Posts by PRINCIPAL

hello pls i need Toolchain_mipsel-tuxbox-linux.Dreambox.tar.bz2 this help will be seriously appreciated tks for this support inadvance.

u can just paste: find / -name CCcam.cfg

Sent from my TECNO R7 using Tapatalk

is possible to be in another directory. better to find it from via telnet. if still don't show up u can create it still

Sent from my TECNO R7 using Tapatalk

thanks so much

hello joeuser and the entire linuxsat this is me after a brief illness pls have still never get my autoroll set working with dm800 here is my files for any expert corrections:
VERSION: OSCam r11273

OSCAM.CONF
[global]
logfile = stdout
initial_debuglevel = 64
nice = -1
preferlocalcards = 1
emmlogdir = /etc/tuxbox/config/oscam/

[cache]

[streamrelay]
stream_relay_enabled = 0

[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
delayer = 60
ecminfo_type = 1
user = linuxsatsupport
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 2
boxtype = dreambox

[webif]
httpport = 8888
httptpl = /etc/tuxbox/config/tpl/
httprefresh = 30
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 192.168.0.0-255.255.255.255,127.0.0.1
http_status_log = 1

OSCAMUSER
[account]
description = dvbapi
user = linuxsatsupport
group = 1
keepalive = 1
au = 1

OSCAMSERVER
[reader]
label = emulator
protocol = constcw
device = /etc/tuxbox/config/oscam/constant.cw
caid = 090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
detect = cd
ident = 090F:000000;0500:000000,023800,021110,007400,007800;1801:000 000,007301,001101,002111;0604:000000;2600:000000;FFFF:000000 ;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
group = 1
emmcache = 2,2,2,0
emu_auproviders = 0604:010200;0E00:000000;4AE1:000011,000014,0000FE;1010:000000

[reader]
label = SoftCam.Key
protocol = emu
device = /etc/tuxbox/config/oscam/SoftCam.Key
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8 ,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000; 0500:000000,030B00,023800,021110,007400,007800;1801:000000,0 01101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:0 00000
group = 2

LOG
18:37:31 2C001A9E c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
18:37:32 2C001A9E c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1779 ANY CHID PMTPID 1920 VPID 1921
18:37:32 08E2B874 p (constcw) Searching CW for CAID 0E00 PROVID 000000 SRVID 006D ECMPID 1779 PMTPID 1920 VPID 1921
18:37:32 2C001A9E c (ecm) linuxsatsupport (0E00@000000/0000/006D/40:080C818D6C892ED65FDC1D38B4C4A090): rejected reader sid (2 ms) by emulator - HD Sport 24
18:37:33 2C001A9E c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 0 disabled ecmpids!
18:37:33 2C001A9E c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
18:37:34 2C001A9E c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1779 ANY CHID PMTPID 1920 VPID 1921
18:37:34 08E2B874 p (constcw) Searching CW for CAID 0E00 PROVID 000000 SRVID 006D ECMPID 1779 PMTPID 1920 VPID 1921
18:37:34 2C001A9E c (ecm) linuxsatsupport (0E00@000000/0000/006D/40:BD69339A2E9350A8D0414A212E4A81BC): rejected reader sid (3 ms) by emulator - HD Sport 24
18:37:34 2C001A9E c (dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 1 enabled and 0 disabled ecmpids!
18:37:34 2C001A9E c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
18:37:35 2C001A9E c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1779 ANY CHID PMTPID 1920 VPID 1921
18:37:36 08E2B874 p (constcw) Searching CW for CAID 0E00 PROVID 000000 SRVID 006D ECMPID 1779 PMTPID 1920 VPID 1921
18:37:36 2C001A9E c (ecm) linuxsatsupport (0E00@000000/0000/006D/40:387BADAE8A5512FE9701B804119F2FCB): rejected reader sid (3 ms) by emulator - HD Sport 24
18:37:36 2C001A9E c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 0 disabled ecmpids!
18:37:36 2C001A9E c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
18:37:37 2C001A9E c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1779 ANY CHID PMTPID 1920 VPID 1921
18:37:38 08E2B874 p (constcw) Searching CW for CAID 0E00 PROVID 000000 SRVID 006D ECMPID 1779 PMTPID 1920 VPID 1921
18:37:38 2C001A9E c (ecm) linuxsatsupport (0E00@000000/0000/006D/40:6029A4AD20C50DF8B630F5402DEA7487): rejected reader sid (3 ms) by emulator - HD Sport 24
18:37:38 2C001A9E c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 0 disabled ecmpids!
18:37:38 2C001A9E c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
18:37:39 2C001A9E c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1779 ANY CHID PMTPID 1920 VPID 1921
18:37:40 08E2B874 p (constcw) Searching CW for CAID 0E00 PROVID 000000 SRVID 006D ECMPID 1779 PMTPID 1920 VPID 1921
18:37:40 2C001A9E c (ecm) linuxsatsupport (0E00@000000/0000/006D/40:A0D703D8AFC1039D3D06DDBC4913E334): rejected reader sid (3 ms) by emulator - HD Sport 24
18:37:40 2C001A9E c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 0 disabled ecmpids!
18:37:40 2C001A9E c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
18:37:41 2C001A9E c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1779 ANY CHID PMTPID 1920 VPID 1921
18:37:42 08E2B874 p (constcw) Searching CW for CAID 0E00 PROVID 000000 SRVID 006D ECMPID 1779 PMTPID 1920 VPID 1921
18:37:42 2C001A9E c (ecm) linuxsatsupport (0E00@000000/0000/006D/40:4B581EAB6BAA9297B20B0A62C6B77A1E): rejected reader sid (4 ms) by emulator - HD Sport 24
18:37:42 2C001A9E c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 0 disabled ecmpids!
18:37:42 2C001A9E c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
18:37:43 2C001A9E c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1779 ANY CHID PMTPID 1920 VPID 1921
18:37:44 08E2B874 p (constcw) Searching CW for CAID 0E00 PROVID 000000 SRVID 006D ECMPID 1779 PMTPID 1920 VPID 1921
18:37:44 2C001A9E c (ecm) linuxsatsupport (0E00@000000/0000/006D/40:98A52CF6FCDF8A4F7C1B9D816F9AE21D): rejected reader sid (3 ms) by emulator - HD Sport 24
18:37:44 2C001A9E c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 0 disabled ecmpids!
18:37:44 2C001A9E c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
18:37:45 2C001A9E c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1779 ANY CHID PMTPID 1920 VPID 1921
18:37:46 08E2B874 p (constcw) Searching CW for CAID 0E00 PROVID 000000 SRVID 006D ECMPID 1779 PMTPID 1920 VPID 1921
18:37:46 2C001A9E c (ecm) linuxsatsupport (0E00@000000/0000/006D/40:64D7A8ED5D6922BF611C848860438A5A): rejected reader sid (4 ms) by emulator - HD Sport 24
18:37:46 2C001A9E c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 0 disabled ecmpids!
18:37:46 2C001A9E c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
18:37:47 2C001A9E c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1779 ANY CHID PMTPID 1920 VPID 1921

