dreambox question

Making Your Dreambox Wireless

Via Router

This is by far the easiest method of connecting it to the internet.

First of all, we’ll assume that you can already connect to your box via FTP via a crossover cable. If you can’t, you might want to read up on that before attempting this.

Now, what we’ll need is…

Ethernet cable (crossover or patch)
Router
Modem

We’ll also assume that you have a router (wireless or not) and that your modem is connected to the ‘Internet’ or ‘WAN’ port.

If you have a free port on your wireless router, you can connect your dreambox to this. Use the ethernet cable (crossover or patch, most modern routers will accept either) connect one end to your dreambox and one end to a free port on your router. You don’t need to change any settings on your router or PC.

Over to the dreambox. Navigate to the networking page on your dreambox.

Setup -> Expert Setup -> Communication Setup

There is a section in this page called ‘Default Gateway’. You need to put the ip address of your router in there. It’s usually 192.168.0.1, 192.168.1.1 or 192.168.2.1 (depending on the manufacturer). You can find out my opening your browser and typing one of the ip addresses in to the address bar. If you are presented with the router config page or a box asking for a username and password, this is the ip address for your router.

If you have enabled DHCP support on your router, all you have to do it tick the DHCP box in this page, save settings, reboot box and that’s that. The router will automatically assign the dreambox an ip address and it’s now connected to the internet.

If you don’t have DHCP enabled, you will need to assign a static ip address to the dreambox manually. This needs to be in the same subnet as your router ip address. The subnet is the first 3 ranges of the ip address, i.e. 192.168.1.*. Make the last range anything between 2-254 as long as another PC or laptop on your network doesn’t have that ip address. Each device must have it’s own ip address. Save settings and reboot box and you should be connected.

Via Wireless

There are devices which can make any ethernet equipped device into a wireless device. They are called a ‘Wireless Ethernet Bridge’ or a ‘Wireless Gaming Adapter’. The settings on the dreambox are exactly the same as if you’re using a router on it’s own. The gateway to the internet is still via your wireless router so the router ip address needs to go into the ‘Default Gateway’ section. You’re best getting these devices on Ebay or at a website like broadbandstuff.co.uk. You will need to follow the instructions that come with the device to connect it to your own network.

Via Modem

If you have a spare modem lying about, clone or original, you can use this to connect directly to the internet without any wireless devices or routers.

First of all, you will need to connect a PC or laptop to the modem to find out it’s ip address. This ip address goes into the ‘Default Gateway’ section of the network settings page on your dreambox. Also enable DHCP on your dreambox. This is all that’s needed.

So, now you have no excuse to get your dreambox connected to the internet. There are loads of great plugins out there that could enhance your dreambox experience. Some examples include an RSS Newsreader (for viewing RSS feeds from your favourite website or even the forum if the RSS option is enabled, DreamNetCast Internet Radio (listen to your favourite internet radio station) or Dream Weather X (gives you access to weather information).

I hope this has helped you!!