gbox.net.git811.K.public1
gbox.net.git811.K.public1
-
- Gbox
- kurt 80
- Thread is marked as Resolved.
-
-
What does this
-
for Dream-OS
thx@romeo-golf
- - - Updated - - -
What does this
problem if use more as one gbox in one net
etc:
D: { some.dyndns.org { 1234 2499 { AAAA1234 { 02 02 }}}} #box 1
D: { some.dyndns.org { 1234 2599 { BBBB1234 { 02 02 }}}} #box 2result: switch ports to 0
FATAL ERROR: some.dyndns.org has the same IP and RX port as entry X !!!
You MUST change one of them.
IP 123.456.789.01 Port 0-0 ID 1234 pass BBBB1234 sharelevel 2/2 (some.dyndns.org) -
Display More
for Dream-OS
thx@romeo-golf
- - - Updated - - -
problem if use more as one gbox in one net
etc:
D: { some.dyndns.org { 1234 2499 { AAAA1234 { 02 02 }}}} #box 1
D: { some.dyndns.org { 1234 2599 { BBBB1234 { 02 02 }}}} #box 2result: switch ports to 0
FATAL ERROR: some.dyndns.org has the same IP and RX port as entry X !!!
You MUST change one of them.
IP 123.456.789.01 Port 0-0 ID 1234 pass BBBB1234 sharelevel 2/2 (some.dyndns.org)mipsel.deb is only for Dm7080 and Dm820
-
There is time on the VU + Duo 2 with VTI9. 0.1 is tested with HD03
have only the content from the "keys" folder to 'usr/keys"on the box in pushed - finished - but whether it good for ne V14 is to run in a GBox_Cam - told since really no idea about this cam - has been first time my that I've tested - also don't know how you can see what how where what map and .log data and the same - so for me is this cam not - o. K for people who only have HD03 or HD04 is they maybe quite useful ... -
installing arm version on solo 4k, placed gbox.arm.Apollo in usr/bin folder and the key files in var/keys .
shouldn't there be a cam script also?
-
installing arm version on solo 4k, placed gbox.arm.Apollo in usr/bin folder and the key files in var/keys .
shouldn't there be a cam script also?
Which image ?
-
-
FTP the script to /usr/camscript
FTP configs to /etc/tuxbox/config -
FTP the script to /usr/camscript
FTP configs to /etc/tuxbox/configthanks. To test I used a know biss key for fox sports hd on 7east but it isn't opening. I tried the constcw file in var/keys as well as etc/tuxbox/config
C: { 0046b10c ffff ffff 0001 0100 { AAxxxxxxxxxxxxxx AAxxxxxxxxxxxxxx }} #7e Fox Sports Europe HD
-
-
Same here, using openblackhole. Can`t get it to start in telnet..
-
gbox.arm.nevis gives the error about shared libs
-
You could try this -> [How-To] Mipsel Emulator on Vu+ SOLO 4K
-
You could try this -> [How-To] Mipsel Emulator on Vu+ SOLO 4K
tried that but get invalid elf image for this architecture
moded the camscript to this
/usr/bin/qemu-mipsel -L /usr/gnemul/qemu-mipsel/ /usr/bin/gbox.mips -b -r 2 -c /etc/tuxbox/config -
thanks. To test I used a know biss key for fox sports hd on 7east but it isn't opening. I tried the constcw file in var/keys as well as etc/tuxbox/config
C: { 0046b10c ffff ffff 0001 0100 { AAxxxxxxxxxxxxxx AAxxxxxxxxxxxxxx }} #7e Fox Sports Europe HD
-/tmp/pid.info-
**** Stream Information ****
ns: 0x0046B10C
tsid: 0x0000
onid: 0x0000
sid: 0x0001
epid: 0x1011
vpid: 0x0100
pmt pid: 0x0800
pcr pid: 0x0000
ECM: CaID: 0x2600 -> CaPID: 0x1FFF
**** hashTableECM 0 elements ****
**** hashTableEMM 0 elements ****-/tmp/ecm.info-
==== Constant ECM on CaID 0x2600, pid 0x1FFF ==
CW0: AA xx xx xx xx xx xx DD
CW1: AA xx xx xx xx xx xx DD
decode:Internal
Signature ok-/usr/keys/constcw-
#C: { Namespace TSID ONID SID VPID { ................ ................ }} ;comment max 128 active lines at git806, 64 lines to git804
C: { 0046B10C 0000 0000 0001 0100 { AAxxxxxxxxxxxxDD AAxxxxxxxxxxxxDD }} ;FOX SPORT EUROPE (7E/12556V)
or
#0: { CaID SID { .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. }} ;comment max XXX active lines at git806, XX lines to git804
0: { 26 00 00 01 { AA xx xx xx xx xx xx DD AA xx xx xx xx xx xx DD }} #FOX SPORT EUROPE (7E/12556V)PS: more BISS channels use SID-0001 , that better use C line as 0 line
-
Display More
-/tmp/pid.info-
**** Stream Information ****
ns: 0x0046B10C
tsid: 0x0000
onid: 0x0000
sid: 0x0001
epid: 0x1011
vpid: 0x0100
pmt pid: 0x0800
pcr pid: 0x0000
ECM: CaID: 0x2600 -> CaPID: 0x1FFF
**** hashTableECM 0 elements ****
**** hashTableEMM 0 elements ****-/tmp/ecm.info-
==== Constant ECM on CaID 0x2600, pid 0x1FFF ==
CW0: AA xx xx xx xx xx xx DD
CW1: AA xx xx xx xx xx xx DD
decode:Internal
Signature ok-/usr/keys/constcw-
#C: { Namespace TSID ONID SID VPID { ................ ................ }} ;comment max 128 active lines at git806, 64 lines to git804
C: { 0046B10C 0000 0000 0001 0100 { AAxxxxxxxxxxxxDD AAxxxxxxxxxxxxDD }} ;FOX SPORT EUROPE (7E/12556V)
or
#0: { CaID SID { .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. }} ;comment max XXX active lines at git806, XX lines to git804
0: { 26 00 00 01 { AA xx xx xx xx xx xx DD AA xx xx xx xx xx xx DD }} #FOX SPORT EUROPE (7E/12556V)PS: more BISS channels use SID-0001 , that better use C line as 0 line
the issue is running gbox 8xx on solo4k, it works fine on my legacy mips receiver. Would like to get it working using arm version or mips emu on the solo 4k
-
the issue is running gbox 8xx on solo4k, it works fine on my legacy mips receiver. Would like to get it working using arm version or mips emu on the solo 4k
if use openpli based image need pmt helper deamon
-
if use openpli based image need pmt helper deamon
EnoSat , where i can find this " pmt helper deamon " for my openpli image ?
Thanks
-
goes anyone have the ipk?
cant find it anywhere. gbox 811k is included in vti image cams but I cant find the ipk so I can install it on other images :(
-
gbox 811k is included in vti image cams but I cant find the ipk so I can install it on other images
You can grab the ipk from /tmp folder while downloading from the VTi addons feed.
Go to /tmp > download from the feed > refresh /tmp > download ipk from here.
An ipk built for VTi images won`t be compatible with other images. The directory structure for softcams is different on all images.
Which other image do you need gbox ipk for ?
Attach gbox ipk from the VTi feed, then we can remake an ipk for other images.
-
Your resource for all other softcam support
