Wally West for Barry Allen- Latest versions

**mutz nutz** · Jan 24th 2012

Wally West 6.1 für Barry Allen 6.1

Quote

Hi !

Wie versprochen geht es hier mit Wally West weiter.

ABER nachdem WW 6.1 für BA 6.1 ist kann man die beiden noch NICHT zusammen verwenden weil das BA 6.1 noch NICHT public ist.

Der kit hier ist also erstmals NUR dafür da um die WW Funkionalität zum Partitionierne zu testen, NICHT um ihm mit BA 6.0-* zusammen zu verwenden.

Es wird also ausser Ärger NICHTS bringen wenn Ihr nachdem Ihr WW gestetet/benutzt habt ein BA 6.0.9 installiert (na ja ausser im layout 1 wo kein FAT und keine Imagepartitionen existieren, weil das macht BA sowieso selbst auch).

Ich möchte einfach mal wissen ob der WW kit sauber in allen Varianten (Layout 1,2,3 - also ohne FAT, mit FAT und einer ext3 Partition für /media/ba und alle Images sowie mit FAT, Partition für /media/ba und bis zu 8 Imagepartitionen /media/ba/1...8 auf allen boxen sauber funktioniert).

WW 6.1 unterstüzt nur mehr Devices ab 512MB und alles bis zu 32GB wird als device akzeptiert.

Bitte seit beim layout 3 auch nicht zu streng was die partitionsgröße angeht, durch den Filesystemoverhead und die fixen Blöckgrößen wird die letzte Image Partition oft ein bisschen zu klein oder zu gross sein. Nur wenn das extrem ist (also mehr als +/- 20%) oder eine Partition fehlt das daher als Fehler reporten.

Bitte auch beachten das WW NUR in Images finltioniert wo das fdisk in der busybox ist, AAF und OpenPLi wo es nur sfdisk gibt sind für das Partitionieren mit WW daher NICHT geeignet und ausser eine Fehlermeldung wird WW sich daher auch nicht benutzen lassen.

Und bitte auch testen ob es mit mehreren Devices funktioniert das gewünschte auszuwählen und vor allem auch ob es mit CF Karten noch auf der 7025 geht.

Und auch nicht nur das formatieren testen, sondern auch das Checken von Imagepartitionen und das Formatieren, sowie Backup und Restore des ganzen BA Mediums von /media/ba auf die Harddisk als ba.tar im /media/hdd/backup (das backup ist eh schnell wenn es noch leer ist)

Na ja und Crashen sollte es auch nicht :-)

Viel Spass beim WW Testen und je schneller Ihr damit durch seit, umso schneller wird es auch das BA 6.1 geben um das Ergebnis der Partitioniererei von WW auch benutzen zu können.

Und wie schon gesagt kommt mir nicht mit Fehlern einer anschließenden BA installation, das kann nicht gehen und testen wir auch noch nicht.

LG
gutemine

Display More

Quote

Hi!

As promised, just come along with Wally West.

Can BUT after WW is 6.1 to 6.1 for BA to use the two together because the BA has NOT yet 6.1 is NOT public.

The first kit so here's just there to test the WW SMDs to Partitionierne, NOT to use it with BA to 6.0 * together.

So it will bring trouble NOTHING except if your after your WW gestetet have used / installed 6.0.9 a BA (well except in a layout where there are no FAT partitions and no image, because the BA itself also makes it anyway).

I just want to know even whether the WW kit clean in all versions (1,2,3 layout - without FAT, FAT and ext3 partition for / media / ba and all images and works with FAT, partition for / media / ba and Up to 8 partitions Image / media/ba/1...8 clean on all boxes to work).

6.1 Only WW supports more devices from 512MB up to 32GB, and everything is accepted as a device.

Please layout for the three and not too strict in terms of the partition size by the file system overhead and the fixed block sizes, the last image partition is often a bit too small or too large to be. Only if this is extreme (ie more than + / - 20%) or a partition therefore lacks the reports as an error.

Please also note that ONLY WW finltioniert in images where the fdisk in busybox is OpenPLi AAF and where there are only sfdisk for partitioning are therefore NOT suitable with WW and WW except an error message is, therefore, can not even use.

And please also test whether it works with multiple devices and select the desired especially if it goes with CF cards are still on the 7025th

And also try not only to format, but the check in of image partitions and formatting, as well as backup and restore of the entire BA medium / media / ba on the hard disk as ba.tar in / media / hdd / backup (the backup is always quickly if it is still empty)

Well it should, and not crashing :-)

Have fun testing WW and the faster your order by Date, the faster it will also give BA 6.1 to the result of the Partitioniererei WW can also use.

