Posts by bluepirre

Been struggling to get this setup to work.

I´ve got the card working just fine in the internal reader of the DB but I don`t wanna use this cause afraid of burning the card.

My setup is:

800SE Original
Newnigma 3.2.2
Oscam using dvbapi

Smargo v1.4 reader settings: Auto and dreambox kernel.
I think I´ve got all usb kernels installed (the ones from online softmanager)

Here´s my log:

2011/09/15 12:02:51 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #5944 (mips-tuxbox-linux)
2011/09/15 12:02:51 0 s version=1.20-unstable_svn, build #5944, system=mips-tuxbox-linux, nice=-10
2011/09/15 12:02:51 0 s client max. idle=120 sec, debug level=0
2011/09/15 12:02:51 0 s max. logsize=1000 Kb, loghistorysize=4096 bytes
2011/09/15 12:02:51 0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2011/09/15 12:02:51 0 s Cannot open file "/etc/tuxbox/config/oscam.services" (errno=2 No such file or directory)
2011/09/15 12:02:51 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2011/09/15 12:02:51 0 s signal handling initialized (type=sysv)
2011/09/15 12:02:51 0 s can't open file "/etc/tuxbox/config/oscam.srvid" (err=2 No such file or directory), no service-id's loaded
2011/09/15 12:02:51 0 s can't open file "/etc/tuxbox/config/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
2011/09/15 12:02:51 0 s can't open file "/etc/tuxbox/config/oscam.provid" (err=2 No such file or directory), no provids's loaded
2011/09/15 12:02:51 0 s can't open file "/etc/tuxbox/config/oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
2011/09/15 12:02:51 0 s monitor: initialized (fd=6, port=988)
2011/09/15 12:02:51 0 s camd35: disabled
2011/09/15 12:02:51 0 s cs378x: disabled
2011/09/15 12:02:51 0 s newcamd: initialized (fd=7, port=34000, crypted)
2011/09/15 12:02:51 0 s -> CAID: 093E PROVID: 000000
2011/09/15 12:02:51 0 s radegast: disabled
2011/09/15 12:02:51 0 s http thread started
2011/09/15 12:02:51 0 s reader check thread started
2011/09/15 12:02:51 0 s check thread started
2011/09/15 12:02:51 0 s creating thread for device /dev/ttyUSB0
2011/09/15 12:02:51 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2011/09/15 12:02:51 0 s waiting for local card init
2011/09/15 12:02:51 540028 h HTTP Server listening on port 10001
2011/09/15 12:02:53 53E838 r reader viasat initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2011/09/15 12:02:55 0 s init for all local cards done
2011/09/15 12:02:55 0 s anti cascading disabled
2011/09/15 12:02:55 5421E8 c plain dvbapi-client granted (localuser, au=on (1 reader))
2011/09/15 12:02:55 5421E8 c dvbapi: 3 entries read from oscam.dvbapi
2011/09/15 12:03:17 5421E8 c dvbapi: [ADD PID 0] CAID: 090F ECM_PID: 1FA3 PROVID: 000000
2011/09/15 12:03:17 5421E8 c dvbapi: [ADD PID 1] CAID: 093E ECM_PID: 1FA2 PROVID: 000000
2011/09/15 12:03:17 5421E8 c dvbapi: new program number: 1F9A (090F:1F9A unknown)
2011/09/15 12:03:17 53E838 r Error processing ecm for caid 093E, srvid 1F9A (servicename: 093E:1F9A unknown) on reader viasat.
2011/09/15 12:03:17 5421E8 c dvbapi: try pids again #1
2011/09/15 12:03:17 5421E8 c localuser (093E&000000/1F9A/88:2952): not found (4 ms) by viasat (of 1 avail 1)
2011/09/15 12:03:17 5421E8 c dvbapi: try pids again #2
2011/09/15 12:03:17 5421E8 c localuser (093E&000000/1F9A/88:2952): not found (0 ms) by viasat (of 1 avail 1)
2011/09/15 12:03:17 5421E8 c dvbapi: try pids again #3
2011/09/15 12:03:17 5421E8 c dvbapi: can't decode channel
2011/09/15 12:03:17 5421E8 c localuser (093E&000000/1F9A/88:2952): not found (0 ms) by viasat (of 1 avail 1)

oscam.conf

[global]
usrfile = /emu/log/oscamuser.log
logfile = /var/log/oscam.log
disablelog = 0
disableuserfile = 1
fallbacktimeout = 2500
Nice = -10
WaitForCards = 1
PreferLocalCards = 1
saveinithistory = 1

