omnikey 3121 centos 7 setup

**Javajoeuk** · May 15th 2016

hi just setting this up on my server using centos7

HTML

http://linuxsat-support.com/showthread.php/1712-How-to-install-Omnikey-readers-on-Linux-PC

plugged in and get this fron lsubs

Code

Bus 003 Device 003: ID 076b:3021 OmniKey AG CardMan 3121

so have set the reader up like this

Code

[reader]
label                         = omnikey
description                   = omnikey
protocol                      = pcsc
device                        = 2
caid                          = 0963
detect                        = cd
group                         = 2
emmcache                      = 1,3,2
blockemm-unknown              = 1
saveemm-u                     = 1
saveemm-s                     = 1

Display More

ive got an old sky card to test it with dont know if it will work.
when i runn pcscd -H i dont get any info on the reader?
Any help would be great.

**TH3-J0K3R** · May 15th 2016

your device is set to 2 in last config set it to 3 as the lsubs says it is 003 then save and restart

**master G** · May 15th 2016

Keep changing the device from 0, to 1, to 3 and so on until you get the correct port.

In the oscam web-interface click readers then scan usb.. Do oscam see the omnikey ?

**Javajoeuk** · May 15th 2016

tried changing it to device 3 and yes usb scan show it

Code

Bus 003 Device 003: ID 076b:3021 OmniKey AG CardMan 3121
      iProduct 2 Smart Card Reader USB
      iSerial 0

what should the reader say?

**master G** · May 15th 2016

That`s exactly how my reader looks after a scan and the device i use is 0

**Javajoeuk** · May 15th 2016

just got this from the log

Code

16/05/15 16:19:29 780AA0 r omnikey [pcsc] Wrong pcsc_reader index: 3
2016/05/15 16:19:29 780AA0 r omnikey [pcsc] Cannot open device: 3
2016/05/15 16:20:29 780AA0 r omnikey [pcsc] Wrong pcsc_reader index: 3
2016/05/15 16:20:29 780AA0 r omnikey [pcsc] Cannot open device: 3
2016/05/15 16:21:29 780AA0 r omnikey [pcsc] Wrong pcsc_reader index: 3
2016/05/15 16:21:29 780AA0 r omnikey [pcsc] Cannot open device: 3

change device to 0 this is the log

Code

2016/05/15 16:30:26 780AC0 r omnikey [pcsc] Error getting card status.
2016/05/15 16:30:26 780AC0 r omnikey [pcsc] cardreader_do_checkhealth: !reader_card_inserted
2016/05/15 16:30:26 780AC0 r omnikey [pcsc] cardreader_do_checkhealth: reader->card_status = 4, ret = 0
2016/05/15 16:30:27 780AC0 r ERROR, function call reader->crdr.get_status(reader, &in) returns error.

**master G** · May 15th 2016

Is the chip side of the card facing the green light on the omnikey ? Does the omnikey blink green and read when the card is inserted ?

**Javajoeuk** · May 15th 2016

yes and yes it flashes red

**master G** · May 15th 2016

If you are not using a recent version of oscam, update it and try the card again..

**Javajoeuk** · May 15th 2016

OSCAM 1.20-unstable_svn build r8670
how recent is this

**TH3-J0K3R** · May 15th 2016

very old its like 5 numbers now

**Javajoeuk** · May 15th 2016

downloaded and compiled latest with pcsc

Code

2016/05/15 19:09:08 6ACA5935 r   (reader) omnikey [pcsc] PCSC failed establish context (8010001d)
2016/05/15 19:09:08 6ACA5935 r   (reader) omnikey [pcsc] Cannot open device: 0
2016/05/15 19:09:10 6ACA5935 r   (reader) omnikey [pcsc] PCSC failed establish context (8010001d)

- - - Updated - - -

reinstalled and restart pcscd and got this in the logs does this mean its working?

