OSCam/CCcam Auto Install Scripts Version1 20.01.2012 By Silverfox0786

silverfox0786 · Feb 2nd 2012

not sure why you guys getting this

for the people getting issues installing script please try this

Code

sudo -i
enter password the...
cd /tmp
./serverinstall.sh

see if that works

as for the cams not starting mine seem to work fine and here are logs from my server to show you

also her is a TOP report to show both running

Code

login as: card
card@192.168.1.10's password:
Linux fitPC2 2.6.35-22-generic-pae #33-Ubuntu SMP Sun Sep 19 22:14:14 UTC 2010 i                                                                                                                     686 GNU/Linux
Ubuntu 10.10




Welcome to Ubuntu!
 * Documentation:  https://help.ubuntu.com/
New release 'natty' available.
Run 'do-release-upgrade' to upgrade to it.




Last login: Sat Jan 28 18:22:00 2012 from 192.168.1.3
card@fitPC2:~$ top
top - 01:29:54 up 4 days,  7:06,  1 user,  load average: 0.22, 0.12, 0.04
Tasks:  91 total,   1 running,  90 sleeping,   0 stopped,   0 zombie
Cpu(s):  0.5%us,  0.2%sy,  0.0%ni, 92.4%id,  6.9%wa,  0.0%hi,  0.0%si,  0.0%st
Mem:   1015848k total,   323088k used,   692760k free,    44972k buffers
Swap:  2437116k total,        0k used,  2437116k free,   205900k cached




  PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND
  685 root      20   0 33728 1640  812 S    0  0.2  23:27.12 pcscd
24831 root      20   0 49700 3832 1632 S    0  0.4   2:03.93 [COLOR='#FF0000']oscam.x86[/COLOR]
28981 root      20   0 36900 1856 1548 S    0  0.2   0:03.22 [COLOR='#FF0000']CCcam.x86[/COLOR]
29925 card      20   0  8572 1468  884 S    0  0.1   0:00.01 sshd
29954 card      20   0  2592 1084  840 R    0  0.1   0:00.15 top
    1 root      20   0  2728 1568 1180 S    0  0.2   0:00.76 init
    2 root      20   0     0    0    0 S    0  0.0   0:00.05 kthreadd
    3 root      20   0     0    0    0 S    0  0.0   0:04.46 ksoftirqd/0
    4 root      RT   0     0    0    0 S    0  0.0   0:00.09 migration/0
    5 root      RT   0     0    0    0 S    0  0.0   0:00.00 watchdog/0
    6 root      RT   0     0    0    0 S    0  0.0   0:00.07 migration/1
    7 root      20   0     0    0    0 S    0  0.0   0:05.29 ksoftirqd/1
    8 root      RT   0     0    0    0 S    0  0.0   0:00.00 watchdog/1
    9 root      20   0     0    0    0 S    0  0.0   0:09.22 events/0
   10 root      20   0     0    0    0 S    0  0.0   0:12.54 events/1
   11 root      20   0     0    0    0 S    0  0.0   0:00.00 cpuset
   12 root      20   0     0    0    0 S    0  0.0   0:00.00 khelper
   13 root      20   0     0    0    0 S    0  0.0   0:00.00 netns
   14 root      20   0     0    0    0 S    0  0.0   0:00.00 async/mgr
   15 root      20   0     0    0    0 S    0  0.0   0:00.00 pm
   17 root      20   0     0    0    0 S    0  0.0   0:01.38 sync_supers
   18 root      20   0     0    0    0 S    0  0.0   0:02.20 bdi-default
   19 root      20   0     0    0    0 S    0  0.0   0:00.00 kintegrityd/0
   20 root      20   0     0    0    0 S    0  0.0   0:00.00 kintegrityd/1
   21 root      20   0     0    0    0 S    0  0.0   0:02.57 kblockd/0
   22 root      20   0     0    0    0 S    0  0.0   0:00.23 kblockd/1
   23 root      20   0     0    0    0 S    0  0.0   0:00.00 kacpid
   24 root      20   0     0    0    0 S    0  0.0   0:00.00 kacpi_notify
   25 root      20   0     0    0    0 S    0  0.0   0:00.00 kacpi_hotplug
   26 root      20   0     0    0    0 S    0  0.0   0:00.00 ata_aux
   27 root      20   0     0    0    0 S    0  0.0   0:00.00 ata_sff/0
   28 root      20   0     0    0    0 S    0  0.0   0:00.00 ata_sff/1
   29 root      20   0     0    0    0 S    0  0.0   0:00.00 khubd
   30 root      20   0     0    0    0 S    0  0.0   0:00.00 kseriod
   31 root      20   0     0    0    0 S    0  0.0   0:00.00 kmmcd
   32 root      20   0     0    0    0 S    0  0.0   0:00.22 khungtaskd
   33 root      20   0     0    0    0 S    0  0.0   0:00.00 kswapd0
   34 root      25   5     0    0    0 S    0  0.0   0:00.00 ksmd
   35 root      20   0     0    0    0 S    0  0.0   0:00.00 aio/0
   36 root      20   0     0    0    0 S    0  0.0   0:00.00 aio/1
   37 root      20   0     0    0    0 S    0  0.0   0:00.00 ecryptfs-kthrea
   38 root      20   0     0    0    0 S    0  0.0   0:00.00 crypto/0
   39 root      20   0     0    0    0 S    0  0.0   0:00.00 crypto/1
   49 root      20   0     0    0    0 S    0  0.0   0:00.00 kstriped
   50 root      20   0     0    0    0 S    0  0.0   0:00.00 kmpathd/0

