vidim da u zadnje vrijeme ima dovoljno upita kako instalirati bootvideo u resiver.
Evo tutorijal.
za početak treba vam bootvideo-sphere-sgs_all.ipk( datoteka priložena )
ili ako koristite satvenus panel, od tamo možete skinuti direktno u resiver.
pripremite bootvideo i 3 mvi datoteke koje želite koristiti.
sada kreće pravi tutorijal!
Nakon instalacije bootvideo-sphere-sgs_all datoteke napravite reboot resivera
(kod ponovnog pokretana resivera vidjet ćete promjenu ).
sada idemo zamijeniti bootvideo i mvi datoteke koje ste odabrali.
1.pokrenuti DCC (ili što već koristite ).
2 putanja usr/share/vuplus-bootlogo
3.otvoriti vuplus-bootlogo folder i samo zamijeniti bootvideo i 3 mvi datoteke
sada ide drugi dio poslića koji je bitan da se vidi vaš bootvideo i bootlogo (slika )
- usr/share ( tu se nalaze 3 mvi datoteke ) koje morate obrisati i samo ubaciti vaš
backdrop.mvi.
nakon svega ovoga ponovno napravite reboot resivera i to je to.
kod pokretanja resivera vidjet ćete svoj odabrani bootvideo i bootlogo.
nadam se da sam vam ovim tutorijalom dovoljno pomogao.
ovo vrijedi za sve enigma2 resivere ( ne samo za vu+).
evo i priložene slike za bolje snalaženje.
-----------------------------------------------------------------------------------------
I see that lately there is enough query to install the bootvideo in the enigma2 receiver.
Here's the tutorial.
To get started you need bootvideo-sphere-sgs_all.ipk
or if you use a satvenus panel, from there you can download directly to the resiver.
Prepare the bootvideo and the 3 mvi files you want to use.
now the real tutorial is moving!
After installing the bootvideo-sphere-sgs_all file, make the reboot of the rescue
(you'll see a change for a resetable resiver).
now we are going to replace the bootvideo and mvi files you have selected.
1. Turn DCC (or whatever you are using).
2 paths usr / share / vuplus-bootlogo
3. open the vuplus-bootlogo folder and just replace the bootvideo and 3 mvi files
Now, another part of the job is going, which is important to see your bootvideo and bootlogo (image)
- usr / share (there are 3 mvi files) that you need to delete and just insert your
backdrop.mvi.
after all this, re-create the reboot reboot, and that's it.
When starting rescue, you will see your selected bootvideo and bootlogo.
I hope that I have helped you with this tutorial enough.
This applies to all enigma2 receivers (not just for woo +).
Here are the attached images for better use:
