How to flash a Full Image to DreamTV Mini UltraHD

Write a full image to a DreamTV Mini UltraHD from a PC using the Amlogic USB Burning Tool.

You can write a full image to your DreamTV Mini UltraHD from a PC using the Amlogic USB Burning Tool and a male-to-male USB cable.

Flashing the full image

  1. Open the Amlogic USB Burning Tool.
    File
    Amlogic USB Burning Tool
    Amlogic USB Burning Tool is a tool for windows operating system, which allows you to flash Stock Firmware on devices powered by Amlogic chipset.
    master G
  2. Choose the downloaded full image (.img) file via File → Open.
  3. Press Start.
  4. Turn off the STB and disconnect all the cables.
  5. Press and hold the recovery button.
  6. While holding it, connect a male-to-male USB cable between the PC and the STB's USB2 port.
  7. Once the USB Burning Tool shows the device in its list, release the recovery button.

⚠️ Don't interrupt the flash. Do not cut power during the procedure — wait for the device to finish and reboot on its own.

Like 1 Thanks 1