ON VU+ Zero 4k ARM/IPK IT Work perfect on VTI image
just difrence between 13.2_r1 & 13.2_r0 are etiding on ncam.server & dvb files
Hi, what image and skin u r using? Also could you send me the Ncam 13.2_r1 link for VU+ Zero 4K
Posts by maurer
-
-
Doesn't work on BlackHole at all
-
Someone with VU+ Zero 4K with latest BlackHole image that icam works?
If does, please send me right oscam .ipk file with latest config files.
Thank you!
-
Pozz imaš možda u .ipk fajlu za instalaciju? Tnx!
I što se točno promijenilo u odnosu na ovu verziju od četvrtka?
Također ako imaš najnovije config fajlove, možeš mi poslat ako nije problem?
Isto tako za VU+ Zero 4K BlackHole, da li radi ovo na njemu ako znaš? Kao rekli su mi da radi na OpenATV, al mi ni tamo nije radilo, a opet taj image mi ne sjeda nikako.
-
Anyone tried with BlackHole?
-
Hi,
with latest Oscam 11.693 does PowerVU works? I tried latest config from MohamedOS. With version 11.691 PowerVu works, now it doesn't
-
Doesn't open the channels on Vu+ Zero 4K (arm) with BlackHole latest image...
For now Ncam 11.9 working the best
-
also not working on Vu+ Zero 4K
-
Display MoreDisplay More
The best config?? Definitely the worse...unwatchable
We are waiting for the best that you will offer us
Hi,
in attachment is my config which is best for watching without PoverVU.
Now is the question which line from ncam.config need to add or edit to work with PoverVU?
Tnx!
Since you have the best and you have the experience of the work of it, we are waiting for you to answer your question is better to leave this topic who holds the worst and open the subject in your name.
For the science these config by the emu developer and another group worked with him but it seem to do not like you because you have the best we will see that with your subjectWhatever :thumbup:
-
The best config?? Definitely the worse...unwatchable
We are waiting for the best that you will offer us
Hi,
in attachment is my config which is best for watching without PoverVU.
Now is the question which line from ncam.config need to add or edit to work with PoverVU?
Tnx!
-
The best config?? Definitely the worse...unwatchable
-
Finally, MaxTV, TotalTV, SkyDE and PowerVU Discovery works without freezing with Oscam 11684
-
For version 11.6 if I add paid C line into ncam.fs does it need to have reader for same line in ncam.server?
-
"The LATEST OSCAM-EMU FOR VARIOUS PLATFORMS" are you blind or what???
-
-
yup I setup the new pass and is ok
-
What is username and password to connect over FTP??
I tried username: root and password is blank, but cannot connect!!
-
Ok, upload your config
-
I am using Vu+ Zero 4K
Also with extended_cw_api =1 it was the same...
-
Display MoreDisplay More
I have problems with PowerVU Discovery channels
When I have in oscam.conf this settings Sky DE is working, but PowerVU doesn't:
[global]
logfile = stdout;/tmp/oscam.log
nice = -5
maxlogsize = 128
waitforcards = 0
preferlocalcards = 1
disablecrccws_only_for = 0500:030B00;1819:00006D;09C4:000000;098C:000000;1884:000000;1811:003311,003315;1883:003311;1819:00006D
[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
request_mode = 1
user = Receiver
read_sdt = 2
boxtype = dreambox
[cache]
[webif]
httpport = 4115
httphelplang = de
httprefresh = 10
httppollrefresh = 20
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 0.0.0.0-255.255.255.255
httposcamlabel = OSCam-Trunk
http_status_log = 1
and with this settings it is reverse, PowerVU working and Sky DE is freezeing every few seconds:
[global]
disablelog = 1
logfile = /dev/tty
clienttimeout = 5000
clientmaxidle = 180
netprio = 1
nice = -1
maxlogsize = 1000
waitforcards = 0
preferlocalcards = 1
dropdups = 1
[cache]
[newcamd]
port = 10001@
key = 0102030405060708091011121314
[cccam]
port = 12000
nodeid = 4736728B103213F0
version = 2.1.4
stealth = 1
[streamrelay]
stream_relay_enabled = 0
[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
request_mode = 1
delayer = 60
user = dvbapiau
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 1
boxtype = vuplus
[webif]
httpport = 8888
httpuser =
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 127.0.0.1,192.1.0.0-192.168.255.255
What would be the solution for this?
I do have this config and it work well
[global]
logfile = /tmp/oscam.log
#logfile = stdout
nice = -1
maxlogsize = 1024
waitforcards_extra_delay = 100
preferlocalcards = 1
readerrestartseconds = 3
block_same_ip = 0
block_same_name = 0
ecmfmt = P: c:p:s:d:i: #ECM_L:l #CW=w HOP:j
disablecrccws_only_for = 098C:000000;09C4:000000;098D:000000;0500:030B00,032830,041950,042800,042820,050F00,051A00;1811:003311,003315;1819:00006D;1884:000000
disablecrccws = 1
[cs378x]
port = 13001
suppresscmd08 = 1
[newcamd]
port = 12121@0000
key = 0102030405060708091011121314
mgclient = 1
[cccam]
port = 12000
nodeid = 24D5EF28108C14E0
version = 2.3.0
reshare = 0
#reshare_mode = 0
#stealth = 1
[streamrelay]
stream_relay_enabled = 0
[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
delayer = 60
ecminfo_type = 1
user = dreamosat
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 2 #[ (1) = OE2.2/2.5 AND (2) = OE2.0 ] here 2 for OE2.0 and 1 for OE2.2/2.5
boxtype = dreambox
[webif]
httpport = 8888
httprefresh = 10
httpallowed = 10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255,192.168.0.0-192.168.255.255,127.0.0.1
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
Try may work for you
That one mess everything. Ahh ok, I will use Ncam and OScam...
