If your using the latest Vix image buddy you should not need to mount the hdd, it should auto-mount it for you.
Posts by mckee25
-
-
Just double checks your settings using this tutorial, it's for ViX but setting up crosspeg on BH is basically the same.
-
A Introduction post is required before requesting help buddy, make a post here: Introductions
Restart your box then have a look in the plugins menu.
-
Try it now bud.
-
-
Yep, you will need to use your dyndns addy buddy when you connect from outside your home network, make sure you open the port on your router that matches which one you pick in openwebif.
-
Glad your sorted buddy, I will close this thread now.
beer10
-
Just a thought, do you have the autoshutdown plugin installed?? if so disable it.
-
-
The inverto black ultra is worth every penny buddy, replacing it is very easy, the lnb holder on a triax slots into the end of the dish arm, there is a small tab on each side of the holder which you can push in and then pull the lnb holder out from the end of the arm.
You would normally then set the second input from the dish in your tuner config as "second cable from motorised dish"
-
Hello buddy, I have used a 1.1m triax dish on a tm 2600 with no probs at all, I did change to a Supreme Intelligent dark motor and had nothing but trouble with it, it certainly did not like a heavy dish attached to it, went straight back to the tm 2600 and it has never gave one bit of bother. I don't think a 1.2m dish will give the tm motor any problems, try it first before you decide to change, no point in buying something you don't need, you already have one of the best dish motor's about...
-
I have never run two sly cards together, but if I was going too this is the configs I would try, these are not tested buddy...
[global]
nice = -1
logfile = /dev/null
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
cachedelay = 120
bindwait = 120
resolvedelay = 30
serialreadertimeout = 1500
maxlogsize = 10
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
keepalive = 1[webif]
httpport = 8888
httpuser =
httppwd =
httprefresh = 30
httphideidleclients = 0
httpallowed = 0.0.0.0 - 255.255.255.255
debug = 255[newcamd]
key = 0102030405060708091011121314
port = 10000@0963:000000;10001@0963:000000[reader]
label = ***UK
protocol = internal
device = /dev/sci0
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
blockemm-unknown = 1
emmcache = 1,3,2
group = 1
caid = 0963
ident = 0963:000000
ecmwhitelist =[reader]
label = ***UK
protocol = internal
device = /dev/sci1
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
blockemm-unknown = 1
emmcache = 1,3,2
group = 2
caid = 0963
ident = 0963:000000
ecmwhitelist =[account]
user = linuxsat
pwd = support
monlevel = 0
uniq = 0
group = 1
au = ***UK
caid = 0963
ident = 0963:000000[account]
user = linuxsat1
pwd = support1
monlevel = 0
uniq = 0
group = 2
au = ***UK
caid = 0963
ident = 0963:000000 -
Yep have to agree, defo one of the best receivers I ever had. It can do all the things you have asked buddy.
-
Hello buddy,
Your first post should be here: Introductions
Did you read the rules when you signed up??? click here to read them: Rules
pay particular attention to rules 12 & 13
-
-
-
One program you can use buddy is Dreamset, available here:
-
-
Have a read of this tutorial buddy: http://linuxsat-support.com/tu…-setup-without-usals.html
-
is your current dns up to date?? as a free member you now have to log in at least once every 30 days to keep the service active. I went vip with dyndns over a year ago now and it was the best thing I did for less than $20 a year.... I would think that amount is not beyond the hobbyist.
