Posts by sergio

yeh seen them there Prophet but I don't think they have stock, I mailed them.
But tbh if there is delivery charge it might not be worth it I can get a box for £45

Guy's
My brother managed to fry his 500s motherboard yesterday and I cant find one anywhere.
Can anyone point me at one by any chance, used to be on the bay for around £20

Thanks

sergio

It doesn't read to good my last post, I mean thanks for the help.
Also the like and thanks buttons are not working.

Sergio

thanks to you guys.
thanks and like buttons not working.
Managed to install via Tspanel in the end and up and running in no time.

Cheers
sergio

yes dvbsnoop is installed usr>bin chmod 755. (I take it there is only one version of dvbsnoop)
To be fair I am using a older version ( I don't have any problem with the sat version)
I have tried to install this latest version via telnet from tmp but keep returning no such file. maybe I am inputting the wrong command.
What is the telnet command exactly.
Cheers abu baniaz

I have tried before to install this cable version of autobouquts with the same error results I am getting now.
I have been trying to get this to work on OpenATV 5.1 and my trusty PLI 4.0 but always get the same errors as the image attached.
any one shed any light on the issues I have.

many thanks

Got it sorted with plenty of patients and a lot of dreamup.
feckin thing.

sergio

Just a update, not tried dreamup yet, as I say I don't want to crucify the box just yet. But I have tried optiflasher, and got that to communicate okay, but after the command to wait untill reboot I got a error message OptiFlasher Error: HTTP/1.0 404 Not Found.
Anyone know how to get passed this.

cheers.......sergio

I have tried to install dflash from all the sources and all the versions without success. I just get a error message, they all seem to be looking for ssl82/83/84, and I have ssl76c installed. So the next step would be, to try and update the drivers, but I am a little worried about that as I don't know which drivers to update to via Tspanel.
Anyone put in the right direction.

cheers sergio

Thanks for the reply masterG. I have been looking at Tspanel for the drivers, but as with a lot of stuff on there is I cant get all the info in the OSD so I am not sure which is the correct driver, the other link you gave me for the up to date drivers isn't working.
I have to go out now, so I will give it a go later.

Thanks sergio

Dont know if anyone can shed any light on this, I have 2 dm800 pro's, and I have had issues with one of them from day one. I feel there is a problem with the flash memory, as there has been very little space left in memory whatever image I flashed ie 1.5 to 3.5mb, so I decided to flash with a older image so I flashed with ssl76c first then (sim201e-76-gp5.00-OE1.6-dm800-20100429).
Now the box will not enter flash mode at all. The box is still working as normal and I can communicate with no issues, but all I get now on the display is 20100429, baically the image file name.
Anyway I have ordered a 800se from china, and I am waiting for it to arrive, once I have set it up and working I am then going to attempt to KILL or cure the above.
So the questions are.
Has anyone had this issue and resolved? OR
Is it just a question of using all the versions of Dreamup I have?
I have used flashwizzard pro on a 500 I was having probs flashing with Dreamup, and it worked a treat. But I dont think you can use it on the dm800.
Is that correct???

Then see what I have left.

Cheers for any help sergio

Yes if your happy with that, but if you can get it to flash via flashwizzard pro, it takes about 45seconds.
Just quicker thats all, if you can obtain a ip addy.

Connect up the box, see if you can get a ip address. Have a look at your router settings, and look at attached devices, if you find it there you can try and flash a good pli image via flashwizzard pro don't use a backup image(not recommended this way).
If that doesn't work out give it a go with dreamup.

Good luck

If there is nothing on the disc that matters, you could try and initialise/format to ex3.

Quote from nush

i did a standard pli update from this image, then removed the webif that came with it, after that installed from pli manager "webif old" plugin, all works fine now.
hope this helps
nush

Thanks nush, that worked a treat....

sergio

Quote from Benkurd

OpenPLi-2.1-beta-dm800-20111121 by gjstroom

New image with SIM2 SSL84a. PLi made a new HD default skin (PLI-HD). They switched back to 0902 drivers, this is great because SSL84(a) works fine with these.
I made the new OpenWebif the default webinterface, it's not quite finished but it sure has potential !

This image is a 100% build image from OpenPLi source, it uses original 0902 drivers which will run all functions and plugins without further patching.
You can also use the update function, as long as the PLi team doesn't switch to a newer SSL and drivers again.
Only working on sim2 boxes !

Features:
source: 2011-11-21
drivers: 2011-09-02 original
bootloader: ssl84a
size:40.7 mb

Bootlogo:
standard bootlogo

Plugins:
cccam 2.2.1
OpenWebif

Image flashing:
Be sure you have SSL84 on your box, if you get the "INVALID IMAGE (OR OLD VERSION)" error, flash SSL84 first and try again.
Internet Explorer (recommended)
dreamup

Skins:
PLi-HD

Download:

multiupload

md5 hash: 761159c2a9e8a26f715181208a8cf31d

Download stats

Display More

Hi
I am a fan of pli images by gjstroom, I have 2 dm800 pro's both had the ssl82 versions, but I needed to reflash the box upstairs. I decided to use this latest version with ssl84a, but I also stream this box to the laptop so I can watch sport downstairs, whilst the mrs watches s*it*. But is it possible to get this image working with webinterface, because webif isnt compatible with clones. I have removed the built in webif plugin and tried pli and tspanel webinterface plugins, without success. Can anyone help?

Many thanks