great work my dear BILAL as usual .... i hope to see a lot of works here .. you have a good talent .... thanks for you and for my bro. ahmed moselhi
Posts by angel_heart
-
-
Dear Ahmed
it is working on my Spark 7162 (Truman top box-2 tuner)
thanks for you and BarviX for his efforts
Thanks to our wonderful friend / BarviX
We wish you your active and continuous participation in the forum with all of your experiences and knowledge in this field, so do not skimp on your brothers with it
Please thank our dear friend / BarviX for compiling this image & try it
openvision-enigma2-develop-10.2-r268-spark
We await another copy for our friends who have a 7162 processor
I installed the version on my device that has the processor 7162 on the external flash
using the plugin Nfr4X Multiboot of opennfr-5.3
The copy is wonderful. Everything works with it. All thanks and appreciation to our wonderful friend Barvix
To pass through the version after installation, you must be patient. The process takes 3 to 5 minutes
-
For whom face problem stopped feed
i 'd like to say don't worry
we are here for help you
for free
1- you can delete all files in extension /etc/opkg
and replace it with files in attached folder named opkg
2- add the attached folder lists in extension /var/lib/opkg
That's it ... Thank you very much to all the people who taught me how to give for nothing
-
thanks master
i 'll try with 16 GB and 32 GB flashes to split to every section approximately equal 1 GB by (Disk Genius)
i hope it will not damage my flashes
i hope it will help me to install a lot of images
but sometime drive sections doesn't appear
thanks at all efforts
-
My dear Ahmed
in fact , i know this post .
it was my first step to install enigma images on flash drive
but i split my flash (16 GB) to 14 parts by another program (Disk Genius) because the program create mini can split 8 parts maximum
as per steps in the mentioned post , you must do initialization after working on create mini to be one partition again
kindly tell me if i need to install more images . i must increase parts or not
what is the different between split and initialization ?
thanks
-
Dear Ahmed
Kindly advice about this message because the plugin of image opennfr-5.3 can install max 13 copy
i know other friends have 7111 and installed over 18 copy
i need to know where the problem at my STB or image ?
-
dear wai
all of us knowing that you are the compiler of this image
our bro bilal has repaired the missing of this image to make the image more adience
and he just help us to use your image on our weak devices by his efforts
please don't be angry we know your great efforts
thanks for all your efforts and thanks to bilal
-
thanks for the new version .
-
thanks dear
this copy working now on my 7162 spark (Truman top box 2 tuner)
by nfr4x multi-boot plugin on my external flash
-
-
dears .
i found this image included
NFR4XBoot-opennfr-6.4 plugin and worked without problem
i don't know how this plugin installed !!!!
openesi-8.6
http://www.mediafire.com/file/…oot-openesi%2529.zip/file
-
First, it is clear that you did not split the flash drive, yes, it is possible, but this will expose you to many risks in the future, including, for example, when you install an error copy on the flash drive and the flash stops working, this requires a reformatting of the flash drive in this case, you will be seen to do a reset of the entire flash because it is not Divided to do this on the part dedicated to the wrong copy and you will lose all copies on the flash drive
To work on 2 flashes, return to my post at the following link and read it completely well
For your information, I am still working on the version open nfr 5.3 and its plugin
What ahmed is saying is you did not PARTITION your USB memory stick, as explained carefully by both him and me.
As in, like this:
PREPARATION
One needs a USB stick, say 32GB, plugged into one's PC.
I partition it in 4 parts under Windows OS, using freeware MiniTool Partition Wizard:
I shall be formatting all 4 partitions in Linux system EXT4. Three of them 2GB each and forth partition gets the rest. That's enough for me... (If you want more than 3 images installed in USB stick, follow Ahmed's tutorial!)
Right click on the USB stick and
-delete all the partitions which might already be on it
-create 4 partitions for 3 images + one which will serve as a HDD, as explained above
-set them all as "active"
-apply all the changes (left upper corner) and wait patiently...
When done, properly dismount the USB stick from your PC and plug it into the SH4 STB's back USB port.
Inside your STB
The rest I shall demonstrate on PurE2 image: MENU > pManager > Device Manager > Mount Manager > mount them as follows:
When done, after every significant change - and this is one of those! - you MUST REBOOT (do not start from FSTAB, just restart your machine!)!
...and so on and on... and then, later on....
Rename enigma2 folder
As you will see from the screenshot (bottom right side), I opened a compressed file with WinRAR to show you what is inside. It contains a folder named enigma2.
All of such images have that, it's how it must be for installation from a USB stick.
However, in this case we can and we need to change it.
So, after I decompressed an image onto my PC, I have renamed the "enigma2" folder so it bears the name of the Team which produced it (upper right side)...
Send them on their merry way...
We can now move all 3 images into your STB.
More precisely, we shall move all 3 of them into the largest /hdd partition no. 4 of your USB stick, using FZC.The main reason for this is - you can not install an image onto the same partition where you placed that image.
It must be to a different partition than the one where you parked it...
Now, we are ready for installation of multiple images, using the Image Manager, which will - amongst other things - serve as a MultiBoot tool, as well.
So, start again but make sure you do not cut any corners, do exactly as described!
dears, ahmed gazye dear, gorski
thanks for your following
if you are talking about second flash disk 16 GB for image manager .
i had split it as per you have seen at the picture below
where is the problem at my work ?
about first flash disk for nfr4x plugin i don't understand what happened to this flash exactly i didn't split it because nfr plugin work on flash disk as one partition i had make steps for initialization as you explain here
-
dear ahmed
how can i solve this errors
firstly
i have these copies on my flash 8 GB created by NFR4XBOOT NFR 6.5
after using image manager to create another copies on another flash 16 GB , the flash 8GB was in receiver at this time
these copies doesn't work yet
i think copies kernels removed or deleted
how can i solve this errors to run these copies
on the other hand , when i want to use image manager and DuckBA i face these errors
-
great work thanks
-
dear angel_heart
I think that this defect is that the plugin cannot read flash
The flash drive must be reformatted again with the tools of the new version
Thanks Mr. Ahmed i 'll try to do the same thing .
and i 'll try to make backup of my copies to install at external flash by image manager or nfr plugins
-
-
dear Mr. Ahmed this copy working at 7162 external flash by (NFR4XBoot 6.5 ) plugin
thanks
-
My friends
openvision-enigma2-develop-extralanguage-gstreamer-10.1-r215-spark 7162_usb.zip
https://runigma.com.ua/feeds/i…5-spark7162.rootfs.tar.gz
https://runigma.com.ua/feeds/i….1-r215-spark7162_usb.zip
dear Ahmed after trying to use this version i have a big problem ..... exit button doesn't work yet
-
link
this program make 8 partitions only....
-
You mean version 6.4 with this link
plugin Nfr4X Multiboot of opennfr-6.5
Is there that version opennfr-6.5 for Spark devices or the version number is wrong
remote stopped working with this image Because you instalon this image on external flash by plugin Nfr4X Multiboot of opennfr-5.3 this image instalon on external flash by plugin imagemanager only or On the internal flash
Is what I expected correct
exactly ahmed installed by plugin Nfr4X Multiboot of opennfr-6.5 on external flash i 'll try to install it by imagemanager ... thanks
this version made by Ahmed Moselhi (Mr. sexyfootball #AFK#) with some issues . but i preferred 5.3 more
no dear this is new version 6.5
he will make updates for it after upload
join to this group us https://t.me/joinchat/LK4yqBlGpl5dxm3HEiVVGA