Wiccard 1.19 GP3-Gemini
Wiccard 1.19 OpenDroid
Wicardd 1.19
-
- WiCardd
- titau_246
- Thread is marked as Resolved.
-
-
I'm running this cam for few days now, reading my nagra card with dvbapi.
All running perfect, despite webinfo is a little poor, when compared to oscam webinfo.Anyway I want to ask how do I configure my card reader to allow/block emms, so I can use it to update my card?
Using this config
Code[dvb] active = 1 type = DVBAPI3 #auto filter = meucard,dvb,dvb1,dvb2,bloker emm_filter_mode = 1 sdt = 1 auto_update = 1 ecm_info = 1 debug = 1
Code
Display More[reader] active = 1 name=CardNos type = tuxbox device = /dev/sci0 debug = 1 boxkey = rsamod = auto_update = 1 emm_cache = 1 timeout = 1500 filter = meucard
Is this enough, how do I block emmG, or allow only emmU?
p.s. how do you start/stop/restart wicardd using webinfo?
Thx
-
thank you
yes so runs also an HD+ card HD02 -
How can I configure this for PowerVu on OpenPli running on Solo2 ?
-
OpenSpa ???
-
I'm running this cam for few days now, reading my nagra card with dvbapi.
All running perfect, despite webinfo is a little poor, when compared to oscam webinfo.Anyway I want to ask how do I configure my card reader to allow/block emms, so I can use it to update my card?
Using this config
Code[dvb] active = 1 type = DVBAPI3 #auto filter = meucard,dvb,dvb1,dvb2,bloker [COLOR='Orange']emm_filter_mode = 1[/COLOR] sdt = 1 [COLOR='Red']auto_update = 1[/COLOR] ecm_info = 1 debug = 1
Code
Display More[reader] active = 1 name=CardNos type = tuxbox device = /dev/sci0 debug = 1 boxkey = rsamod = [COLOR='Red'] auto_update = 1[/COLOR] emm_cache = 1 timeout = 1500 filter = meucard
Is this enough, how do I block emmG, or allow only emmU?
p.s. how do you start/stop/restart wicardd using webinfo?
Thx
hi, try what u want config !
write_delay = 0
force_crypted_cw = 1
ocp = 1
wait_active = 1
force_caid = 0
force_provider = 0
force_ua = 0000
force_ua = 0000
filter = name
active = 0
ecm_queue_size = 8
boxid =
cwekey =
boxkey
rsamod =
rsaexp =
auto_update = 1
emm_cache = 1
ecm_ttl = 5000
block_subs_emm = 0 -
Wiccard 1.19 HDMU
Wiccard 1.19 Pkt
Wiccard 1.19 Open Vix
Wiccard 1.19 VTI
Wiccard 1.19 ItalySat
Wiccard 1.19 PB enigma2
Wiccard 1.19 OpenSpaapplies to wetek ?
-
applies to wetek ?
Hello, in fact you can put the emu in all images; you should look with ftp "where" the conf & start script must be..example
**the bin file is ever in usr/bin & chmod755 (attribute)
in PLI image the conf is in etc/tuxbox/config/wicardd.conf
the start/stop script is in etc/init.d/softcam.wicarddin ATV image usr/keys/wicardd.conf & etc/wicardd.emu (script) <<< the name is different
-
thanks very much
-
to connect wicardd to oscam
reshare
[server]
active = 1
type = newcamd525
provider = 1802:000000;0100:005221
port = 25500
key = 0102030405060708091011121314
debug = 3[server]
active = 1
type = cs357x
provider = 1802:000000;0100:005221
port = 27500
debug = 3[server]
active = 1
type = cccam
provider = 1802:000000;0100:005221
port = 23500
debug = 3[account]
login = user
password = user[account]
login = user1
password = user1[account]
login = user2
password = user2to reshare wicardd to oscam as im doing
tv cabo and Meo
you can use other caids to suit your own setupcs357x
is the quickestin oscam server
which ever one you choose above add to the oscam.server
wicardd box ip or your dns.server no-ip
device = wicardd box ip,25500
key = 0102030405060708091011121314
user = user
password = user
label = user
protocol = newcamd
group = 2[reader]
device = wicardd box ip,23500
user = user1
password = user1
label = user1
protocol = cccam
group = 2
cccversion = 2.1.1[reader]
device = wicardd box ip,27500
user = user2
password = user2
label = user2
protocol = camd35
group = 2 -
Thank you
recharer tntsat how my card has wicardd wicardd I want to recharer clines just my card? -
Working powervu only on Amos 4W. Not working on 0.8W, 9E, 4.8E etc.
-
Update
Wicardd 1.19
What's new:
Server termination of the current session of the customer after the change of the* DVBAPI update API VDR, support of old and new versions plug-dvbapi-vdr plugin
* CS378x restored work protocol
+ LOG safelog = 1 does not output private data in the log
* Reader tuxbox fix initialization Conax card c PTS
* Reader CCCAM fix memory leak
+ Server all outgoing packets POLLOUT
* Reader Irdeto crash on ecm_len> 0x100
* Reader Conax sending pincode when unsuccessful decoding
- Core module batch abolished
+ Server added Command Interface Line
+ Reader Conax option force_caid
+ Reader option date_base base date *** / Irdeto
* DRE2 new support group EMM
+ DVBAPI camd_socket_file option to use the specified socket, the default /tmp/camd.socket
* Reader AmLogic fixes for a Spark 2
* Cache change in the algorithm caching (smart hash)
+ Core native version for the Windows
+ Core eabihf support arm (solo4k)
+ EMU PowerVu implementation of the algorithm PowerVuDownload what you need
Put it in: var/tmp
Put this in Telnet: opkg install -force-overwrite /tmp/*.ipk
restart enigma2
enjoyThanks for Raed
[/COLOR] -
what about wicardd 1.19 for spark 7111
-
hi zozo i have bh 3.02 image on amikop sti 7111 with wizcard,oscam....ect only oscam run good with not prob , try it wizcard not working for me
-
what about wicardd 1.19 for spark 7111
Download attachment from the first post. Use the version wicardd-sh4 for spark 7111 & 7162.
-
If someone can please post config file for wicardd 1.19 for OpenAtv 5.1 image and location where to put it I would be grateful!!!
-
The default config directory on openatv image is usr/keys.
You can change the wicardd.emu script in /etc to look for the configs in any folder you want.
For example /etc/tuxbox/config: -
thnx ......................
-
what about wicardd 1.19 for solo4k openblackhole ?
Other Not Listed Softcam Support Forum
Configs, discussion, downloads and guides for Other Not Listed Softcams - CSP, DreamOS, GBox, NEWCamd, MultiCS, OSCam Smod, OSCam Ymod, SUpcam & Wicardd.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!