Openbox S9 HD PVR Firmwares

the latest firmware for the open box

1. Solve France HD channels cann't be played well
a. upgrade the firmware.
b. edit the replace.list like this:
X: { { 1811 } { 0100 } }
c. update the replace.list by mgcamd
2. Add hungarian ,correct french and russian language
3. solve the cccam's short characters problems, add from 17 to 32
4.Add much more CCCAM accounts,it can support 9 at most
5 Add NEWCAMD Server Setting,it can be taken as server

:download:

Updates 08.11.2010

:download:

Update 03.12.2010

Included in the Dump file is a multi-satellite channel list.
The channel list default setting is DisEqC 1.2.
Coverage of the channel list is: 45east to 30west.
Included in the zip file is a replace.list [German HD Channels okay on Astra]
The channel list can also be used on a fixed dish setup, simply click the Zoom or SatList button, and select any satellite from the data base that you wish to access.

================================================== =================================
What's New:
Updated christmas boot logo.
Updated channel list.
Sirius 5e renamed Astra 4A.
A number of channels added.
I believe all the channels that cause rebooting problems, have now been removed.
To optimize this list & receiver to it's full potential, you will require a full multi-sat coverage cline.

Instructions:
If this is the first time you have uploaded a Dump.file, then you will need to read the following instructions:-
1 Click Menu -> System Setup -> TV System -> Video Resolution this will return to the default setting of [1080i 60] after each upload, if your TV has a refresh rate of 50Mhz then set the video resolution to [1080i 50] and the picture will become clear now press exit
Now select Local Time Settings and set it as follows if your in the UK:
1 GMT Usage ... ON
2 GMT Offset .. UTC+00:00
3 Summer Time . OFF
now click exit and exit again
Now select Network Local Setting and if your router supports DHCP then set it to On
otherwise you will need to configure the settings manually, once you have set it up click Apply then exit
Finally click CCcam Plug Setting, if you already have an active cccam.cfg file transfer it to a USB Stick insert the stick into the USB connection on the rear of the receiver and click Update Files By USB then select Option 1 in the popup box and click the OK button then click the Yellow button and your cccam.cfg files will be transfered
Now you need to activate the files, click CCcam Plug Setting then Manage Config Files click Option 1 and select each file in turn and click the OK button when you have a tick next to the files you wish to activate then exit.
To finish the activation and configuration process you must now reboot your receiver, then once it has restarted all should be okay.
The channel list included in the HDS2_DUMP file includes the latest L53 multi-satellite channel list, this is by no means a finished list, and is still an ongoing project.
================================================== =================================

How to add the replace.list file.
Click Menu -> Network Local Settings -> MGCamd Plug Settings -> Update Files by USB
-> replace.list [MGCamd Plug] now click either the OK or Green button to select replace.list and place a check mark next to it, once the check mark or tick is visable click the Yellow button to upload.
You can then if you wish, check to see if the replace list has been correctly added, by clicking Manage Config Files and clicking on relace.list if all went well, you will see the following line X: {{ 1833 } { 1702 }}
================================================== =================================

:download:

Update 08.12.2010
Included in the Dump file is a multi-satellite channel list.
The channel list default setting is DisEqC 1.2.
Coverage of the channel list is: 45east to 30west.
Included in the zip file is a replace.list.
The channel list can also be used on a fixed dish setup, simply click the Zoom or SatList button, and select any satellite from the data base that you wish to access.

================================================== =================================
What's New:
Updated channel list.
Updated channel sETTINGS on 16E 13E 28E
I believe all the channels that cause rebooting problems, have now been removed.
To optimize this list & receiver to it's full potential, you will require a full multi-sat coverage cline.
================================================== =================================

Instructions:
If this is the first time you have uploaded a Dump.file, then you will need to read the following instructions:-
1 Click Menu -> System Setup -> TV System -> Video Resolution this will return to the default setting of [1080i 60] after each upload, if your TV has a refresh rate of 50Mhz then set the video resolution to [1080i 50] and the picture will become clear now press exit
Now select Local Time Settings and set it as follows if your in the UK:
1 GMT Usage ... ON
2 GMT Offset .. UTC+00:00
3 Summer Time . OFF
now click exit and exit again
Now select Network Local Setting and if your router supports DHCP then set it to On
otherwise you will need to configure the settings manually, once you have set it up click Apply then exit
Finally click CCcam Plug Setting, if you already have an active cccam.cfg file transfer it to a USB Stick insert the stick into the USB connection on the rear of the receiver and click Update Files By USB then select Option 1 in the popup box and click the OK button then click the Yellow button and your cccam.cfg files will be transfered
Now you need to activate the files, click CCcam Plug Setting then Manage Config Files click Option 1 and select each file in turn and click the OK button when you have a tick next to the files you wish to activate then exit.
To finish the activation and configuration process you must now reboot your receiver, then once it has restarted all should be okay.
The channel list included in the HDS2_DUMP file includes the latest L53 multi-satellite channel list, this is by no means a finished list, and is still an ongoing project.
================================================== =================================

How to add the replace.list file.
Click Menu -> Network Local Settings -> MGCamd Plug Settings -> Update Files by USB
-> replace.list [MGCamd Plug] now click either the OK or Green button to select replace.list and place a check mark next to it, once the check mark or tick is visable click the Yellow button to upload.
You can then if you wish, check to see if the replace list has been correctly added, by clicking Manage Config Files and clicking on relace.list if all went well, you will see the following line X: {{ 1833 } { 1702 }}
================================================== =================================

:download:

New Official Firmware [HDS2_CMT_1011161216]
Release date: 24 November 2010

What's New:
Added: CCcam priority option
On bootup: Now it only displays Server 1 - Server 2 - Server 3 etc etc inplace of your cline info
Security Password: When entering secure sections such as CCcam section you will need to enter the Password 0 0 0 0
Other: A number of minor fixes has also been addressed.
NOTE !!!!! the receiver will reboot if you attempt to make a dump file ....

And as this is an official release, you will be required to add your own channel list, replace.list and priority file.

:download:

cccam.prio

:download:

Improvements are stated as follows:
1.improve some reading problems with viaccess smartcards
2.improve speed for CCcam connect servers
3.add CCcam`s cccam.prio file to improve CCcam sharing HD channels
4.add Danish language

It is advisable to backup your channel lists first:

Dump the channels:
Menu >Tools > Dump by USB > Dump Mode: Misc Files > Select and Dump > TP_PROG.dbs > Add > Dump

then do the firmware update with the above file

then restore your channels as follows:

Menu > Tools > Upgrade by USB > Upgrade Mode: Misc Files > Select and Upgrade > TP_PROG.dbs > Add > Upgrade

Openbox s9 new firmware

-----------------------------------
- V1.08.75
______________________________
1. Cable, EPG fixes.
2. Satellite - Some minor bugs.
3. Satellite, European updated transponder list.
4. Failed to Open EPG (UK, Australia)
5. The names of files when a timer recording (it was the previous event)
6. Cable, a record of different QAM.

FAC.OPENBOX.S9 HD PVR.v1.08.75