# logging
#pidfile = /var/run/oscam.pid
logfile = /var/log/oscam.log
usrfile = /var/log/oscamuser.log
cwlogdir = /var/log/cw.log
maxlogsize = 1000

[monitor]
port = 988
monlevel = 4
nocrypt = 127.0.0.1

[webif]
httpport = 10001
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255

[newcamd]
Key = 0102030405060708091011121314
Port = 34000@093E:000000

[dvbapi]
enabled = 1
boxtype = dreambox
user = localuser
au = 1
request_mode = 0

-----------------------------------------------------------

oscam.server

[reader]
label = viasat
protocol = mouse
device = /dev/ttyUSB0
caid = 093E
boxid = xxxxxxxx
detect = cd
mhz = 357
ident = 093E:000000
group = 1
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
blockemm-unknown = 1

-----------------------------------------------------------

oscam.user

[account]
user = localuser
group = 1
uniq = 0
monlevel = 0
au = viasat
caid = 093E
ident = 093E:000000
group = 1

---------------------------------------------------------------

oscam.dvbapi

P: 093E:000000 # prioritise CAID 0100 with provider 123456

#P: :093E # prioritise ECM with provider ID 1234 on
# on any CAID and service

P: 093E # prioritise CAID 0200

#P: 093E:000000 # prioritise CAID 0300 on service 9ABC only

#M: 093E 093E:000000 # map CAID 0400 to provider ID 123456 with
# CAID 0500

#D: 0600 200 # wait 200 ms before writing CW for CAID 0600

#I: :654321 # ignore provider ID 654321 for every CAID and
# service

I: 0 # ignore every CAID that was not handled before

#L: 0700 8e # ECM length for CAID 0700 to 8e (hexadecimal)

Yes I have and my box finds it under "Devicemanager"

Mode:Autoswitch
Kernel: Dreambox
Device: ttyUSB0
Firmvare v1.3
nan Mhz

What was new that happend on the screen now is that up on the left corner says: I S N V CO BC CW DCNDS with NDS highlighted.

Yes I did like this:

#ALLOW TELNETINFO: no
ALLOW WEBINFO: yes

# Show extended client info when showing client list
# default is yes
#
#SHOW EXTENEDED CLIENT INFO : no

# The webinfo service can be protected with a username and password.
# This is switched off by default
#
WEBINFO USERNAME : xxxxx
WEBINFO PASSWORD : xxxxx

And installed CS studio,

But this is what I get:
1 0.0% 127.0.0.1:44445 <> ? -- OFFLINE -- - -
2 0.0% 127.0.0.1:34001 <> ? -- OFFLINE -- - -
3 0.0% 127.0.0.1:34000 <> ? -- OFFLINE -- - -
4 0.0% 127.0.0.1:15000 <> ? -- OFFLINE -- - -

Sorry, but where do I find the cccam info details, I've installed the plugin and all but cant find where to access it.

The only things allowed in cccam config below

#N: <ip> <port> <username> <pass> <des(14byte)> <nr_of_hops_away (default: 1)> <stealth mode (default: 0)>
#
# example:
#
N: 127.0.0.1 44445 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
#
# add a newcamd card, give it an offset of 2 hops, in the share list
#
# N: 127.0.0.1 10000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 2
#
# stealthy login on newcamd server:
#
# N: 127.0.0.1 10000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 1 1
#
# stealth modes: 0 = disabled, 1 = mgcamd new, 2 = mgcamd old, 3 = evocamd, 4 = generic

# uper slot with newcs
N: 127.0.0.1 34001 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14
# lower slot with newcs
N: 127.0.0.1 34000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14
#
# mpcs for 1833to1702
N: 127.0.0.1 15000 mpcs dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14

and

#SERIAL READER : /dev/tts/0

#Smargo USB Support
SERIAL READER : /dev/usb/tts/0 smartreader+
#SERIAL READER : /dev/usb/tts/1 smartreader+

