i know there is not the same ammount of cards to share these days but it still goes on, there doesent seem to be a really good forum to exchange cards, even this forum a while back was good to share, now its kind of the last place you would look to find share partners, what happened ?
Posts by lacierva
-
-
not much working on this plugin anyway,
no links to latest films , not very good
-
:joythink:
-
how can i block afn reader decoding pv on 4.8e, it kicks in now and then on 4.8 and leaves a glitch, watchable but annoying, on log, both readers are in use when afn reader is not needed.
Give different group numbers may help
perfect inspiral, solved the glitch thanks for the reply
-
how can i block afn reader decoding pv on 4.8e, it kicks in now and then on 4.8 and leaves a glitch, watchable but annoying, on log, both readers are in use when afn reader is not needed.
-
OK if you are interested , check that there are all the 27w enteries in the Constant.cw file and the Softcam.key file also oscam dvapi file if you want a working lamedb file I can send you one!
oscam-emu 11523, wont read constant.cw in etc/tux/conf says no such file when there is one, maybe its the vusolo2 as you run it on different box
-
Yes, I'm currently using oscam-emu version 11523. Maybe is not working with simple oscam. In every guide I have found they say you need oscam emu.
oscam-emu 11523 i had running today in openpli7, it opens afn on 9e, with appropiate keys, also powervu channels on 4.9e, as well as arena sport on 1.9e, but if you got bbc on 27w , then you have done really well, its beyond me, back to oscamymod me thinks, i think the ocam-emu patches are made for specific encryptions, so i will have to look for a specific biss oscam-emu, i dont think it can handle 2 different emm
-
so you are using oscam-emu ? not just normal oscam?,
if you are using oscam-emu which version ?
-
You have to add this to oscam.dvbapi file (no other settings are necessary for oscam, except correct keys in softcam.key file)
QuoteA:::1044:0064::: 2600:000000:1FFF # BBC One England
A:::107c:1004::: 2600:000000:1FFF # BBC One Scottland
A:::107d:13ec::: 2600:000000:1FFF # BBC One Northern Ireland
A:::107e:0c1c::: 2600:000000:1FFF # BBC One Wales
A:::10bf:00c8::: 2600:000000:1FFF # BBC Two England
A:::10c0:012c::: 2600:000000:1FFF # BBC Three
A:::1100:01f4::: 2600:000000:1FFF # BBC News
A:::1140:0a8c::: 2600:000000:1FFF # BBC Red Button
A:::11c0:0190::: 2600:000000:1FFF # BBC Four
A:::1200:02bc::: 2600:000000:1FFF # CBBC
A:::1240:0320::: 2600:000000:1FFF # CBeebies
A:::1280:0258::: 2600:000000:1FFF # BBC Parliament
A:::12fc:0AF0::: 2600:000000:1FFF # BBC Alba
A:::1c00:0384::: 2600:000000:1FFF # BBC Red Button 1
A:::1c40:0B86::: 2600:000000:1FFF # BBC Red Button 0
A:::4440:17d4::: 2600:000000:1FFF # BBC Two HD
A:::4484:19c8::: 2600:000000:1FFF # BBC One HD
A:::44c8:1838::: 2600:000000:1FFF # ITV 1 Central West HD
A:::4500:189c::: 2600:000000:1FFF # Channel 4 HD
A:::45c0:1964::: 2600:000000:1FFF # STV HD
A:::4600:1b58::: 2600:000000:1FFF # BBC Three HD
A:::46c0:1bbc::: 2600:000000:1FFF # CBBC HD
A:::4e80:1a90::: 2600:000000:1FFF # UTV HD
A:::4540:1900::: 2600:000000:1FFF # Channel 5 HD
A:::4F80:1D4C::: 2600:000000:1FFF # More4 +1
A:::4680:1DB0::: 2600:000000:1FFF # BBC Four HD
A:::433C:1E14::: 2600:000000:1FFF # BBC Scotland HD
A:::133C:0B54::: 2600:000000:1FFF # BBC ScotlandBut you will also need a use an appropriate lamedb file, or, after you scan the satellite, to add manually video and audio pid and make some changes is lamedb file.
And of course, before all of this, you have to install dvbsnoop via feed (opkg install dvbsnoop) and put the following scripts in /usr/bin:bbc_pmt_v6, bbc_pmt_starter.sh and enigma2_pre_start.sh.
-
BBC channels working on 27W in BISS with OScam emu
can you post your configs , using oscam-emu has been hard for me to set up on a vusolo2 with openpli7.1, or if anyone whome has it working on oscam -emu could post their config, now i mean oscam-emu not just normal oscam emu
-
looking for second hand vusolo2 and a vuzero
-
BT Sports SD & Racing TV SD still able to be shared.....
only 2 channels ?
-
is anything still left shareable on this sat ? or is all now paired to official box ? and if so is any one on here sharing it ?
-
i have had problems with such size dishes in the past, the wind can destroy them, some nice instalations though i forgot to say :thumbup:
-
m8 i think them slabs might move in a good windy storm, you might be back aligning it soon
-
doc
4f80:0cfdace7:1000:0001:22:0
film4+1
p:channel 4,c:001d4d,c:011d4e,c:031d4d,c:050001,c:091d510101,c:121d4e,c:2600,f:4
now if you already have this in your lamdb then probably the key is missing in key file, but check this first i have it working on my solo2 so i know its correct
-
can someone sell me an img for solo 2 set up for 27.5w i am not able to do it i dont have the skills nor the brains..(pensioner not too bright LOL) willing to pay thank you:xmas2:
hello again doc,
its much more easy now to set up 27w, just load the latest open pli image and oscam emu from the internal feeds and we can take it from there, ok
-
which version of oscam emu are you using? (i suppose that you are sure that you are using oscam-emu and not simple oscam).
than you just have to add a softcam.key file in the right directory (depends your image)
and maybe you have to do a few settings by oscam webif (set "stream relay" to off and try to change "API for extended CWs" and find the right one for your receiver)
georgeflu i am using a rather old oscamymod 1856 as i use it for biss encryptions on 27w , it has a key file but its not oscam-emu
oscamymod is an old one and can't decrypt powervu...
ahh i see,
thanks for your responses m8
-
which version of oscam emu are you using? (i suppose that you are sure that you are using oscam-emu and not simple oscam).
than you just have to add a softcam.key file in the right directory (depends your image)
and maybe you have to do a few settings by oscam webif (set "stream relay" to off and try to change "API for extended CWs" and find the right one for your receiver)
georgeflu i am using a rather old oscamymod 1856 as i use it for biss encryptions on 27w , it has a key file but its not oscam-emu
-
you do not need stream relay in solo2...
ahh ok,
could one of you you clever powervu memberspost a oscam config for this please, then i can play around with it, thanks for the replys so far, i never really got around to powervu, but with time on my hands for xmass would like to try to get it working merry christmas all