MAG250 Remote+ v1.29
This application supports all functions of the original remote control for MAG 250 and Aura HD STB.
New feature: TV remote control. 2 in 1 application.
Features:
IrDA and Wi-Fi
TV remote control (via IrDA)
Widget for Home and Lock screens
Auto discovery
Support multiple STBs
Sensitivity
Soft Keyboard
Today MAG250 Remote doesn't require IrDA any more, it can use Wi-Fi to communicate with STB MAG 250 and Aura HD.
Control your STB MAG 250 from any device without IrDA.
Just enable Wi-Fi Сonnectivity if your device doesn't have IrDA and configure Remote Control on STB MAG 250.
Widget provides basic functions of IR Remote.
The application support remote control for TV: "SAMSUNG", "LG", "SONY", "PANASONIC", "TOSHIBA", "PHILIPS", "JVC", "SHARP", "HITACHI", "FUJITSU", "TCL".
Limits:
Wi-Fi Connectivity feature is compatible with a firmware version 0.2.18-r5 and higher
What's in this version :
Rebranding
Name has been changed from AIR Remote MAG250 to MAG250 Remote
Android 2.3+
---------------------------------------
Userguide: AIR Remote MAG 250
This application uses IrDA by default. If your smartphone doesn’t contain IrDA, you can use Wi-Fi Connectivity feature. This feature is compatible with a firmware version 0.2.18-r5 and higher for STB MAG 250.
In order to get System Settings on MAG 250, remove and plug-in power cable on MAG 250. Then click SETUP button on the original remote control of MAG250 many many times, until the System Settings will not appear.
You have to enable Remote control in System Settings of MAG 250. Set Name and Password for this feature.
IP Address of STB you can find in Network Info:
Firmware Version you can find in Device Info:
Ok, go ahead and configure AIR Remote MAG 250.
Air Remote MAG250 supports autodiscovery, it means that the application finds compatible STBs itself, you just need to select you STB from the list and set Password.
P.S. If the firmware of your MAG 250 is lower than 0.2.18-r5, contact your IPTV service provider for advice to update the firmware.
