i thought modem mode was for using your own router with the modem
I don't have one of these hubs but from previous posts that have appeared on here from other members etc.... when you change the hub over to modem mode only have you got your router connected to it that you were using previously?
i presume you have looked here https://help.virginmedia.com/system/selfservice.controller?CMD=VIEW_ARTICLE&ARTICLE_ID=27555&CURRENT_CMD=SEARCH&CONFIGURATION=1001&PARTITION_ID=1&USERTYPE=1&LANGUAGE=en&COUNTY=us&VM_CUSTOMER_TYPE=Cable
can i also ask what other wireless router you are using as im sure it has to be a cable one
heres the guide from them for superhub 2 :)
also what router you using and ensure your router is conected to superhub2 in right port :)
paul yep its a cable router
@honcho yep can only be connected to 1 port as describe VM web site
Router zyxel
whats your FW rev ? example ? V2-01-03
has broke the modem only mode so if you on this FW you will need to try either update to newer FW or downgrade if your able to
source : http://community.virginmedia.c…-mode/td-p/2860733/page/3
also look into haxoware as the modem on this picture on right
https://allyours.virginmedia.c…ges/50Mb/modem-router.jpg
when had a 50mg sub with vermin i was able to dump the superhub and get all docs3 certs
and clone to the above modem this was issued for a time by vermin and can actually do approx 300meg
i dont think the process will have changed much by now as my test run was given to another many years ago
as i moved supplier and n longer use vermin , i'll see if i still have the tools of guides but i dont hold my breath
as ive had many HDD failers and some data just could never recover or resource again
Don’t have an account yet? Register yourself now and be a part of our community!
