Thanks everyone....
I used the following image to reflash the box and everything works fine. The image allows me to enable the sat tuner and disable cable and terrestrial tuners. I selected the 28.2 bird on the sat tuner, did a scan, everything works perfectly.
sim2-persianempire-lite-beta3-Sunray_sr4_ready-SSL-84b-by_sat4fun
Special thanks to Iame for detailing how you flash the box.
Madasafish
I have just received my DM800se (single tuner) from China. When I boot it, it loads an image that says "Sunray 4 Powered by CNIGMA (Sim2)". The image has english language which is fine but only has the Asian satellites to search against and I cannot get it to load europe satellites. The networking is setup and hard disk installed - all working fine.
1. Anyone know how I can get it to load/install european satellites (namely Astra 22.8E - Sly)
2. There is alot of talk on here about SSL84B and sim2.10. How do you find out exactly what version of SSL and sim you have?
3. Would it be better to flash a new european image to it. If so, which one? On ealier deambox's I did prefer the Pli images
Thanks in advance,
Madasafish
It chatter is xbmc will port it to a new high spec (cheap) media player box from china called the mele A1000 and A2000.
Would anyone know how to get Freesat EPG on a DM500s. I have searched around and the closest I can find is PLi Jade on Enigma 2 which will not work on DM500s.
Many thanks,
Madasafish
I have found a manual to do a JTAG on an OpenBox S9 on another forum...It's in Spanish but it may help someone. Please note, I have not tried it myself so cannot endorse it. I am unable to upload it here due to pdf file size of 469KB being larger than the allowable upload file size on here.
Madasafish
I have a couple questions. I hope you can advise.
1.If I have been given a cline and I add it to lets say for example a DM500s or DM800. Can I set up multiroom with other DM500s to use that single cline?
2. If you were setting up a cccam server and wanted to get maximum (cline) usage from your local card. What kit would you use. eg: is a fast PC running debian/ubunto and a specific card reader (recommendations welcome) faster than a DM800. Assume there is a very fast internet connection. Can you cache the EMM's for faster response times?
I look forward to replies.
Madasafish
The test cline I received originally was from a payserver. A kind member of this forum provided another test cline and that 2nd cline was as if I had a local. Fast channel changes and not a single freeze.
With the help of this forum I now know what to expect from a good cline.
Thank-you linuxsat-shares and more importantly the forum member.
Madasafish
At long last, I have managed to get a free test cline. It works :eyebrows: It is only for 24 hours but it keeps on freezing to the point the "scrambled" pop-up box appears and then disappears with the picture resuming. Clearly this is not acceptible but it is only a test cline.
Is there a way on an openbox to check the reliability/speed of a cline?
Madasafish
Mmmmmmm....From reading that, it would seem that CS days are numbered.
Do you have to have local card for this to work?
Thanks in advance
Madasafish
Damm...
Received my openbox S9 today, plugged it in, did a full scan on 28.2 and free channels are working fine. I can see the CCCcam and the Newcamd cams and was hoping to set it up as a server. From reading on this forum, setting it up as a server, would invite clines. I still do not understand why. Not sure if my CS terminology is right but I am looking for a cline to check (first time) functionality.
Anougher option! C15DIGB10 15" HD Ready LCD TV buy online | Currys
Not 1080 but 720 on a screen that small i dont think i will make much difference to be honest! And all for ?89!
That is a good deal....Thank-you
Thanks guys,
Monitor was the wrong word to use, it should say "Flat screen TV".
22" flat screen TV is too big...A 12" netbook would of been ideal as I could use it for other things. Never mind, I am sure there are smaller flat screen TV's around that I can use.
Thanks again,
Madasafish
I have taken the plunge and ordered an Openbox S9. My situation requires a small 10" to 15" LCD monitor connected to the box. The obvious choice is to use a small LCD TV with HDMI. I was wondering if anyone knows if a Netbook (any recommendations greatly received) could act as a TV monitor in this instance either using the HDMI or composite video connections.
Many thanks in advance.
Madasafish
You have a pm mate, a line for you to have to play round with today.
:caked: Just checked...PM not there yet.
Display More
C: abcd.dyndns.tv 12000 abc 12345 no { 0:0:3 }
ALLOW TELNETINFO: yes
ALLOW WEBINFO: yes
WEBINFO USERNAME : dreambox
WEBINFO PASSWORD : 123456
TELNETINFO USERNAME : root
TELNETINFO PASSWORD : pass
TELNETINFO LISTEN PORT : 16
WEBINFO LISTEN PORT : 16
ZAP OSD TIME :0
OSD USERNAME :root
OSD PASSWORD :
OSD PORT :80
SHOW TIMING : yes
DEBUG : yes
NEWCAMD CONF : no
DISABLE EMM : no
EXTRA EMM LEVEL : no
MINI OSD : yes
CAMKEY: /dev/sci0 00 00 00 00 00 00 00 00
CAMDATA: /dev/sci0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SOFTKEY FILE : /var/keys/SoftCam.Key
AUTOROLL FILE : /var/keys/AutoRoll.Key
STATIC CW FILE : /var/keys/constant.cw
CAID PRIO FILE : /var/etc/CCcam.prio
PROVIDERINFO FILE : /var/etc/CCcam.providers
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
#LOG WARNINGS : /tmp/warnings.txt
#NEWCAMD STEALTH : 0
#MINIMUM DOWNHOPS: 2
Hi Jim, only a quick thought, What software package did you use to edit the config? If it was a DOS based package like "Notepad" then as an example, line 1 would look like this when using the Dreambox unix editor Vi.
C: abcd.dyndns.tv 12000 abc 12345 no { 0:0:3 }^M
It could be this 'Control M' (^M) at the end of the line that is causing the problem. The ^M does not show when viewing as HTML.
Madasafish