Hey again,

Posting my oscam.log file cause theres no picture yet

---
OSCam cardserver started at Tue Sep 6 17:46:18 2011
-------------------------------------------------------------------------------
2011/09/06 17:46:18 2AAC6C10 s >> OSCam << cardserver started version 1.00-unstable_svn, build #4842 (mipsel-oe-linux)
2011/09/06 17:46:18 2AAC6C10 s version=1.00-unstable_svn, build #4842, system=mipsel-oe-linux, nice=-1
2011/09/06 17:46:18 2AAC6C10 s client max. idle=120 sec, debug level=0
2011/09/06 17:46:18 2AAC6C10 s max. logsize=200 Kb
2011/09/06 17:46:18 2AAC6C10 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2011/09/06 17:46:18 2AAC6C10 s couldn't open statistics file: /emu/log/oscamuser.log
2011/09/06 17:46:18 2AAC6C10 s auth size=4976
2011/09/06 17:46:18 2AAC6C10 s Cannot open file "/etc/tuxbox/config/oscam.services" (errno=2)
2011/09/06 17:46:18 2AAC6C10 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2011/09/06 17:46:18 2AAC6C10 s signal handling initialized (type=sysv)
2011/09/06 17:46:18 2AAC6C10 s can't open file "/etc/tuxbox/config/oscam.srvid" (err=2), no service-id's loaded
2011/09/06 17:46:18 2AAC6C10 s can't open file "/etc/tuxbox/config/oscam.tiers" (err=2), no tier-id's loaded
2011/09/06 17:46:18 2AAC6C10 s can't open file "/etc/tuxbox/config/oscam.provid" (err=2), no provids's loaded
2011/09/06 17:46:18 2AAC6C10 s can't open file "/etc/tuxbox/config/oscam.ird" (errno=2) irdeto guessing not loaded
2011/09/06 17:46:18 2AAC6C10 s monitor: initialized (fd=7, port=988)
2011/09/06 17:46:18 2AAC6C10 s camd33: disabled
2011/09/06 17:46:18 2AAC6C10 s camd35: disabled
2011/09/06 17:46:18 2AAC6C10 s cs378x: disabled
2011/09/06 17:46:18 2AAC6C10 s newcamd: initialized (fd=8, port=44445, crypted)
2011/09/06 17:46:18 2AAC6C10 s CAID: 093E
2011/09/06 17:46:18 2AAC6C10 s provid #0: 000000
2011/09/06 17:46:18 2AAC6C10 s cccam: disabled
2011/09/06 17:46:18 2AAC6C10 s radegast: disabled
2011/09/06 17:46:18 2AAC6C10 s http thread started
2011/09/06 17:46:18 2AAC6C10 s creating thread for device /dev/ttyUSB0
2011/09/06 17:46:18 2AAC6C10 s loadbalancer: can't read from file /tmp/.oscam/stat
2011/09/06 17:46:18 2AAC6C10 s waiting for local card init
2011/09/06 17:46:18 2C6334B0 r reader thread started (thread=2C6334B0, label=viasat, device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2011/09/06 17:46:18 2BE334B0 h HTTP Server listening on port 8080
2011/09/06 17:46:20 2AAC6C10 s init for all local cards done
2011/09/06 17:46:20 2AAC6C10 s anti cascading disabled

Please advise

Ok, I will try it these confs within an hour when I get home and let you know how it turns out.

Don´t I need to input the boxid in the server file when using 093e card?

Ok, I´ve read that CCcam isn´t that optimal to use so I rather use another one. Do you know the best cam combo to use for my card?

Further, could you give me an example how the two lines should look in the conf to connect to eachother.

Great, I have the Viasat 093e card.

Right now I´m trying with the CCcam 2.1.4-Oscam combo.
At the moment I´m the only user, do I have to use N or L line in the configs now?
In the future I´ve plans of sharing my card (with my bedroom box:))

Hi,

Have tried a bit getting my smartreader to work with my 800se, but have a few questions. First of all, do I need to use/change anything in the cccam config when I use Oscam?

I know I have to change some in the oscam.config, server, and user right? Just have to figure out what.

I have configured the smargo smart reader and the dreambox recognises it in device manager.

Im using Newnigma latest image.

Please advise

Sincerely Pierre