See here for details:http://linuxsat-support.com/showthread.php?t=107574
Attached are a few binaries. I do not have a dreambox to test with, so someone please confirm it is working...
See here for details:http://linuxsat-support.com/showthread.php?t=107574
Attached are a few binaries. I do not have a dreambox to test with, so someone please confirm it is working...
I'm trying to 121W, partially works some channels not yet decodes the audio, but if this FIX for AC3 better than the last.
hi solo 4k plz
hi solo 4k plz
Sorry, I am not sure which cross compiler is needed for the solo 4k. Hopefully it will be added soon to simplebuild.
hi joe !!
on dm 800HD openpli 2.1 (the last imag for this old box ) i try to fix the time but :(
i dont now what i mast to do to make 3-4 ms (on dm500 HD clone with openpli 2.1 work perfect with the same oscam )
oscam-svn11212-mipsoe20-webif-oscam-emu.11212-patched.tar.gz
oscam.conf
QuoteDisplay More[global]
logfile = /var/log/oscam.log
nice = -1
preferlocalcards = 1
[cache]
[streamrelay]
stream_relay_enabled = 0
[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
delayer = 60
ecminfo_type = 1
user = linuxsatsupport
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 2
boxtype = dreambox
[webif]
httpport = 16402
httptpl = /etc/tuxbox/config/tpl/
httprefresh = 30
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 192.168.0.0-255.255.255.255,127.0.0.1
http_status_log = 1
i dont know on oscam.version need all this , i only work the oscam for pv and biss
QuoteDisplay MoreBox type: dm800 (generic)
PID: 5996
TempDir: /tmp/.oscam
ConfigDir: /etc/tuxbox/config/oscam-stable/
WebifPort: 16402
Web interface support: yes
LiveLog support: yes
jQuery support intern: yes
Touch interface support: no
SSL support: no
DVB API support: yes
DVB API with AZBOX support: no
DVB API with MCA support: no
DVB API with COOLAPI support: no
DVB API with COOLAPI2 support: no
DVB API with STAPI support: no
DVB API with STAPI5 support: no
DVB API read-sdt charsets: yes
Irdeto guessing: yes
Anti-cascading support: yes
Debug mode: yes
Monitor: yes
Loadbalancing support: yes
Cache exchange support: yes
CW Cycle Check support: yes
LCD support: no
LED support: no
Emulator support: yes
Clockfix with realtime clock: yes
IPv6 support: no
camd 3.3x: no
camd 3.5 UDP: yes
camd 3.5 TCP: yes
newcamd: yes
CCcam: yes
CCcam share: yes
gbox: yes
radegast: yes
scam: yes
serial: yes
constant CW: yes
Pandora: yes
ghttp: yes
Reader support: yes
Nagra: yes
Irdeto: yes
Conax: yes
Cryptoworks: yes
Seca: yes
Viaccess: yes
NDS Videoguard: yes
DRE Crypt: yes
TONGFANG: yes
Bulcrypt: yes
Griffin: yes
DGCrypt: yes
cardreader_phoenix: yes
cardreader_internal_azbox: no
cardreader_internal_coolapi: no
cardreader_internal_coolapi2: no
cardreader_internal_sci: yes
cardreader_sc8in1: yes
cardreader_mp35: yes
cardreader_smargo: yes
cardreader_pcsc: no
cardreader_smartreader: no
cardreader_db2com: yes
cardreader_stapi: no
cardreader_stapi5: no
cardreader_stinger: yes
- - - Updated - - -
sorry i make mistace on whitch version i work
this is : oscam-svn11212-mipsel-webif-oscam-emu.11212-patched
I am not sure what you are asking. It works and you only want to reduce response times? Or it doesn't work and you think response times are the problem?
I am not sure what you are asking. It works and you only want to reduce response times? Or it doesn't work and you think response times are the problem?
its work m8 !!
jast o was thinking that if i fix the time to 3-4ms like the clone 500HD i have meybe that dm800HD works fasters but i dont think sow !!
You can try telneting to each box and running "top" - it will show you what is using CPU. But 20-30ms is not a problem at all.
Here's the android-arm Version:
Don’t have an account yet? Register yourself now and be a part of our community!