I have been searching for days to find out if you can send a feed to another tv using the RF2 output. When i do a scan all I'm getting is free to air digital channels. I'm trying to get the sky channels to go out via RF2 output. Don't know if there is a cross over from the sky tuner to the RF2. The box i'm using is a Zgemma H2H. Any suggestions would be greatly appreciated.
Zgemma H2H RF output/ magic eye
- bigdes
- Thread is marked as Resolved.
-
-
It's only a cable/aerial loop-through (no internal modulator as far as I'm aware)
You'll probably need a modulator (tri-link) connected to the phono outputs to send the picture to another remote tv via rf cable. -
No idea about modulator in this box but if there was you would need to check the analog channels anyway
Can't see it being digital. They cost far more than the box -
good morning ,u need cable rca yellow,red,white plus modulador and runing cable from modulador to tv, or other solution another znegma s basic setup stream turner.
need internet .
-
I thought I had to go down that root with a modulator. Is it possible to run a magic eye with this modular : Mercury ILS102 RF Video Modulator along with a booster that would power the magic eye.
-
Don't think it would be possible as it would need some way of passing the remote commands back to the zgemma.(no ir interface in that modulator)
A tri-link with magic eye has this feature (ir cable supplied) or you could always use your smart phone as a remote (quite a few enigma2 remote apps available) -
Im using a Trilink made by Triax and have a magic eye in another room works great
-
Thanks guys for your help. I have come across this product I think it should work. I know it definitely works on original receivers.
-
That Labgear is basically just another version of the Triax Tri-Link so will work no problem
-
yea thats my setup pretty much
-
Thanks got sorted think I'm going to go down this road I have come across this wee kit for under £25 I think it's a real bargain. If it's any good or not time will tell.
This is the complete solution to solve theimage mosaic, color distortion, transmission failure and other problems whenHDMI signal long distance transmitted. It's the professional signaltransmission system which combines the function of HDMI signal conversion, reception and reduction and designed for high quality HDMI video signallong-range extension of display system project, such as Big screen curtain walladvertising project, Industrial automatic control, Armamentarium, CCTV, Multimediainstruction and so on. Built-in IR Extender function, you can use your device's IR remote to point to the receiver and control the device, for example, control DVD to play or pause. We recommend using quality cables between ext/rec for best perfomance unit has a built in automatch adjustment to output best possible signal for length of cable attached.
We will test the item before sending to you, if the item can not work, please check your device and your cable firstly, Cat6/Cat6a or Cat7 with shielded 568B RJ45 Connectors is recommended for long distance.
∠ FEATURES
> Cable testing showed that with 1080p resolution the HDMI input source can be 60meters away.
> Uses CAT 5E, CAT6, CAT6A or CAT7 cable to substitute HDMI cable to achieve long distance transmission, low resistance and consumption oxygen-free copper core Cat6/Cat6a or Cat7 is recommended for long distance.
> Supported Resolutions: 480i up to 1080p. Follow the standard of IEEE-568B.
> Signalling rates up to 2.25Gbps in support of 1080p display.
> Supports uncompressed HDMI, Audio (LPCM), and HDCP.
> Built-in IR Extender function, support 20 - 60KHz.
> Easily extends HDTV Sources with an extremely low profile design which can be mounted behind TV or equipment using screws holes if required.
> Extend output from DVD, Blu-ray, PS3, PS4, XBox360, XBox One, PC and any other HD Device.
> Full HD Lossless: In addition to this amazing technology, all displays connected will receive a picture-perfect. -
Don't forget to get a splitter and a splitter that will go to screens at once. As soon dont
-
master G
Moved the thread from forum ZGemma-Star Support to forum Zgemma H2 series.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!