After the last update, my system crash (also if i try to install previous version 2.0.200410...)
I have a ZGemma H9.2H with PureE2 version 6.5.
After the last update, my system crash (also if i try to install previous version 2.0.200410...)
I have a ZGemma H9.2H with PureE2 version 6.5.
I found a bug in the motor settings... I explain... If I select a channel and this is not locked, I try to enter in the motor settings and try to center the frequency in manual mode (step by step). When I exit from the motor settings (whether or not is centered the frequency sought) purE2 asks me if I intend to return to previously tuned channel. If I answer "yes", the motor movement screen appears and the system enters in a loop. To stop the motor, it is necessary trying to change channels repeatedly and, in some cases, the box must be switched off and on again (ZGemma H9.2H). This problema don't happens with others images (OpenAtv, Vix, i.e.). If you can take a look, please ...
I tested sateditor 2.7 on T2Mi channels and there are configuration problems on the single channels ... That is, for example, if I set a T2MI frequency on sateditor 54.9E table (Yamal), it seems that on the parameters T2MI configuration (PLP id, etc.) something is not working properly, and the channels are locked but are not displayed ...
Only a T2MI transponder Zeobud on 4,8E works correctly and the 5 T2Mi channels on this transponder are correctly displayed...
I've a H2.9H Zgemma with PurE2 6.5.
Past2Present, can you check with Dimitrij, pls??
Air Digital said T2-MI should be OK, although I can't say yet, since I haven't tried it consciously.
They are checking now re. C band... L8r... ;)
Excellent ... In the meantime, I tested sateditor 2.7 on T2Mi channels and there are configuration problems on the individual channels ... That is, for example, if I set a T2MI frequency on 54.9E table sateditor of Yamal, it seems that on the parameters T2MI configuration (PLP id, etc.) something is not working properly, and the channels are locked but are not displayed ... Can you check with the team, pls??
Thnks... I'll test tonight...
Display MoreTarget would be the true dish enthusiasts, who are the owners of motorized systems... like me :redface::redface::redface:... but not only... (also users of greater Russia, for example ...)
And the support to T2-Mi standard would be, without a shadow of a doubt, a strong distinctive sign between PurE2 and the other "big" images Enigma 2 ... But I understand that in a Linux world it is very difficult to maintain this distinctive signal ... The market commands ... Air Digital ?? :cool1::smirk:...
OK, just saw this on OPenPLi forum:
"ver. 2.7 - add support for T2MI
Need test."
And:
"Hello.
Dimitrij :) You are GREAT MASTER !!!It works beautifully. Everything is correct / adding, editing the transponder, scanning and receiving.
Thank you very much . It was needed, this plugin."
Searched on OpenPli forum but no results " No results found for 'you are great master !!!it works beautifully. everything correct adding, editing the transponder, scanning and receiving.'.".
However, if the news is true, we are facing a very important turning point for Enigma2 images ... And the purE2 team must - in my opinion - readily adapt the image to support for the new T2MI standard ....
Sorry, gorski, but is this a new plugin developed by the OpenPli team or has the image core been changed ??
Tune failed, maybe "t2mi_pid 4096"?
Not enough space for Timeshift, no HDD with enough free space etc.??
:wink:
I was writing about albakos post... ;)
ah.. ok..!!!
Absolutely.
Mine is just an idea, a constructive idea and nothing else ...
We are a small team and have to carefully choose our battle, m8... Not sure there's a huge interest in EU for it, though... We'll see...
Target would be the true dish enthusiasts, who are the owners of motorized systems... like me :redface::redface::redface:... but not only... (also users of greater Russia, for example ...)
And the support to T2-Mi standard would be, without a shadow of a doubt, a strong distinctive sign between PurE2 and the other "big" images Enigma 2 ... But I understand that in a Linux world it is very difficult to maintain this distinctive signal ... The market commands ... Air Digital ?? :cool1::smirk:...
