Wetek Openelec - Tvheadend - Oscam - Sly UK 28.2 - HELP PLEASE!!

**Bean** · Feb 24th 2016

Hi Lads,

I bought a Wetek Openelec (Orange Light) box, not the play version. The problem I am having is getting my cline to work on the box.

I have read countless threads on different forums and tried dozens of configs but no good. I have Tvheadend working fine and can watch FTA channels no bother and also have oscam installed and up and running.

Can anybody please give me working oscam config files so I can enter my cline and get channels clearing. This is driving me nuts!!!!!

Thanks in advance lads.

Bean

**TH3-J0K3R** · Feb 24th 2016

if your using Cccam make sure you tick want emu near the user n pass area of oscam webif

there is also a backup by myself posted that is ready fot you to just edit the oscam webif with your dyndns port user n password des key ect ect
its in backups section of wetek :)

**Bean** · Feb 25th 2016

Any chance you could give me the link?

- - - Updated - - -

This is the one I downloaded - http://linuxsat-support.com/showthread.php?t=101362

Went into the oscam config files and copied everything over and restarted oscam.

Now I have 2 root servers and anonymous user.

Any ideas?

Got oscam going, was restarting using the webif which does not work. had to reboot the box itself.

Oscam running now and client openelec dvdapi but still no channels clearing.

- - - Updated - - -

Got oscam going, was restarting using the webif which does not work. had to reboot the box itself.

Oscam running now and client openelec dvdapi but still no channels clearing.

- - - Updated - - -

This is what I am getting now -

(dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

**TH3-J0K3R** · Feb 25th 2016

sounds as if one of the config files has corrupted or restore , check the dvb-api user name is set right
what pVr have you activated ? tvheadend ? you could also go into its web if and ensure the tuners are correctly set
the channel list on this will be needed to be updated to i would imagine , theres guids to do this posted if TVheadend use E2 2 TVH if VDR use the online E2 to .conf converter

and yeah you need to reboot a few times 1 after u config oscam and 1 after you set your PVR tbh ive found after any update or change you make you need to reboot via full power out and back it to help changes stick :)

**Bean** · Feb 25th 2016

Here are my configs -

oscam.conf

[global]
logfile = /storage/.kodi/userdata/addon_data/service.softcam.oscam/log/oscam.log
nice = -1
usrfile = /storage/.kodi/userdata/addon_data/service.softcam.oscam/log/oscamuser.log
cwlogdir = /storage/.kodi/userdata/addon_data/service.softcam.oscam/log/cw

[cache]

[newcamd]
port = 10001@0963:000000
serverip = 127.0.0.1
key = 0102030405060708091011121314
keepalive = 1
mgclient = 1

[dvbapi]
au = 1
enabled = 1
pmt_mode = 4
user = Openelec dvdapi
boxtype = pc

[monitor]
port = 988
aulow = 120
monlevel = 1
hideclient_to = 15

[webif]
httpport = 8888
httpuser = oscam
httppwd = oscam
httpallowed = 0.0.0.0-255.255.255.255
aulow = 120
hideclient_to = 15

oscam.server

[reader]
label = Cccamtest
description = cccam
enable = 0
protocol = cccam
device = xxxxxxxxx.dyndns.org,xxxxx
user = cline username
password = cline password
inactivitytimeout = 30
caid = 0963
ident = 0963:000000
group = 3
cccversion = 2.0.11
cccwantemu = 1
ccckeepalive = 1

[reader]
label = newcamdtest
enable = 0
protocol = newcamd
device = xxxxxxxxx.dyndns.org,xxxxx
user = cline username
password = cline password
disableserverfilter = 1
connectoninit = 1
caid = 0963
ident = 0963:000000
group = 2
ccchop = 3

[reader]
label = slyuk
enable = 0
protocol = pcsc
device = 0
caid = 0963
detect = cd
group = 1
emmcache = 1,3,2,0
blockemm-unknown = 1
blockemm-g = 1
saveemm-u = 1
saveemm-s = 1

oscam.user

[account]
user = Openelec dvdapi
pwd = 123456
caid = 0963
au = 1
group = 1,2,3
ident = 0963:000000

[account]
user = Openelec dvdapi(Tvheadend)
pwd = 123456
caid = 0963
au = 1
group = 1,2,3
ident = 0963:000000

21ca9.jpg

Should there be an IP address for Openelec dvdapi in oscam as per image attached?