Display More

dvdman · Feb 2nd 2012

thats fine mate yours are working but that install script that you upload for us to test dont work you ask for bug/faults so here thay are
cccam dont start
when cccam.check finds cccam not running it then starts cccam
then cccam crash after 16min please look at my logs on 1st page

thanks dvdman

also 24831 root 20 0 49700 3832 1632 S 0 0.4 2:03.93 oscam.x86
28981 root 20 0 36900 1856 1548 S 0 0.2 0:03.22 CCcam.x86

oscam been running for 2h 3min
ccam been running 3min
??????????????????????

silverfox0786 · Feb 3rd 2012

i think i found the cccam issue

i have made changes to the start paramiters of CCcam so hopefully should now start

silverfox0786 · Feb 3rd 2012

Quote from dvdman

thats fine mate yours are working but that install script that you upload for us to test dont work you ask for bug/faults so here thay are
cccam dont start
when cccam.check finds cccam not running it then starts cccam
then cccam crash after 16min please look at my logs on 1st page

thanks dvdman

also 24831 root 20 0 49700 3832 1632 S 0 0.4 2:03.93 oscam.x86
28981 root 20 0 36900 1856 1548 S 0 0.2 0:03.22 CCcam.x86

oscam been running for 2h 3min
ccam been running 3min
??????????????????????

Display More

yr right i see the time lapse but then it says my oscam been runnig 2 hours yet my uptime is 4 days without issues so i would say ignore that one as it dont seem to be accurate

**dawser** · Feb 4th 2012

:feel_good:
i will run the install on an Ubuntu 10.10 and 11.10 when a home. info follows

dvdman · Feb 10th 2012

Quote from dawser

:feel_good:
i will run the install on an Ubuntu 10.10 and 11.10 when a home. info follows

any news did it work ?

**dawser** · Feb 15th 2012

Quote from dvdman

any news did it work ?

works both on 10.10 and 11.10 32 bit. Not on 64 bit.

dvdman · Feb 16th 2012

Quote from dawser

works both on 10.10 and 11.10 32 bit. Not on 64 bit.

dose cccam/oscam start 1st time now too?

silverfox0786 · Feb 17th 2012

yeah guys can someone report back if cccam is working first time or not now

i have an idea if it dont so need to know so i can make changes if need be

but dont wanna if all is well

after all they do say "if it aint broke... dont fix it"

binusona · Feb 22nd 2012

Quote from silverfox0786

i think i found the cccam issue

i have made changes to the start paramiters of CCcam so hopefully should now start

