If you try and connect from inside your network with noip that want work.
Only works from traffic comming in from outside your router.
No need for host in Oscam settings
Open port in your router and point it to your Device with oscam (Ip Adress internal to device)
Add your NoIP config to router
Save and restart your router.
Now from outside your network you can use your NoIp adress from inside you still need to use your local adress.
Det är problemet clone boxar som är gamla ;)
Om dom har tillägget i sina feeder så skal du hitta det genom att öppna plugin browsern
Sen väljer du med röd knapp att hämta plugins.
Så skal du finna serviceApp under fliken "Extensions" finns den inte där så stöder int clone images serviceApp
a8p kan du använda Orginal images på så där skall du hitta serviceApp och Japhar images brukar var smock fulla så borde vara där också :)
Någon universal version av serviceApp finns inte som du kan använda i alla images så måste hitta den som passar til den image du använder.
Well keep the old and update the keys from that and then copy keyfile to your 6.3 no need to update the old if you only use it until a stable version of biss key updater is avalible :)
Gjör det och håll oss uppdaterade på hur det går :)
Your ATV image are to old and you need to change the one in Barry Allen to Latest ATV 6.3
Do not update the old one because then you might be in troubble ;)
I alla images baserad på OE 2.0 eller enkelt sagt alla images som inte er baserade på DreamOS
har du servicApp tillgänglig. Några images har den redan andra måstedu installera den från Plugin feeden.
Det är helt rätt du måste först installera serviceApp innan du får tillgång till den i JMX
För din DM525HD finns det fölgande images med stöd för serviceApp
OpenPLI
OpenATV
Tror också att det finns an OpenVison Image för DM520/525HD
Översikt på tillgängliga images hitta du här men var noga med att du väljer dom som är märkta "Orginal"
Annars så får du problem
Should work just fine to update your images in Barry Allen
I have done it several times and no issues :)
JediMakerXtream Frågor och Svar
Hejsan
Tenkte att det kanske va många som använder detta tillägget från KiddaC för att lägga in sina IPTV kanaler på sina Enigma2 baserade Satellit boxar.
Så jag tänkte att det kan vara folk som har frågor runt jedi men inte alla gillar att fråga på Engelska så startar denna tråden så skall jag svara så gått jag kan
på de frågor ni eventuellt skulle ha.
Inga frågor är dumma så här kan du fråga om allt och du ska få seriösa svar.
Jag läser Svenska, Norska och Danska så bara skriv i väg på ditt eget språk.
Finska och Islänska blir Google Translate ;)
This is the Vskin 1080 from KiddaC for OpenBlackhole 4.2 and up.
Skin is built on the original skin code & graphics by KiddaC
Skin is as close to the original look as possible.
a49a1d3.jpg 6711fb42261e0883.jpg
31005c.jpg965330841849784e.jpg
Download ipk file and install for settings and info read the thread for the original skin here: *UPDATED* Vskins 1080 (Install - FAQs)
For Toppics download the : enigma2-plugin-skins-slyk-toppicks_5.1_20190906_all.ipk
You need to run script in this order
1. skyscraper.sh
2. skypicker.sh
You find and run the scripts by press the GreenButton on your remote and then the BlueButton to open script menu.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
For any other settings pleas read the main thread by KiddaC: *UPDATED* Vskins 1080 (Install - FAQs)
Download Vskin-1080 here: enigma2-plugin-skins-obh-vskin-1080_2.03_20190907_all.ipk
Download Vskin-Bolt-1080 here: enigma2-plugin-skins-obh-vskin-bolt-1080_2.03_20190907_all.ipk
Download Vskin-Red-1080 here: enigma2-plugin-skins-obh-vskin-red-1080_2.03_20190907_all.ipk
Movie Planner by KIddaC is attached to this post
Yes and as i try to explain in my erlier post.
Its not illegal for you as a legal customer to put your CI+ mudule with legal smartcard into any device
But if we talk about lets say Telenor/CanalDigital Nordic they state that only legaly supported devices get support.