This is my tvheadend ca config -

5c46f04931cf4ef34fd.jpg

This is currently what live log is outputting -

2016/02/25 19:40:45 0 >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r0 (armv7a-openelec-linux-gnueabi)
2016/02/25 19:40:48 1994A38 c (dvbapi) Demuxer 0 added new ecmpid 0 CAID: 0960 ECM_PID: 0500 PROVID: 000000
2016/02/25 19:40:48 1994A38 c (dvbapi) Demuxer 0 added new ecmpid 1 CAID: 0961 ECM_PID: 0500 PROVID: 000000
2016/02/25 19:40:48 1994A38 c (dvbapi) Demuxer 0 added new ecmpid 2 CAID: 0963 ECM_PID: 0500 PROVID: 000000
2016/02/25 19:40:48 1994A38 c (dvbapi) Demuxer 0 found 3 ECMpids and 0 STREAMpids in PMT
2016/02/25 19:40:48 1994A38 c (dvbapi) Demuxer 0 receiver wants to demux srvid 0585 on adapter 0001 camask 0002 index 0000 pmtpid 0000
2016/02/25 19:40:48 1994A38 c (dvbapi) Demuxer 0 new program number: 0585 (0960:0585 unknown) [pmt_list_management 3]
2016/02/25 19:40:48 1994A38 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2016/02/25 19:40:48 1994A38 c (dvbapi) Demuxer 0 continue decoding of SRVID 0585
2016/02/25 19:40:48 1994A38 c (dvbapi) Demuxer 0 skipped stream CAID: 0960 ECM_PID: 0500 PROVID: 000000 (Same as ECMPID 0)
2016/02/25 19:40:48 1994A38 c (dvbapi) Demuxer 0 skipped stream CAID: 0961 ECM_PID: 0500 PROVID: 000000 (Same as ECMPID 1)
2016/02/25 19:40:48 1994A38 c (dvbapi) Demuxer 0 skipped stream CAID: 0963 ECM_PID: 0500 PROVID: 000000 (Same as ECMPID 2)
2016/02/25 19:40:48 1994A38 c (dvbapi) Demuxer 0 found 3 ECMpids and 0 STREAMpids in PMT
2016/02/25 19:40:48 1994A38 c (dvbapi) Demuxer 0 receiver wants to demux srvid 0585 on adapter 0001 camask 0002 index 0000 pmtpid 0000
2016/02/25 19:40:48 1994A38 c (dvbapi) Demuxer 0 new program number: 0585 (0960:0585 unknown) [pmt_list_management 3]
2016/02/25 19:40:51 1994A38 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2016/02/25 19:40:57 1994A38 c (-) -- Skipped 1 duplicated log lines --
2016/02/25 19:41:59 1994A38 c (-) -- Skipped 21 duplicated log lines --

- - - Updated - - -

Anybody willing to help???

- - - Updated - - -

As far as I can see the problem is with the user not connected -

ef6c3ad50f9.jpg

**TH3-J0K3R** · Mar 15th 2016

Quote from Bean

Here are my configs -

As far as I can see the problem is with the user not connected -

sorry this post has been missed by myself when i was ill

right if you go here on wetek via winscp

"\storage\.kodi\userdata\addon_data\service.multimedia.tvheadend\caclient"

open the file and put inte following ;)

Code

{
	"username": "Openelec dvdapi(Tvheadend)", 
	"password": "123456",
	"hostname": "127.0.0.1",
	"port": port you want to use,
	"deskey": "01:02:03:04:05:06:07:08:09:10:11:12:13:14",
	"emm": true,
	"emmex": true,
	"class": "caclient_cwc",
	"index": 1,
	"enabled": true,
	"name": "dvdapi(Tvheadend)"
}

Display More

now the port above and user / pass should match oscam user and pass from wetek user & pass not lines
the port you should set in following page on wetek oscam page CONFIG THEN NEWCAMD TAB

PUT FOLLOWING INFO

Code

port : yourport@0963:000000
server ip : 127.0.0.1
key : 0102030405060708091011121314 or what eva deskeyyour using 
Keepalive:	tick 
Mgclient:	tick

then reboot the oscam
if you still have issues check your deskey is put in right in tv headend ie in oscam you can 01020304050607 but tvhead you must 01:02:03:04:05:06:07
and so on yeah , hope this helps and sorry i missed your reply :(
in future if yah quote me i will get a pm letting me know :)

Wetek Openelec - Tvheadend - Oscam - Sly UK 28.2 - HELP PLEASE!!

master G Apr 9th 2019

master G Apr 9th 2019

Participate now!

Share

Tags