Yes, when HD went it was a few at a time on Tuesdays and Thursdays
Posts by kill_bill
-
-
As carlmalin says, Sky Italia is still dark so no doubt this is going the same way. Glad I bought a motorised dish now!
-
No, assume I have to add the cards to dvbapi ?
Is there a file to cover 0.8, 9, 13, 19, 23 E?
-
Thanks to the help on here got 28.2 working flawlessly in oscam. I have a multisat line which I currently have on cccam, so stop oscam and start cccam to use this (just usually use to watch the football so not used that much).
Anyway to have this in oscam without too much messing about? Need to cover majority of euro sats if its easy enough
Thanks
-
thats sorted it matey, thank you so much!
-
Right. Started from scratch with a clean software flash and the oscam file provided above. Still not clearing, here's my log;
dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 3 enabled and 0 disabled ecmpids!
2015/12/03 19:34:49 20236530 c (dvbapi) Demuxer 0 trying to descramble PID 2 CAID 0960 PROVID 000000 ECMPID 0505 ANY CHID PMTPID 0104 VPID 0203
2015/12/03 19:34:50 20236530 c (ecm) linuxsatsupport (0960@000000/FFFF/122D/63:8CC1F000563A4079895A2875BC8BA495): not found (2 ms) by Xxx.xxx.xxx (F/2/2/2) - History
2015/12/03 19:34:50 20236530 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0963 PROVID 000000 ECMPID 0505 ANY CHID PMTPID 0104 VPID 0203
2015/12/03 19:34:50 20236530 c (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 0961 PROVID 000000 ECMPID 0505 ANY CHID PMTPID 0104 VPID 0203
2015/12/03 19:34:51 20236530 c (ecm) linuxsatsupport (0963@000000/FFFF/122D/63:00000000000000000000000000000000): rejected caid (1 ms) - History (invalid caid 0x0963)
2015/12/03 19:34:51 20236530 c (-) -- Skipped 1 duplicated log lines --
2015/12/03 19:34:51 20236530 c (dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 3 enabled and 0 disabled ecmpids!
2015/12/03 19:34:51 20236530 c (dvbapi) Demuxer 0 trying to descramble PID 2 CAID 0960 PROVID 000000 ECMPID 0505 ANY CHID PMTPID 0104 VPID 0203
2015/12/03 19:34:51 20236530 c (ecm) linuxsatsupport (0960@000000/FFFF/122D/63:8CC1F000563A4079895A2875BC8BA495): not found (1 ms) by Xxx.xxx.xxx (F/2/2/2) - History
2015/12/03 19:34:52 20236530 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0963 PROVID 000000 ECMPID 0505 ANY CHID PMTPID 0104 VPID 0203
2015/12/03 19:34:52 20236530 c (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 0961 PROVID 000000 ECMPID 0505 ANY CHID PMTPID 0104 VPID 0203
2015/12/03 19:34:52 20236530 c (ecm) linuxsatsupport (0963@000000/FFFF/122D/63:00000000000000000000000000000000): rejected caid (1 ms) - History (invalid caid 0x0963)
2015/12/03 19:34:53 20236530 c (-) -- Skipped 1 duplicated log lines --
2015/12/03 19:34:53 20236530 c (dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 3 enabled and 0 disabled ecmpids!
2015/12/03 19:34:53 20236530 c (dvbapi) Demuxer 0 trying to descramble PID 2 CAID 0960 PROVID 000000 ECMPID 0505 ANY CHID PMTPID 0104 VPID 0203
2015/12/03 19:34:53 20236530 c (ecm) linuxsatsupport (0960@000000/FFFF/122D/63:8CC1F000563A4079895A2875BC8BA495): not found (1 ms) by xxx.xxx.xxx (F/2/2/2) - History
2015/12/03 19:34:54 20236530 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0963 PROVID 000000 ECMPID 0505 ANY CHID PMTPID 0104 VPID 0203
2015/12/03 19:34:54 20236530 c (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 0961 PROVID 000000 ECMPID 0505 ANY CHID PMTPID 0104 VPID 0203
2015/12/03 19:34:54 20236530 c (ecm) linuxsatsupport (0963@000000/FFFF/122D/63:00000000000000000000000000000000): rejected caid (1 ms) - History (invalid caid 0x0963)
2015/12/03 19:34:54 20236530 c (ecm) linuxsatsupport (0963@000000/FFFF/122D/63:00000000000000000000000000000000): rejected caid (0 ms) - History (invalid caid 0x0963)
2015/12/03 19:34:54 20236530 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 3 enabled and 0 disabled ecmpids!
2015/12/03 19:34:54 20236530 c (dvbapi) Demuxer 0 trying to descramble PID 2 CAID 0960 PROVID 000000 ECMPID 0505 ANY CHID PMTPID 0104 VPID 0203
2015/12/03 19:34:55 20236530 c (ecm) linuxsatsupport (0960@000000/FFFF/122D/63:8CC1F000563A4079895A2875BC8BA495): not found (1 ms) by Xx.xx.xx (F/2/2/2) - HistoryOnly thing I've done is the server config. Perhaps it's me here... Anyone have a template for a client version of this file?