If you put your module and card into any not licens device then its your problem and you get no support.
Just call your customer service and ask for help with your Enigma2 based STB ;)
All thoose images that have built in CI+ support also use illegal hacked ssl certificate that emulate legaly licensed ssl certificate
Others have solved it with an open third-party plugin (CI+ helper) that do the same.
As long as DreamMultimedia or Vu+ dont legaly obtain an CI+ licens there will never be any legal support to give.
All images builders that add hacked licensed ssl to their build could be subject for legal issues and Team Blackhole have choosen
the easy way.
Zero support no legal issues now or in the future :)
No and there will never be any support but of cause there is allways the option to try any Ci+ Helper for OE Alliance based images
I have not try any my self but sure there must be one working.
And just to inform why there will be no CI+ support.
Its not in any way illegal to put your Common Interface (CI+) and subscription card into any divice of your choice.
But its illegal for in this case Team Blackhole to put any copyright protected drivers and ssl files into their image build.
And the policy of Team Blackhole have allways been to not give any support for whats illegal.
Then of cause using any third-party plugin is up to the users and Team Blackhole cannot be held responsible
for what users might do with their image.
And then next common question is, Why does CI+ work with Blackhole image?
Because Vu+ have for some reason added support thats working with some CI+ modules and Blackhole Image is built on the Vu+ stock image
Then Team Blackhole cannot be held responsible for what Vu+ is doing since they have not added anything to make it work.
But same policy for Blackhole image, Does it work, well lucky you. Does it not work take it up with Vu+ or your Provider :)
Hope this answers your question ;)
Best Regards Seagen
Thanks its easy to forget that we have alot of new users and a simple explaining like this is very helpfull :thumbup:
And thanks for sharing 
Maybe give a short description how to use this file since its not .deb for installation
I want to set the the importer to still work when I switch the vu off how do I do this
When you open EPG Importer in the settings screen activate Autoupdate
Then more options open up and you can set time and wake up your STB for updating epg
To answer your question you must be little bit more precis??
Cant understand your question
You find all the Armys skin for Blackhole 3.0.8 and later in the addons of the Blackhole Image.
If you use older image then Blackhole 3.0.8 its not compatible with any off the Army FHD Skins
GreenButton>>YellowButton>>Addons Download Manager>> Blackhole Image Skins
Probably not :)
But a new fresh image should do the trick to bring life back in to your Solo2
So my recommendation is to flash your solo2 with a new image of your choice
I'm in a similar boat, got an original Vu+ solo2 but think the tuner feed voltage is starting to go, so need to look at new box
need a twin satellite + IPTV box, liked the VU+ so was thinking about another one but which one ? or is the zgemma h9s a good box ?
All depend of Image you are custome to use. If you are a Blackhole or OpenBlackhole user both thoose images are exclusive for Vu+
And then i would recommend to buy a Vu+ 4K any model fitting your budget.
You get a fully packed Vu+Uno4Kse for a low price working very well with both satellite+iptv
And over at https://www.world-of-satellite.co.uk/ the store is packed with good offers and good STBs of many brands
ypeo You dont need to do any settings changes for servicename picons just upload them to same folder where your regular service ref picons are located. Both Images BH and OBH should locate them.
Vhanibal is settings are preset satellite settings ofte used by people with motor driven satdish even if they also is there for regular.
But Dex can surtenly explain this better but i assume he use those settings to referance the picons.
Easy way to test if the SNP picons are pickup is to backup your current working picon folder to your PC
Then on your STB delete all service ref picons and upload the service name picons
Restart Enigma2 if you have picons all is good and no more trouble
If you want to use any of the Armys FHD skin then Blackhole but at the same time any Open Alliance image is better for your Vu+ zero.
But if Armys skin is most important then its Blackhole :)
And have a look here KiddaC Skins KiddaC have some amazing skins for ATV
