Yes, I will ship it back to the retailer for checkup. Will post here whatever he thinks is the case.
Well. He said he fixed with something called BBS Tool. Flashed it four times, and he says its working as normal.
It had something to do with different enigma versions, he said. Strange. I am not wiser.
Yes, I will ship it back to the retailer for checkup. Will post here whatever he thinks is the case.
Try reprogramming the remote.
[h=1]How to : Reprogram Vu+ Remote Control[/h]
Tried that as well, no luck. But thanks!
Display MoreHave you considered it may be the remote at fault here?
Have you replaced the batteries?
To check if the remote is transmitting get your camera phone and point the remote at it and press a button. You will see if its operating by looking at the phone screen as the infrared signal will appear as white light.
Nano
Yes, and yes, it sends a signal :(
Tried backupimage 204. No luck. Then tried latest original image. Same procedure her. It gets to the startup menus where you select the TV format (hdmi 720, 1024i etc)
Remote control only responds a few times on the up and down arrows, but not the OK button. After some tries, it seems to freeze for some time, before it wakes up again.
Those are the same symptoms as the other images, so I think this is a hardware problem.
Ok, super. And thanks.
It is a VU+ Solo 2, just 5 months old, and bought from a norwegian retailer, completely original. No fakes in this house.
I tried several times after the post to fix it, but it seems to be really messed up. The remote control is not working, the only way to control the box is via webinterface. After a while it starts to toggle the shutdown menu for no reason. Startup times are long, at least 90 seconds, if it starts at all. Normally I have to cut the main power from the wall outlet to get it to go beyond the starting... and VU+ Solo2 messages.
I am really lost here. Tried contacting the retailer, he says he has never heard of such, and needs to take it in for testing. He also claims he has not had a single complaint about this model.
Thanks for any help. Much appreciated.
I did make an introduction post. Did I miss something?
Hello
My box started acting out yesterday, so I had to re-flash it.
I had problems installing the correct TSpanel, so i forgot to take out the usb-stick from the front panel.
There was flash files for BH 205 on it, so it has flashed itself numerous times without me knowing.
Wasn't it supposed to wait for a keypress?
After installing, the remote control no longer works. I have to use the webinterface to control it.
When done installing, it start to flash the shutdown meny by itself.
Also the led on the left side on the box is flashing unevenly, can't remember seeing that before?
Sometimes it wont start at all, just hangs on the Starting...
Other times it will go to setup menu after flashing again.
Is the box toast, or what? Why is it flashing without asking for confirmation?