I successfully installed OSCam/CCcam Auto Install Scripts Version1 20.01.2012 By Silverfox0786
could u pls help me How to I know ccam working or not .pls replay for me

jawa · Feb 23rd 2012

Quote from binusona

I successfully installed OSCam/CCcam Auto Install Scripts Version1 20.01.2012 By Silverfox0786
could u pls help me How to I know ccam working or not .pls replay for me

use cmd # ps -A

cumps-jawa

**contemptx** · Feb 24th 2012

Im currently installing a fresh Ubuntu 10.4 LTS server and ive decided to test out your script.
I have not run the script yet, getting to that in a moment as I'm installing openssh, proftpd etc.. manually first as its easier to carry on the install via my main computer and put the system on the network then continue.

While doing this I have noticed that the following is incorrect:

Command: apt-get install libusb-1.0
Error: Couldn't find package libusb-1.0

I'm unsure, but running: apt-get install libusb-dev
should install the requirements needed.

or I would replace this part to download and compile from source.

wget Download libusb from SourceForge.net
tar xjf libusb-1.0.8.tar.bz2
cd libusb-1.0.8
./configure; make; make install

**contemptx** · Feb 24th 2012

also, just to point out in your instructions:

Place the extracted ubuntu_cccam_package folder and the UbuntuInstall.sh into root/tmp/

I assume this should be updated to: Place the extracted linux_softcam_pack folder and the installserver.sh into root/tmp/

**contemptx** · Feb 24th 2012

I noticed some people are having a couple of issues with the files after they have edited them.

install: apt-get install tofrodos

then run:

fromdos /tmp/serverinstall.sh
fromdos /tmp/linux_softcam_pack/LogCleanUp.sh
fromdos /tmp/linux_softcam_pack/configupdate.sh

**contemptx** · Feb 24th 2012

At first I thought it was my config, however after tampering, it seems cccam is not starting.
I'm going to double check my config against my server that is running & compare crontab aswell.

OScam is running.

I have a totally fresh install and until later next week this box is a spare, so I can do any testing if required ;)

I also noticed that in config.php for cccaminfo, this has 2 config options uncommented which would probably cause issues with it connecting to cccam, however this is only a minor edit ;)

**contemptx** · Feb 24th 2012

OK,

I dont know whats up with the cccam binary provided in your script, but it wont boot for toffie!
I copied over the cccam binary from my other server & bingo! all working ;)

I have attached it to this post.

-

Other Issues:

CRONTAB:
Looking over the crontab section of the install, there are some errors:

echo "making crontabs in /etc/crontab, remember no crontab -e..."
echo "Please Wait..."
sleep 3
echo "55 05 * * * root killall CCcam.x86" >> /etc/crontab
echo "55 05 * * * root pkill oscam.x86" >> /etc/crontab
echo "57 05 * * * root /var/script/configupdate.sh" >> /etc/crontab
echo "58 05 * * * root /var/script/keyupdater.sh" >> /etc/crontab
echo "59 05 * * * root /usr/local/bin/oscam.x86 -b -c /var/etc/config" >> /etc/crontab
echo "59 05 * * * root touch /media/card/camlogs/CCcam/CCcam.log && /usr/local/bin/CCcam.x86 -d >> /media/card/camlogs/CCcam/CCcam.log" >> /etc/crontab
echo "*/6 * * * * root /var/script/OscamCheck.sh" >> /etc/crontab
echo "*/6 * * * * root /var/script/CCcamCheck.sh" >> /etc/crontab
echo "05 06 * * 7 root /var/script/LogCleanUp.sh >> /media/card/camlogs/CleanUp.log" >> /etc/crontab
sleep 2
echo "Installing Server required software..."

