Hi
running a DB800SE clone as a server, with 2 subs NC+ and redlight fusion
i had everything working just fine, with a Open Pli image and CCcam 2.3.0 i left it running for about 2 weeks because i did initially have problems.
once CCcam had been running faultlessly for the time i changed to oscam, that seemed to work just fine as well, a couple of days i noticed that redlight was not not clearing i restarted the cam then had to do a reboot to activate it again, it works for about 10 mins then packs up again as does oscam.
I have been on a different open pli image a more recent one, so i've now installed an Open ATV version 5.2 still got the same problem CCcam 230 locks up and i can't even get oscam working on this image.
dunno what else i can tell you, please help poor old canthackit.
best regards: canthackit
ok so here's an update.
it appears that the NC+ sub is running fine with CCcam 230 i'm on a HD Film channel and have been since i first posted it's worked glitch free, so that would mean that redlight is the problem.
- - - Updated - - -
ok then i'll answer myself :good morning1:
not had any luck with the clone and CCcam, so put my cards in my client box a Solo 4K with oscam both cards worked straight away and ran for about 1 hour.
so tried the 800 clone still the same problem, tried with a smargo triple, box won't even recognise the device.
eventually perservered with trying to get oscam to work on this ATV image, had to wait a considerable time for it to activate but it's working and redlight hd is clearing and has been for 90 mins........i'm hopefull this has solved the problem but i wont know for sure until it's been running consistantly for at least 48 hours.
if it does it will just confirm my suspicions that the card readers in these clones are crap and they don't particularly like CCcam.
regards: canthackit
