BissFeedAutoKey Plugin By momi133
Installation Help:
With an FTP tool send the BissFeedAutoKey.tar.gz file to /tmp folder then run these commands in telnet.
(paste each line one at a time, pressing enter after each)
rm -rf /usr/lib/enigma2/python/Plugins/Extensions/BissFeedAutoKey
mkdir /usr/lib/enigma2/python/Plugins/Extensions/BissFeedAutoKey
tar -xzf /tmp/BissFeedAutoKey.tar.gz -C /usr/lib/enigma2/python/Plugins/Extensions/BissFeedAutoKey
Description:
I've written this plugin based on feeds that are reported in sat-universe. After the feed freq is scanned and searched, user can use this plugin. when plugin is up, it shows all feed info that is reported in sat-universe like transponder,id,CW, 4:2:2 or 4:2:0, sport category ,game and somethings else and if you press OK button, The #CW key is inserted in Softcam.key file and softcam(like oscam,gcam,cccam,ncam or others) is restarted automatically if your plugin setting is ok, otherwise user should should restart your softcam manually.
Remote Control Button Help:
OK & Green : #CW key is inserted in Softcam.key file and softcam(like oscam,gcam,cccam,ncam or others) is restarted automatically
BLUE & Yellow: Show Setting Screen
RED & EXIT: EXIT PLUGIN
Option and Tips:
First of all, check plugin setting. Press Blue button and following screen will be displayed:
1. Config folder -> oscam.conf file -> [webif] section -> httpport = 8888
2. Config folder -> oscam.conf file -> [webif] section -> "127.0.0.1" must be in httpallowed section like(httpallowed = 127.0.0.1,192,168.0.0-192.168.255.255)
3- Please disable username and password in webif setting
>>> Please use following config: thanks levi45 oscam.conf
4- After config file setting was changed, softcam must be restarted manually to applying changes.
5.In setting screen, you should select folder of Softcam.key file(Default Folder: etc/tuxbox/config) and press ok button to save changes!
>>>Plugin delete keys that inserted by this plugin every 12 hours!
>>> If #CW not found by plugin, a screen will be displayed that request the CW code of feed or any Biss Encrypted channel!
After pressing ok button, key will be inserted in Softcam.key file and softcam(like oscam,gcam,cccam,ncam or others) is restarted automatically.
>>>when you type CW in box, lowercase or uppercase letters is not important.
>>>Some #CW keys of tv channels are existed, if you want to add your favorite Biss channels, please post full info of it in this thread.(minimum info: Full transponder and #CW)
-
Version 3.1
- momi133
- 3.33 MB
- 1.4k Downloads
Special Thanks to shr776 and @audi06_19
New update 3.1
--Compatible with Python3 images
--Add "Enable Reset Softcam Reader" to Setting.
--Fix some bugs
"Enable Reset Softcam Reader" : Just one reader is restarted. user should write correct reader name in setting.
"Disable Reset Softcam Reader" : All readers are restarted.
Installation Help:
Code1- rm -rf /usr/lib/enigma2/python/Plugins/Extensions/BissFeedAutoKey 2- mkdir /usr/lib/enigma2/python/Plugins/Extensions/BissFeedAutoKey 3- tar -xzf /tmp/BissFeedAutoKey.tar.gz -C /usr/lib/enigma2/python/Plugins/Extensions/BissFeedAutoKey
-
Version 2.8.0
- master G
- 5.65 MB
- 2.8k Downloads
Special thanks to Beta testers: shr776 , kalkan99,@marrakr, @HamidSoltai
New update 2.8
--Fix plugin Error due to over-traffic of Plugin HOST.
--Add "Reverse LNB" to Setting.
--Fix some bugs
-Use these telnet commands to install python-requests
OE2.5 IMAGES : apt-get install python-requests
OE2 IMAGES: opkg install python-requests
-
Version 2.7.0
- master G
- 5.65 MB
- 823 Downloads
Special thanks to Beta testers:@ Shr776 , kalkan99,@marrakr,@lex7791
New update 2.7
--Improvment in setting:Add Webif User/Pass to plugin Setting
--Fix plugin skin for VTI image.
--"piconSat" folder is deleted to reduce plugin size. Plugin Search "piconSat" folder in "/media/usb/" and "/usr/share/enigma2/"
--Fix some bugs
-
Version 2.5.1
- master G
- 9.24 MB
- 1.3k Downloads
Special thanks to Beta testers: Shr776 ,HamidSoltani,kalkan99
New update 2.5.1: Fixed Again by @audi06_19
--Fix For multilib images. Thanks to @audi06_19
--Improvment in setting.