Just saw this:
"The T2MI transponder support plugin is missing. There are more and more such transponders on satellites - 90E, 72.1E, 55E, 53E, 40E, 14W, 40.5W.":crying::crying::crying:
Of course, if Just or other team members wanted to try to rework the miss plugin, I would be happy to be a betatester ...:eye-tongue:
Just saw this:
"The T2MI transponder support plugin is missing. There are more and more such transponders on satellites - 90E, 72.1E, 55E, 53E, 40E, 14W, 40.5W."
:crying::crying::crying:
Display More...and big enough... and my system is static and dishes I use are not big...
But I think I can understand these issues...
It seems as if you may have to wait for a new HW or at least new development which will implement this standard through new drivers...
https://dveo.com/broadcast-systems/DVB-T2-Analyzer.html
Yes, i knew that advanced tuners are needed to see the T2-MI standard, but I also know that it is possible to implement this functionality in Enigma2 ... Furthermore, it would seem that the tuner of our Zgemma H9.2H is already able to support this standard ( https://www.amazon.it/Ricevito…r-integrato/dp/B07LFZTWCG)
It would be better to deepen the topic, maybe with other members of your magnificent team ... What do you think ???
What precisely are you trying to watch? I tested Abertis in H7 and it works just fine - see Ciefp's lists of channels...
That box of yours is limited, indeed... Try selling it and put a little bit more together to buy a stronger Zgemma, like H7 or H9 Combo.
Ok gorski. I have already a H2.9H, very strong machine... I'll explain... 54.9E, Yamal... If you try to scan: 1) 12674V, SR 15284, FEC 3/4; 2) 152694V, SR 15284, FEC 3/4; 3) 12714V, SR 10269, FEC 3/4, you'll see that lock a good signal but... no channel, only channel reference... This, because on those frequencies there are channels transmitted (not encripted, attention..!!) with new T2-MI standard. It deals with a DVB standard that's slowly spreading, especially on russian satellites... That's all...:wink:
Of course, if your system is not motorized, you'll never be able to understand well what I mean...
Hi gorski, and thank so much for the hard work of the team.
I'd ask if it were possible to integrate in the last, great version of PurE2, decoding of standard T2-Mi (or a specific plugin, if it's better...), particularly for the zGemma h2x that provide an excellent tuner S2x that already supports, so good, multistream decode... I read there are already works in this sense (astra-sm, for example), in the enigma2 world... Many channels on 4.8e or 46e, and others, transmit with this standard... and SatDreamGr team has already experimented with a solution (very partial and difficult to implement, specifically...), but it don't solve the problem without availability of an expensive box... It would really be a bomb if PurE2 manage to have this character...:eye-tongue::cool1::100:
yes,text in satellite selection at third line and picon update method at second line,the last eleven characters are missing at the end.
Yes. Same problem with my box (VuPlus 2 duo), enigma 2.0, openatv 6.3 last update.
Thank for your reply, s3n0.
Downloaded last version. Now the problem Is changed: when i try to download a group of satellite picon, the process stops, but enigma don't stuck, and appears the message error that i added here ... Any idea??
I attach a screen with my explained problem... The process is blocked for at least 15 min in this case...
There's a problem with the download of the zip files. I tried to download a number of satellites picon (i.e.: DTTItaly, 13°E, 19,2°E, 16°E, 1,9°E, 23,3°E, etc.) according with my motorized dish, but the process stopped at a moment, the system block and It not goes on (specifically it block after the unzip of the 6th or 7th satellite) and i have to reboot the box (vuplus duo 2 with openatv 6.3, last upgrade). If I try with 5 or 6 satellites, no problem, all good, but if i try with 7 or plus satellites, it crash... I tried with many combinations of satellites... Always the same problem... It seems a lack of memory, but i've verified and this is not the problem... Any idea???
In my Box, Vu plus due duo, Open ATV 3.0, the .ipk file don't install the plugin...
I don't see it in plugin list but if i try to re-install , console says "i can't install because match the installed version goldenplugin (4.4)"... But where is it?? Where???