pls any help is welcome for me to also get this working with my dm800 thanks LINUXSAT

after re-edited my files to
server:
[reader]
label = emulator
protocol = emu
device = emulator
caid = 090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
detect = cd
ident = 090F:000000;0500:000000,023800,021110,007400,007800;1801:000000,007301,001101,002111;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
group = 1
emmcache = 1,2,31,1 # Recommended value = 2,2,2,0
emu_auproviders = 0604:010200;0E00:000000;4AE1:000011,000014,0000FE;1010:000000

user:
[account]
description = dvbapi
user = linuxsatsupport
group = 1
keepalive = 1
au = 1

conf:
[global]
logfile = /etc/tuxbox/config/oscam.log
initial_debuglevel = 65535
pidfile = /etc/tuxbox/config/oscam.pid
clienttimeout = 4000
clientmaxidle = 300
netprio = 1
nice = -1
maxlogsize = 10000
waitforcards = 0
preferlocalcards = 1
dropdups = 1
cwlogdir = /etc/tuxbox/config/
emmlogdir = /etc/tuxbox/config/

[cache]

[streamrelay]

[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
request_mode = 1
# delayer = 60
user = linuxsatsupport
read_sdt = 2
write_sdt_prov = 1
extended_cw_api = 2
boxtype = dreambox

[webif]
httpport = 8888
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 127.0.0.1,192.1.0.0-192.168.255.255
http_status_log = 1

the log is attached

what can i be missing? i need help

i will set it up tomorrow when i get back to my base. thanks once more the Big Joeuser

where do i see the groupid to setup my auto roll powervu SoftCam.Key on dm? help

hello experts pls is there a guide to know if the key is auto updating without waiting till the key is change. i mean to be sure the auto rolling setup on dm800 is working fine

root@dm800se:~# ls -al /usr/bin/oscam-svn11203-openpli40-webif-oscam-emu-patched
-rwxr-xr-x 1 root root 1352389 Jan 1 23:10 /usr/bin/oscam-svn11203-openpli40-webif-oscam-emu-patched

without permision
root@dm800se:~# /usr/bin/oscam-svn11203-openpli40-webif-oscam-emu-patched
-sh: /usr/bin/oscam-svn11203-openpli40-webif-oscam-emu-patched: Permission denied

i rename the file u posted after i extracted it to the existing working one in the dm then give it a permission and i restart it. with this: /usr/bin/oscam -b
error while loading shared libraries: rk: cannot open shared object file: No such file or directory

still no luck from my end. thanks

joeuser you have been so great help to all with a sincere mind to bring up the juniors precisely. i must be frank thanks. but nothing i can extract from the oscam-svn11203-openpli40-webif-oscam-emu-patched.tar.gz last post. kindly look at it again thanks God bless u more

am still surprise why some oscam of the same dm model work for some people and don't work for dm of the same model for some people. any way ve not get oscam without stream relay work for my dm800se with openpli4.0 image yet.

- - - Updated - - -

when i want to start oscam: error while loading shared libraries: _init: cannot open shared object file: No such file or directory
any help to fix this error message? please experts in the house please take a look for help

i am using openpli4.0 on one of the dm800se most of the oscam didn't work with my dreambox but this OSCam r10943 work great. i will like to try latest oscam if i get my dreambox display the powervu channel. i still never know how to fix this problem i don't want to keep using vlc on a separate pc to watch. thanks joeuser, i need more help.

thanks the links it also help but all my struggling still no success yet to get my dreambox display the powervu channel but work on my pc with vlc after adding the iptv to the bouquet. testing AFN on Intelsat 10-02 at 1.0°W. i filled the iptv from the m3u file i play the channel on my pc used the SID and also try change the ip to 127.0.0.1 i think right SID is my problem please more help

how can it work without any additional pc with vlc player to play the powervu channels from enigma2. any config correction for enigma2 receiver to show the powervu channels from it video output?