Great :-(
I'm guessing I'm screwed then and there is no way round it.
Posts by eclipse2000
-
-
There isn't one mate just on the back. I have another box which is smaller for the multi room box and this says drx890 on the rear but the main box i have doesn't say anything.
It's bigger than my PC tower its that old, dated 2008 on the back. -
It says SlyHD/Dir on the back. It's on of the first boxes that came out when HD was introduced.
-
Hi all, sorry for the delay in getting back to you.
Still no further on with getting our channels back, we have all the standard channels but nothing premium but Channel 5 HD does work OK.
To be honest we have only been running this for 4 weeks, the subscription has been active for 4 years but the Sly boxes have been unplugged for about 2 months while we moved house etc but before attempting this they were in normal Sly HD boxes, one standard and one multi-room.
I have just tested our Multi card in it's original box as we will be getting rid of this shortly anyway and all channels work fine but all we see is the "channel not subscribed" in the logs when attempting to view anything premium.Cheers
Paul -
Can anyone help.
-
Not sure if this is good or bad luck.
After taking almost 26 hours i now seem to have 17 entitlements at the side of my sly uk card, i seem to be able to watch most SD channels but i cannot see anything like movies, sports or HD.
Am i right in thinking this card will be paired and is no good?
Is there anything we can do, will the boxid feature work?
Gutted!! -
OK mate will do.
Cheers for the heads up :-) -
It's been over 24 hours now and still my card is not showing any entitlements.
-
Hi all,
I have just added my ***UK card to my Oscam server using a Smart reader. The server is happy so far as the reader shows CARDOK but no entitlements.
I can see they expired 18-11-13 as i have not used the card for a while although the subscription is active still.
I have setup my files as per a few configs i have found on this forum, see below.Quote
[global]
logfile = /var/log/oscam.log
nice = -1
preferlocalcards = 1[newcamd]
port = xxxxx@0963:000000
key = 0102030405060708091011121314
keepalive = 1[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = update[webif]
httpport = 8888
httpuser = xxxxxx
httppwd = xxxxxx
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255[lcd]
Quote
[account]
user = update
pwd = ents
description = Update Entitlements
group = 1
au = slyuk
caid = 0963
ident = 0963:000000
cccignorereshare = 0
keepalive = 1Quote
[reader]
label = slyuk
description = Reader
protocol = smartreader
device = 003:003
pincode = ****
smargopatch = 1
caid = 0963
ecmwhitelist = 0963:AA,AC,AD,AE,A0,BC,BF,EA,EC,E2,F0,FC,FD,A1,A2,A3,A4,A5,A6,A7,A8,A9,B0,B1,B2,B3,B4,B6,B7,B9,BA,C1,C3,C4,C7,C8,C9,D2,DC,D4,D5,D8,E4,1B,1C,1E,14,15,FFFFFFFF,19,2A,2B,2D,2E,2F,20,24,26,28,3A,3B,3E,3D,3F,30,32,33,34,35,36,37,38,39,3C,4A,4B,4C,4D,4E,4F,40,41,42,43,44,45,46,47,48,49,5A,5C,5D,5E,5F,50,51,52,54,56,57,58,59,6A,6B,6C,6D,6E,6F,60,61,62,63,64,65,66,67,68,69,7A,7B,7C,7D,7E,7F,70,71,72,73,74,76,77,78,79,8A,8B,8C,8D,8F,80,81,82,84,85,89,9A,9B,9D,9E,9F,90,91,92,93,94,96,98,99
detect = cd
mhz = 480
cardmhz = 357
ident = 0963:000000
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-g = 1
saveemm-u = 1
saveemm-s = 1Can you confirm this is all correct and if i leave the receiver on a subscribed channel it will update the entitlements.
-
Thanks for your reply masterG, Your help is much appreciated.
It's a Linux server with a Smargo reader through USB.
Mee@Kat, As stated in a few of my posts I'm new to all of this. I removed all IP information etc which i thought was sensitive so apologies for not removing the ports. Live and learn as they say!! -
OK great.
I have a sly card which is about 2 years old, its been running in a HD box (one of the first as its the big black ones that first came out) and is still active. Would this work?
:-)Thanks
-
OK after reading a little more in to it am i right in thinking by purchasing a card from *** this could be added using a Smargo reader to our linux box running our software and be shared between us, also offered back to forum members?
-
Thanks for your reply. Been a novice at this what is a "euro sub" to share.
-
Hi Musogeek, Thanks for your reply.
I did post in this section yesterday before making this post.
My friend has offered to do this but more of a learning curve really wanting to do it this way. -
Hi all,
I'm new to Oscam, we are running this so 3 of us can share a connection we have from a line which has been granted from a friend.
I have setup Oscam using this forum and everything looks to be working OK. Users are connected to the server OK and we can use the line OK from my friend but from time to time the connection drops. Users are still connected but it seems to be an issue with the line.
My friend cannot find any issues his end so i was wondering if i could have missed something on setup.
My setup is below. Be grateful if anyone has any pointers.oscam.conf
[global]
serverip = xx.xx.xx.xx
logfile = /var/log/oscam.log
unlockparental = 1
dropdups = 1
lb_mode = 1
lb_savepath =[newcamd]
port = xxxxxx@0963:000000
key = 0102030405060708091011121314
keepalive = 1[webif]
httpport = 8888
httpuser = admin
httppwd = xxxxxxxxxxx
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255[lcd]
Oscam.server
[reader]
label = xxxxxx
description = xxxxxx
protocol = cccam
device = xxxxxx,35001
key = 0102030405060708091011121314
user = xxxxxx
password = xxxxxx
caid = 0963
ident = 0000:000000
group = 1
cccversion = 2.0.11
cccmaxhops = 3
ccckeepalive = 1
cccreconnect = 0[reader]
label = xxxxxxxx
description = xxxxxxxx
protocol = cccam
device = xxxxxxxx,12050
key = 0102030405060708091011121314
user = xxxxxxxx
password = xxxxxxxx
caid = 0963
ident = 0000:000000
group = 1
cccversion = 2.0.11
cccmaxhops = 3
ccckeepalive = 1
cccreconnect = 0[reader]
label = xxxxxxxxxx
description = xxxxxxxxxx
protocol = cccam
device = xxxxxxxxxx,17500
user = xxxxxxxxxx
password = xxxxxxxxxx
fallback = 1
caid = 0963
ident = 0963:000000
group = 1
cccversion = 2.2.1
cccmaxhops = 5
cccwantemu = 1
ccckeepalive = 1
cccreconnect = 0Thanks