hi guys just received my gigablue quad today and tryed to get oscam to work. seems to show connected in oscam info but dosent seem to show picture or sound but cccam works no problem
anyone else know what the problem can be??
thanks
hi guys just received my gigablue quad today and tryed to get oscam to work. seems to show connected in oscam info but dosent seem to show picture or sound but cccam works no problem
anyone else know what the problem can be??
thanks
500 gig hdd what is thr format staus for this fat 32 I want to be able to record for long periods
hi bud, what your better doing is booting into spark with your hdd connected, go into settings then hdd settings, partition manager then delete all partitions and make a new one ( type ex3 ) with gives you an unlimited record time
how do you load this using rear usb and not through spark e2uploader
like this mate
1. make sure you have a usb stick with is clean ( formatted )
2. download your favorite image
3. when you have your image make a new folder on your usb stick called enigma2 and place the 2 files you download and put them in the enigma2 folder witch is on your stick
4. now turn the receiver off at the back and insert the usb stick into the rear of the receiver.
5. press and hold the ok button on the front of the receiver and turn it on at the back with your finger still holding down ok.
6. when you see FORC displayed on the receiver , release your finger from the ok button then press down, then right, then ok
7. if everything is ok you should see the receiver display flashing u ld
First of all ascottishbloke thank you for the image it is superb. What I want to know is how do I enable the picons?
I have them all stored in /usr/local/share/enigma2/picon
try load them onto a usb stick m8
http://linuxsat-support.com/bu…fore-posting-section.html
the photos should include your user name and date .... but you knew that right ??? ;)
yea i knew that buddy, just at work atm but will upload one tonight
will upload pics if needed tonight
Selling fifa 14 for xbox 360, only used a few times. looking for £30 delivered
Payment via bank transfer
I have the same problem but with championc image and an alien 2.
fresh install and fist thing i did was update the box but keeps getting stuck in boot cycle!
Has anyone else had this!
Cheers
not me mate nor a few of my mates. usually if it gets stuck in a bootloop as we say, just turn the box off at the back and turn back on
Excuse my ignorance but if I use spark will that backup my e2 image or spark image or both
Sent from my HTC Sensation Z710e using Tapatalk 2
yea northern is correct, go into spark > plugins > and press ok on a plugin that looks like e2_upgrade then you will see backup e2 at bottom input your usb, press the color button for e2 backup and press ok. dosent take long eighter ;)
yea, what to do if your using my image is, go into menu > Plugins > then press the green button > now scroll to emus > then imstall what oscam you want. i use oscam_8918
hi
this can be used also on gm spark triplex?????
thanks
read the rules before posting, this is for plugings only, no discussion what so ever
you shouldent have to set it to that bud, if you try mine im running 1080i 50MHz and itss perfect, all buttons setup, even the portal button opens media portal
take it out mate and install my one
http://linuxsat-support.com/am…on-v2-1-mod-mui4tler.html
once its installed goto Menu > PKT Bluepanel > Actualizations > Download to pull down the latest image which includes the HD Judder Fix
Display MoreHello
STB crashes on any softcam change. The issue was present with previous image version too.
Log attached
Cheers
install alternative softcam manager then go in emu manager, setect no emu then select your emu in alternative softcam manager
image now judder free, go to Menu > PKT Bluepanel > Actualizations > Download to pull down the latest image which includes the HD Judder Fix
well PKT was always my first and best image but went to a backup made by paulb and so far its been the best ;)
Display MoreHi.
Problem on Alien2.
I found that timer recordings are cut at 2 hours although setting was 3 or more hours' duration.
Maybe format should be ext3/4 to get unlimited recordings? On the other hand, this is not required on other STBs with different images and external drives formatted FAT32...
Comments/suggestions are welcome.
Thanks/Ciao
you can only record 4gb if your drive is set to fat32. i have the same prob but i dont record much
- Full tuner support (both DVB-S2 and DVB-T / C T2 / C FUNZ)
- EOS panel
- WebIf ver 1.7.1
- Video Wizard to V.Format
- Wi-Fi support (tested drivers: rt3070, RT5370, rtl8187, 8712u
- RC-selection: Three, default
- Receiver Display switchable (on transmitter display or the display off)
- Overclocking to 750 MHz
- Red LED for adjustable Deepstandby
- Faster backup
- Boot volume adjustable
- Samba
- PEARL USB display support (pre-configured)
- All screenshots are supported on WebIF
- Webif bouquet editor in NF-design
- Webif WebAdmin in the LF design
- Auto Timer
- Spark backup from E2 out: so that you can make a backup of its soft under E2 Spark!
- PIP goes with all three tuners (a perfect PIP erziehlen to the DVB-T tuner to adjust your region even if it is not used)
- Second Webif
- New Skin
- Picon Manager
- Tuner selection (to select the standard tuners)
- Channel Selection Picon preview
What's new:
- New server plugin for -2.0
Preset overclocking to 600Mhz -
- About screen with IP and Wifi
- New sleep timer
- Automatically detects new Emumanager the Emu lies in / var / emu and fits in Manager
- Additional keys revised F1 +
- Some small fixes (TuxTxt umlauts)
- Piconvorschau
- Automatic Wlanstickerkennung at boot
Keys:
V-format = Video Wizard
Prev + Next = zaphistory
Find = tuning
Set recording path = tms
Blue = PPanel
Portal = Browser Plugin
F1 + Blue = station name on the display
F1 + Yellow = station name is displayed in
F1 + Red = Reboot
F1 +0-9 = Emu in Alphabetical Order of the / var / emu (adjustable or directory)
F1 + F2 = Stop All emus
F1 + F3 = current emus restart
Looking for an old dm500c or dm800c if anyone has onem will look at offers for other cable receivers. let me know what you got