--Fix IPTV bug.--Fix some bugs
-
Version 2.2.0
- master G
- 10.44 MB
- 1.2k Downloads
Special thanks to Beta testers: Shr776 ,Mehdi,cesaret244,kalkan99
New update 2.2
--Server address is changed to version 1.5. maybe vpn needed!
--New skin is designed to reduce plugin size.
--Use same skin for OE2 & DreamOS.
--if user uses Addkey plugin by mistake and key is not inserted by Addkey plugin, emulator isn't restarted.
--Improvment in search feeds in database especially for multi IDs feeds.
--Improvment in setting.
--Fix some bugs
-
Version 2.0.0
- master G
- 21.6 MB
- 1.2k Downloads
Special thanks to Beta testers: Shr776, hamid soltani, ,Mehdi,cesaret244
New update 2.0
--Server address is changed to linuxsat-support.com. No vpn needed! (Thanks master G)
--Improvment in search feeds in database especially for multi IDs feeds.
--Improvment in setting and it's skin. (Thanks audi06_19 for some codes)
--Plugin set weif IP:PORT according to config file! Also user can change them.
--FullHD skin is added to plugin
--User can disable "delete old keys" option
--if Addkey plugin is installed, if #CW not found and ok is pressed, Addkey plugin will be up to insert key manually! Otherwise input box will be up.(Thanks fairbird)
--If Found #CW is wrong and ok is pressed then feed will not be decrypted, user can insert new key manually by pressing ok again.
--If key inserted by Addkey plugin, when the user exits the plugin, Emulator is reset automatically and a massage will be appeared--Fix some bugs like iptv
Next update:
In next version, we will try to design new graphic and picons maybe deleted.
Also maybe a lite version will be released with small size.
-
Version 1.5.0
- master G
- 9.9 MB
- 2k Downloads
New update 1.5
--Plugin search Softcam.key directory and it's added to setting directories!
--If No softcam.key in STB, Plugin will show a massage in setting!
--Fix picon of satellite
--if user and pass are defined in webif setting, a warning massage will be appeared.
--Animated Channel name, sat and freq
--Fix some bugs
Next update:
In next version, we will try to improve search in database by plugin!
Also we will try to add keyboard to plugin for Manual mode
-
Version 1.3.0
- master G
- 10.25 MB
- 363 Downloads
New update 1.3
--Fix Picload to DreamOS by RAED
--Fix other function to DreamOS by me
--Fix "SHOW INFO FOR SOME IMAGES"
--Fix "No signal Error" after twice and more pressing ok!
--Fix black screen after leaving plugin!
--change delete time to 6 hrs
--Add some picons
--change plugin graphic for DreamOS
Next update:
****>Some users report directorys that are different from those in setting !
In next version, plugin search Softcam directory and it's added to setting! -
Version r-1.1
- master G
- 10.68 MB
- 536 Downloads
Removed Depends: nigma2 from control file, which was causing a dependency error during installation.
Added deb version for DreamOS Dreamboxes.
-
Version 1.1
- master G
- 5.12 MB
- 6 Downloads
Pabloisred
Do we require a username and password for this to work?
I've installed latest version on latest openvix image but asking me for username and password.
filaka
master G Author
The author hasn`t updated it in a very long time.
filaka
Thank you very much for your quick reply. P.s. do you have any tips for fe
eds so i don't have to enter the key manually??
adile
master G Author
Your image doesn`t provide the required dependency python-requests.
Try install in telnet opkg install python-requests or apt-get install python-requests
adile
I tried it in two ways, it didn't work
Version 2.5 works only does not update
master G Author
What didn`t work? Installation of the dependency or the plugin gives the same error?
adile
yes, I tried with telnet, the room gives the same error
adile
please fix host url for me in this version
add pls --Fix plugin Error due to over-traffic of Plugin HOST.
https://www.linuxsat-support.com/filebase/download/1212/
SiMeCaIs
i need your help with this error
"Some plugins are not available: ....."
amin333
Thanks
shr776
Thanks My Friend
You Did It
adhmucf
how to instal on Spark 7111STB ?
By Dream Explorer as usual ??!
master G Author
How to install an ipk on any enigma2 receiver
adhmucf
i installed it successfully on OpenPli 5.0 On Spark 7111STB
but when i opened it its Crash Enigma and I get Green screen
and this is link for the files on these Destenations Wich Written on Green Screen
https://www.mediafire.com/file…0h0h3p85/Crashes.rar/file
and sorry for my English :))
adhmucf
and this is "home/root/logs/enigma crash"
https://www.mediafire.com/file…crash_1559188274.rar/file
momi133 Author
Download latest version 1.3
Please post your problems in BissFeedAutoKey Plugin
thanks
Need2learn
Ok I have successfully installed it on Open 6.3 I can manually insert the Biss key and it works just fine,
I just can't get it to download a Biss key always says CW Not found??