purpose of CamoFS-IP Cam surveillance

It is a plugin which will allow your ip/networked camera(s) to be viewed from your receiver.

Quote

Function:
- Indication of any number of network cameras
- Name URLs usable, eg dyndns
- CGI commands to the camera (s) send (Pan & Tilt ..)
- Monitoring a camera movement and automatic. save the images or more cameras without saving
- Advanced motion monitoring (selectable): cam-check expert
(Must be set a bit more complicated, but allows for error-free, reliable detection, load the box but is also slightly higher) (only functioning jpg_Einstellung)
- Use of external motion detection if this can / create a file in / tmp
(File name in the settings specify) (for "pure video" camera setting)
- Monitoring a directory, display the selected camera in the new file, if the file name (! Without extension) corresponds to the name of a camera will be displayed this
- Alarm output (image or text) for multiple cameras at file in / tmp, but without storing images
(, / Tmp / al_cam1 '-> AL_ + section name, that file / tmp / al_cam2 and / tmp / al_cam3 trigger an alarm for these two cameras)
- Possible with alarm -> display text, image or mini plug Start
- Alarm screen adjustable in size, location as Symbol
- Extensive setting tehre
- Permanently viewable Thumbnail Image (optional variable adjustable on all cameras, Posistion and size -Attention: the boxes can usually show the Thumbnail Image no stream, therefore only for jpg display!)

Display More

Google translate from:

Quote

http://www.fs-plugins.de/en/camofs/