Update to:

echo "making crontabs in /etc/crontab, remember no crontab -e..."
echo "Please Wait..."
sleep 3
echo "55 05 * * * root killall CCcam.x86" >> /etc/crontab
echo "55 05 * * * root killall oscam.x86" >> /etc/crontab
echo "57 05 * * * root /var/script/configupdate.sh" >> /etc/crontab
echo "58 05 * * * root /var/script/keyupdater.sh" >> /etc/crontab
echo "59 05 * * * root /usr/local/bin/oscam.x86 -b" >> /etc/crontab
echo "59 05 * * * root /usr/local/bin/CCcam.x86" >> /etc/crontab
echo "*/6 * * * * root /var/script/OscamCheck.sh" >> /etc/crontab
echo "*/6 * * * * root /var/script/CCcamCheck.sh" >> /etc/crontab
echo "05 06 * * 7 root /var/script/LogCleanUp.sh >> /var/cccamlogs/CleanUp.log" >> /etc/crontab
echo "45 04 * * * /etc/init.d/ddclient --force" >> /etc/crontab
sleep 2
echo "Installing Server required software..."

I have added: 45 04 * * * /etc/init.d/ddclient --force
This for to update dns clients such as: dyndns (when installed).... more on that later ;)

To manually edit, run: sudo crontab -e

then paste:

55 05 * * * root killall CCcam.x86 >> /etc/crontab
55 05 * * * root killall oscam.x86 >> /etc/crontab
57 05 * * * root /var/script/configupdate.sh >> /etc/crontab
58 05 * * * root /var/script/keyupdater.sh >> /etc/crontab
59 05 * * * root /usr/local/bin/oscam.x86 -b >> /etc/crontab
59 05 * * * root /usr/local/bin/CCcam.x86 >> /etc/crontab
*/6 * * * * root /var/script/OscamCheck.sh >> /etc/crontab
*/6 * * * * root /var/script/CCcamCheck.sh >> /etc/crontab
05 06 * * 7 root /var/script/LogCleanUp.sh >> /var/cccamlogs/CleanUp.log >> /etc/crontab
45 04 * * * /etc/init.d/ddclient --force

-

RC.LOCAL

Has a couple of /folder paths/ change to:

sleep 5

/usr/local/bin/oscam.x86 -b -c /var/etc/config &

sleep 1

/var/camlogs/CCcam/CCcam.log &

sleep 5

/usr/local/bin/CCcam.x86 -d >> /var/camlogs/CCcam/CCcam.log &

exit 0

-

CCcamInfo:

I noticed in config.php that there are multiple arrays open:

//$CCCamWebInfo[] = array("localhost","12345","user","pass"); // for CCcam webinterface with user and pass
$CCCamWebInfo[] = array("192.168.1.10","16001"); // for CCcam webinterface with different port than default and without user and pass
$CCCamWebInfo[] = array("localhost"); // for CCcam webinterface with all defaults

Change to:

//$CCCamWebInfo[] = array("localhost","12345","user","pass"); // for CCcam webinterface with user and pass
$CCCamWebInfo[] = array("localhost","16001");

**contemptx** · Feb 24th 2012

For those wanting to keep there dns updated install: sudo apt-get install ddclient
and follow the prompts ;)

**Madhatter** · Feb 25th 2012

I have copied and pasted the files into the TMP folder (not VAR/TMP)

but everytime I use terminal in Debian get the following error

madhatter@debian:~$ sudo -i
[sudo] password for madhatter:
root@debian:~# chmod 755 /tmp/serverinstall.sh
root@debian:~# /tmp/serverinstall.sh
-bash: /tmp/serverinstall.sh: /bin/sh^M: bad interpreter: No such file or directory
root@debian:~# ^C
root@debian:~#

Any one can help Pleaseeeeeeeeeee

**contemptx** · Feb 26th 2012

madhatter,

install tofromdos: apt-get install tofrodos

then run:

fromdos /tmp/serverinstall.sh
fromdos /tmp/linux_softcam_pack/LogCleanUp.sh
fromdos /tmp/linux_softcam_pack/configupdate.sh

**Madhatter** · Feb 26th 2012

Thanks mate but am sorted, it was a problem with the script and now all set up.

Though cannot get Omnikey to be recognised but I think that is due to not having the drivers installed, I thought there were int he script but you learn something new everyday.

So gonna have a go at this thread.

http://linuxsat-support.com/li…key-readers-linux-pc.html

OSCam/CCcam Auto Install Scripts Version1 20.01.2012 By Silverfox0786

Participate now!

Share

Tags