canal+ channels work at all? I have a 4 day trial for Canal+ but I didn't activated yet (waiting for next weekend, so I can see some Formula 1 :) ). Is it possible to activate anyhow?
And above I saw some newcamd config for my card, if I'm not sharing my card to newcamd lines should I add that line anyhow? Is that mandatory?

why is the newcamd part important?

Thanks guys for the help. nosoup4u I followed your indication but I also have resetted every single settings of mine, I reinstalled the FW, rewrote every single oscam file and somewhere on the road I did something right as now it's working from my external card reader (I swapped with my HD+ card which was the external until now, but I tried to swap them already a few days ago and it did not help than). Anyhow, thank you.

I know, I'm planning a VU+ Solo2 in October or November. I think the Duo2 is just a little bit too much but the Solo2 looks nice ...

Thank you, sadly it did not help. Is it possible that all this problems come from a incompatibility with my stb (I'm using Amiko Alien 8900) or from a wrong card (although I don't believe that a wronmg card could act like this ... )?

Thanks but it won't help me. I have a SH4 STB and I need a 8874 or newer oscam for a TNT Via 5 card to work. And I don't see how added EMU support for softcam would help an official card. Could all my problems come from the used Enigma2 or the STB?

When the freeze error comes it also says rejected group no matching reader for CAID 0500&030B00 ... and it happens an all channels this. It stays frozen for a minute or so than it comes back. Ultra annoying

Hello all. I have several problems with a TNT Sat card in Oscam 8853, I hope you might help me.

First of all:
Does anybody have the correct current files for oscam.srvid and oscam.services for the TNT Sat?

Another problem: after a while, my STB stops reading from the card, and I just don't see why. It just stops, hangs for a while with "impossible to descramble" message, than it comes back. I also have a HD+ card and it works OK. I dont have the sleep = 1 parameter set.

Also I understand i need to set deprecated = 1 for the card to work correctly, but since I have set deprecated = 1, I need to restart OScam several time so that I get the Entitlements of the card. If I don't set deprecated = 1, it gives me 3 line of errors after it resets itself and all is OK.
The errors are as follows:
2013/08/26 18:46:32 4D8968 r tntsat [internal] card system not supported
2013/08/26 18:46:32 4D8968 r tntsat [internal] Normal mode failed, reverting to Deprecated Mode
2013/08/26 18:46:33 4D8968 r tntsat [internal] Warning: D=0 is invalid, forcing D=1

My configs are:

Oscam.conf:
[dvbapi]
enabled = 1
au = 1
pmt_mode = 1
user = dvbapi
boxtype = ipbox

Oscam.server
[reader]
label = tntsat
protocol = internal
device = /dev/sci0
services = tntsat
caid = 0500
detect = cd
ident = 0500:030B00,FFF400
aeskeys = 0500@030B00:0,0,0,0,0,0,0,0,0,0,0,0,9A***56
group = 3
emmcache = 1,3,2
lb_weight = 300
deprecated = 1

Oscam.user:

[account]
user = dvbapi
pwd = mydvbapipasswd
uniq = 1
au = hdplus
group = 1,2,3,4
numusers = 0
penalty = 0

My Oscam.srvid is incomplete, but at least it should work with the right services (the HD channels are completed correctly for example, still when I switch to them they work for several minutes than freeze, the they work once again for several minutes, etc you get the idea).

And a bonus question: my card came with a 4 day offer to the Canal+ channels, is it possible to activate this offer with Oscam and if so does it need some special settings (like in srvid and services files or on the autoupdate part).