hello,
the problem is, that i´m not able to install a new image into the flash. it always says "fail".
have you also the possibility to change the bootsequence?
if so, which one do you use for booting from the usb stick?
thank you once more for the imformations...
regards
portas525
hello again and sorry for my delay,..
nano: i have done what you said and found "duoboot" on my box..
when i press the up key the box says usba, usbb, hdd1...3, nano, pfln, and nfs...
so thank you for this information.
when i will install a new image, i first have to set the bootorder to usb (when my image is on the usb stick?)
is it right, that after i choose the bootorder the box ask me what bootloader i will use?
i would like to install the nebulla image, for that i have to choose the b4t bootloader, is this right?
thank you
regrads
portas525
hello one´s more:
so i have fixed my first problem. no i´m an owner of a nbox 5800s with enigma2 on it.
now i want to install multiboot, but the box only say "fail".
i have tryed about 5 usb sticks, always the same message..
is there a special usb-stick needed for the nbox?
thank you
regard
portas
thank you for your answer.
i´ve tryed to translate the manual into the german, but with goolge translater....
i know the jtag cable, but it seems to be very complex to debug this box.
you know someone in germany how can convert the box?
thank you and regard
portas525
hello,
thank you for your post.
i have a its 5800 and no wire on the back site of the mainboard.
please can you circa describe where i can found those pins?
on the other site of the mainboard i have a connector called "debug". to you mean, i also can use this?
thank you
regards
portas525
also had done the same thing on the good old DBOX!
hello,
thank you for your post.
i have a its 5800 and no wire on the back site of the mainboard.
please can you circa describe where i can found those pins?
on the other site of the mainboard i have a connector called "debug". to you mean, i also can use this?
thank you
regards
portas525