And as I said do not come here with a subsequent BA installation errors that can not go and test it, we still do not.

LG
gutemine

Display More

**master G** · Jan 25th 2012

wallywest_6.1.1

Code

Apparently this is again a monologue after all have called then :-)




     And if it does then your after extensive testing again I'm not the same fault again ...




     But anyway, is now one of the first page of Wally West 6.1.1 kit where a few bugs now fixed that I found myself even more.




     Please only use this kit for testing.

Display More

**master G** · Jan 28th 2012

Wally West 6.1.4

**master G** · Feb 11th 2012

Wally West 6.2 für Barry Allen 6.2

Quote

As promised, just come along with Wally West. The kit is now in the Annex releaster and can be used together with the 6.2 version of the current BA final. WW 2.6 supports only devices from 512MB up to 32GB and everything is as WW device accepts. WW 6.2 labelt, BA and WW ba partition now and ww, so it ONLY with more BA 6.2. together may use the supported. Please for the layout 3 not too strict in terms of the partition size by the file system overhead and the fixed block sizes, the final image partition is often a bit too small or too large to be. Only if it is extreme (ie more than + / - 20%) or a partition therefore lacks the reports as an error. The current kit has now if it can be installed in an image without busybox fdisk fdisk own it, so that WW should now actually work in images where the image is only sfdisk. Necessary for WW dosfstools lie with a OoZooN image on the feed and if you install with ipkg update has done it before, or they are obtained from there by hand

**master G** · Mar 14th 2012

Wally West 3.6

Code

Wally West 6.3 for Barry Allen 6.3
 Hi!




 As promised, just come along with Wally West.




 The kit is now in the Annex releaster and can be used together with the 6.2 version of the current BA final.




 WW 6.3 only supports more devices from 512MB up to 32GB and everything is as WW device accepts.




 WW 3.6 labelt, BA and WW ba partition now and ww, so it ONLY with more BA 6.3. together may use the supported.




 Please for the layout 3 not too strict in terms of the partition size by the file system overhead and the fixed block sizes, the final image partition is often a bit too small or too large to be. Only if it is extreme (ie more than + / - 20%) or a partition therefore lacks the reports as an error.




 The current kit has now if it can be installed in an image without busybox fdisk fdisk own it, so that WW should now actually work in images where the image is only sfdisk.




 Necessary for WW dosfstools lie with a OoZooN image on the feed and if you install with ipkg update has done it before, or they are obtained from there by hand:




 [URL]http://www.oozoon-dreamboxupdate.de/...-r2_mipsel.ipk[/URL]




 Documentation of how to use wysiwyg WW are here:




 Multiboot with Wally West and Barry Allen




 LG
 gutemine

Display More

**master G** · Mar 24th 2012

Wally West 6.4 für Barry Allen 6.4

Code

As promised, just come along with Wally West.




The kit is now in the Annex releaster and can be used together with the 6.2 version of the current BA final.




WW 4.6 supports only devices from 512MB up to 32GB and everything is as WW device accepts.




WW 4.6 labelt the BA and the WW and ww partition now ba, which you can use it ONLY with more of the combined BA 6.4 also supports.




Please for the layout 3 not too strict in terms of the partition size by the file system overhead and the fixed block sizes, the final image partition is often a bit too small or too large to be. Only if it is extreme (ie more than + / - 20%) or a partition therefore lacks the reports as an error.




The current kit has now if it can be installed in an image without busybox fdisk fdisk own it, so that WW should now actually work in images where the image is only sfdisk.




Necessary for WW dosfstools lie with a OoZooN image on the feed and if you install with ipkg update has done it before, or they are obtained from there by hand:




Thx gutemine

Display More

Multiboot mit Wally West & Barry Allen

Code

Multiboot with Wally West and Barry Allen
My first attempts to deal with me were the subject of much uncertainty dominated, because I did not know what where like .. must be established. Here I will now try to write a guide for setting up and configuring a multi-boot environment on the basis of Wally West and Barry Allen.




PS: It is finished. The current version of the manual is completed.




Stand: Thu 15th March 2012




Changes: (sort of new -> old)




- Individual terms revised, typos fixed.
- New sections to troubleshoot, which images, enabling boot manager and wobble option
- Section of the BIOS settings revised.
- Update & upgrade with ipkg or opkg
- Updating of Images in BA using Telnet
- Typos
- Configuration of the storage medium with BA Wally West
- Revised wording, removes small (er) error
- Boot with revised wobble bootmanager
- System (Image, BIOS)
- Booting kernel with and without replacement (-> wobble manager)







Thx wysiwyg

Display More

Wally West for Barry Allen- Latest versions

Participate now!

Share

Tags