-
Will try new config files, thanks. Here's my log as is
* Status Live Log Config Readers Users Services Files Failban CacheEX Scripts Restart
*
* 2015/12/01 18:13:43 00000000 s (main) System name = Linux
* 2015/12/01 18:13:43 00000000 s (main) Host name = vusolo2
* 2015/12/01 18:13:43 00000000 s (main) Release = 3.13.5
* 2015/12/01 18:13:43 00000000 s (main) Version = #1 SMP Thu Nov 19 16:36:06 GMT 2015
* 2015/12/01 18:13:43 00000000 s (main) Machine = mips
* 2015/12/01 18:13:43 00000000 s (main) Stb model = dm8000
* 2015/12/01 18:13:43 00000000 s (main) Stb vumodel = vusolo2
* 2015/12/01 18:13:43 00000000 s (main) Stb boxtype = vusolo2
* 2015/12/01 18:13:43 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 11788
* 2015/12/01 18:13:43 00000000 s (config) services reloaded: 0 services freed, 1 services loaded, rejected 0
* 2015/12/01 18:13:43 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
* 2015/12/01 18:13:43 00000000 s (main) signal handling initialized
* 2015/12/01 18:13:43 00000000 s (config) 933 service-id's loaded in 5 ms
* 2015/12/01 18:13:43 00000000 s (net) cccam: initialized (fd=5, port=12000)
* 2015/12/01 18:13:43 00000000 s (reader) xxx.xxx.xxx[newcamd] creating thread for device xxx.xxx.xxx
* 2015/12/01 18:13:43 00000000 s (reader) xxxx.xxx.xxx [newcamd] creating thread for device xxx.xxx.xxx
* 2015/12/01 18:13:43 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
* 2015/12/01 18:13:43 00000000 s (main) waiting for local card init
* 2015/12/01 18:13:43 562E3DBB p (newcamd) proxy xxxx.xxx (fd=0)
* 2015/12/01 18:13:43 562E3DBB p (reader) xxx.xxx.xx[newcamd] proxy initialized, server xxx.xxx.xxx:xxxx
* 2015/12/01 18:13:43 187B2D09 h (webif) webif: decompressed 165934 bytes back into 395208 bytes
* 2015/12/01 18:13:43 5A391DCF p (newcamd) xxx.xxx.xx:xxx newcamd525 (fd=0)
* 2015/12/01 18:13:43 5A391DCF p (reader) xxx.xxx.xxx [newcamd] proxy initialized, server xxx.xxx.xxx:xxx
* 2015/12/01 18:13:43 187B2D09 h (webif) HTTP Server running. ip=0.0.0.0 port=5731
* 2015/12/01 18:13:44 00000000 s (main) init for all local cards done
* 2015/12/01 18:13:44 00000000 s (emmcache) loading emmcache disabled since no reader is using it!
* 2015/12/01 18:13:44 00000000 s (emmcache) loading emmstats disabled since no reader is using it!
* 2015/12/01 18:13:44 00000000 s (anticasc) anti cascading disabled
* 2015/12/01 18:13:44 4321DD3B c (client) plain dvbapi-client granted (linuxsatsupport, au=off)
* 2015/12/01 18:13:44 4321DD3B c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)- - - Updated - - -
Ok, used newer config files and now get this
0000 - Provider # 1
2015/12/01 18:32:05 406E41D8 p (newcamd) Provider ID: 000000 - SA: 00000000
2015/12/01 18:32:05 5928452E c (ecm) linuxsatsupport (0960@000000/FFFF/132B/63:A22BC239B94FF8AE29B5AF0CE7A02C0E): not found (167 ms) by xxx.xxx.xxx
(F/2/2/2) - Sky Sports News HQ
2015/12/01 18:32:05 5928452E c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0963 PROVID 000000 ECMPID 0513 ANY CHID PMTPID 0101 VPID 0201
2015/12/01 18:32:05 5928452E c (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 0961 PROVID 000000 ECMPID 0513 ANY CHID PMTPID 0101 VPID 0201
2015/12/01 18:32:50 5928452E c (dvbapi) ERROR: error on poll of 1 fd's (errno=2 No such file or directory)
2015/12/01 18:33:05 406E41D8 p (reader) Xxx.xxx.xxx [newcamd] disconnected: reason inactivity
2015/12/01 18:33:05 169BEABC p (reader) Xxx.xxx.xxx [newcamd] disconnected: reason inactivity
2015/12/01 18:33:52 5928452E c (dvbapi) ERROR: error on poll of 1 fd's (errno=2 No such file or directory)
2015/12/01 18:37:22 5928452E c (-) -- Skipped 3 duplicated log lines -- -
Right, set up and all running fine. Then watched a FTA channel for a bit, back to pay channel and doesn't clear?
Tried to access webif and its like the cam isn't running, page not available. Stopped and started cam but nothing
Edit: OK restarted it again and worked for a minute then stopped again
- - - Updated - - -
Just to confirm, do I take the config files from here - http://linuxsat-support.com/showthread.php?t=3271
Then just edit the oscam.server file and add my details. Do I keep what's in the file already and add new lines or delete and use just my info?
Sorry for the noob questions but would really like to get this working. Lot more stable then other cams
-
Im using OpenViX 3.2.021
It is a virtual card/share in use. Two lines in server file
Did notice yesterday in webif that it added /par on the end of all the lines in the server file
Deleted all these through the webif and worked fine. Then stopped again. At work so can't check these files ATM
Did set permissions to 755 via FTP also
-
Just got my head into setting up Oscam. Got a template from here for the 4 files needed for Sly UK and dropped them in etc/tuxbox after editing in my info
Everything working great. Then I change a channel or switch on the box in the morning and doesn't seem to be working, unable to access web interface.
Cam is shown as running. Stop/start the cam and still no joy. Got both oscam and oscam-latest installed, switch from one to the other and works again.
Any ideas please?