hi all,bit rusty with the sat scene,been ok for years but now black screen on front,normall lights inside,tried connecting via service port and ethernet,dream up detects then says turn on box,but nothing happens then,hoping im doing something wrong and not looking for a new one,any help appreciated
btw looks a great sat site this,some others have lost the sat side of it,this has so much on it
800se ,power inside ,black on front
- porter1
- Thread is marked as Resolved.
-
-
Have you tried another PSU ?
-
no i havent got one here
- - - Updated - - -
thanks a lot,i8 found one of my old 800 in the shed ,worked,result,cheers,using new enigma 2,any better ones out there with auto update epg by any chance,appreciated
- - - Updated - - -
funny enough i got a bfront boot screen from the other psu ,tried again and its dead,no green light on the psu,but the origianl one has a green power light on it buit only the green and red light are on inside,,,btw the dream had a lot of dust in it
-
clear the dust. flash a latest image and bootloader for your box here is a link to the bootloader http://linuxsat-support.com/attachment.php?attachmentid=19156&d=1382729012 and choose an image from here http://linuxsat-support.com/forumdisplay.php?f=386. id recommend openpli
-
trying dream up but wont find com port,doing something wrong,,,cant get a ip on screen by holding the front power button
-
make sure ethernet cable is plugged in properly. before you turn your box on behind the box is a mini flash button. hold that when powering up box and an ip address will appear
-
cheers says 2nd failed
-
an ip address should still appear
-
just says 2nd failed
-
as the box is a clone try using sunray flash up and it should work http://linuxsat-support.com/attachment.php?attachmentid=6186&d=1329940725
-
been on calculating checksum a long while
- - - Updated - - -
been on calculating checksum for a while
- - - Updated - - -
locked on checksum,tried a few times now
- - - Updated - - -
tried new enigma what i had on it before,now says invalid image or old version,box unusable now after flashing
-
afther flashing image you have to put bootloader try ncf programe to revive your box?
-
so flash image then bootloader,ill look at that programme to revive the box tonight,thanks for ye help
what and where is ncf,,thanks -
try to google ncf or on dreambox tools in forum
-
after trying sunray fsh i get this,image and bootloader
18:43:52 box type: DM800SE
18:44:13 Calculating checksum...
18:44:15 Uploading file to box...
18:56:00 box is flashing from its memory...
18:56:02 Flashing failed (!!! 010 INVALID IMAGE (OR OLD VERSION)), box will be unusable now!!
18:56:13 Calculating checksum...
18:56:14 Uploading file to box...
18:56:16 box is flashing from its memory...
18:56:16 Flashing failed (!!! 010 IMAGE FOR WRONG ARCHITECTURE), box will be unusable now!! -
Again m8... Have you tried another PSU ?
-
ive got black hole on it,connevted to tv,all options ,set up etc avilable,just cant connect via laptop to send catseyes etc,presume its the bootloader because the one on this post fails every time i send it after i done the image,i only need to connect to finish set up,hope theres an answer,thanks everyone for helping,appreciated,,,,,,im using another power adater/cable now
-
just use the autobouquet plugin it will find and put the channels in favourites for you http://linuxsat-support.com/attachment.php?attachmentid=42742&d=1446475231
Use a usb and put the file in there and then connect it to dm800se
-
why wont it connect normally,any reason,how would i transfer stuff into cam
- - - Updated - - -
sorted i downloaded the bootlaoder again strange enough,but this time it flashed,thanks everyone for the help,great sat forum
-
http://linuxsat-support.com/showthread.php?t=30475
okay porter1 dowload this plugin
dowload dcc i think you have it open dcc,click ftp ,open tmp then on the left find the pluging and pass it to left then ckicl on rigth mouse and change attribute to 755
then close ,
press gren on remote, yellow , install manual ipk then reboot enigma, green boton find linuxsat support
then afther install best is cccam 213 the firts make sur you install cccam for black hole.
then open dcc connected click ftp ,var,ect find cccam cfg edit and paste your line close
then blue boton active cccam
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!