Code

2016/05/15 19:45:11 6ACA5935 r   (reader) omnikey [pcsc] PCSC failed establish context (8010001d)
2016/05/15 19:45:11 6ACA5935 r   (reader) omnikey [pcsc] Cannot open device: 0
2016/05/15 19:45:13 6ACA5935 r   (reader) omnikey [pcsc] PCSC failed establish context (8010001d)
2016/05/15 19:45:13 6ACA5935 r   (reader) omnikey [pcsc] Cannot open device: 0
2016/05/15 19:45:15 6ACA5935 r   (reader) omnikey [pcsc] PCSC failed establish context (8010001d)
2016/05/15 19:45:15 6ACA5935 r   (reader) omnikey [pcsc] Cannot open device: 0
2016/05/15 19:45:17 6ACA5935 r   (reader) omnikey [pcsc] PCSC failed establish context (8010001d)
2016/05/15 19:45:17 6ACA5935 r   (reader) omnikey [pcsc] Cannot open device: 0
2016/05/15 19:45:19 6ACA5935 r   (reader) omnikey [pcsc] PCSC failed establish context (8010001d)
2016/05/15 19:45:19 6ACA5935 r   (reader) omnikey [pcsc] Cannot open device: 0
2016/05/15 19:45:21 6ACA5935 r   (reader) omnikey [pcsc] Reader initialized (device=0, detect=cd, mhz=357, cardmhz=357)
2016/05/15 19:45:22 6ACA5935 r   (reader) omnikey [pcsc] PCSC was opened with handle: 569846523
2016/05/15 19:45:22 6ACA5935 r   (reader) omnikey [pcsc] card detected
2016/05/15 19:45:22 6ACA5935 r   (reader) omnikey [pcsc] ATR: 3F FD 13 25 02 50 00 0F 33 B0 0F 69 FF 4A 50 D0 00 00 53 59 02 
2016/05/15 19:45:23 6ACA5935 r   (reader) omnikey [pcsc] Card type:   SYAV
2016/05/15 19:45:23 6ACA5935 r   (reader) omnikey [pcsc] Rom version: 40LF
2016/05/15 19:45:23 6ACA5935 r   (reader) omnikey [pcsc] Credit available on card: 0 euro
2016/05/15 19:45:23 6ACA5935 r   (reader) omnikey [pcsc] FuseByte: 25
2016/05/15 19:45:23 6ACA5935 r   (reader) omnikey [pcsc] Region Code: TS8     
2016/05/15 19:45:23 6ACA5935 r   (reader) omnikey [pcsc] Country Code: GBR
2016/05/15 19:45:24 6ACA5935 r   (reader) omnikey [pcsc] classD1 ins742A: failed
2016/05/15 19:45:24 6ACA5935 r   (reader) omnikey [pcsc] Pincode read: 0160
2016/05/15 19:45:24 6ACA5935 r   (reader) omnikey [pcsc] PCB settings: FF FF FF 0
2016/05/15 19:45:24 6ACA5935 r   (reader) omnikey [pcsc] type: VideoGuard BSkyB (0963), caid: 0963
2016/05/15 19:45:24 6ACA5935 r   (reader) omnikey [pcsc] serial: ########, BoxID: ########, baseyear: 1997
2016/05/15 19:45:24 6ACA5935 r   (reader) omnikey [pcsc] ready for requests
2016/05/15 19:45:24 6ACA5935 r   (reader) omnikey [pcsc] found card system videoguard2
2016/05/15 19:45:24 6ACA5935 r   (reader) omnikey [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No  1 out of max alloted of 1
2016/05/15 19:45:24 6ACA5935 r   (reader) omnikey [videoguard2] card detected
2016/05/15 19:45:24 6ACA5935 r   (reader) omnikey [videoguard2] type: VideoGuard BSkyB (0963)
2016/05/15 19:45:24 6ACA5935 r   (reader) omnikey [videoguard2] ------------------------------------------------------------------
2016/05/15 19:45:24 6ACA5935 r   (reader) omnikey [videoguard2] |- class -|-- tier --|----- valid to ------|--- package name ----|
2016/05/15 19:45:24 6ACA5935 r   (reader) omnikey [videoguard2] +---------+----------+---------------------+---------------------+
2016/05/15 19:45:24 6ACA5935 r   (reader) omnikey [videoguard2] |-- 00 ---|-- 0003 --| 2015/09/22-01:00:00 | 
2016/05/15 19:45:24 6ACA5935 r   (reader) omnikey [videoguard2] |-- 00 ---|-- 000b --| 2015/09/22-01:00:00 | 
2016/05/15 19:45:24 6ACA5935 r   (reader) omnikey [videoguard2] |-- 00 ---|-- 001d --| 2015/09/22-01:00:00 | 
2016/05/15 19:45:24 6ACA5935 r   (reader) omnikey [videoguard2] |-- 0d ---|-- 0d65 --| 2015/09/04-01:05:46 | 
2016/05/15 19:45:24 6ACA5935 r   (reader) omnikey [videoguard2] |-- 0d ---|-- 0d66 --| 2015/09/04-01:05:46 | 
2016/05/15 19:45:24 6ACA5935 r   (reader) omnikey [videoguard2] |-- 0d ---|-- 0d72 --| 2015/09/04-01:05:46 | 
2016/05/15 19:45:24 6ACA5935 r   (reader) omnikey [videoguard2] |-- 0d ---|-- 0d73 --| 2015/09/04-01:05:46 | 
2016/05/15 19:45:24 6ACA5935 r   (reader) omnikey [videoguard2] |-- 0e ---|-- 0e60 --| 2015/09/22-01:05:48 | 
2016/05/15 19:45:24 6ACA5935 r   (reader) omnikey [videoguard2] ------------------------------------------------------from-ins70--

Display More

**master G** · May 15th 2016

Its a few years old buddy..

Tutorial: Updating Oscam to latest SVN - Ubuntu & debian with Simplebuild

Looks like its reading the card, i can see your entitlements are out of date, so nothing will open until you get an EMM..

**Javajoeuk** · May 15th 2016

Think the card was out of an old box so probably cancelled was just to make sure it worked before I move my other card over

**master G** · May 15th 2016

The card can still be used as a freeview card, it will probably take a week to get the correct emm to update it, then you should have around 5 entitlements..

**Javajoeuk** · May 15th 2016

So do I just set au on the card and a user to update it

**master G** · May 15th 2016

That`s correct, create an [account] for another receiver and give it au rights.
Match the readers label with au. For example:
oscam.server
[reader]
label = skyuk

oscam.user
[account]
au = skyuk

**Javajoeuk** · May 16th 2016

I think the card received the info

Code

2016/05/16 17:57:11 044317B2 r   (reader) skyuk [videoguard2] classD3 ins54: no cw --> Card needs pairing/extra data
2016/05/16 17:57:11 044317B2 r   (reader) skyuk [videoguard2] classD3 ins54: no cw --> Tier expired

and the entitlements change to this

Code

tier	0963	000000	0000000000000003	00000000	2008-12-31	2015-09-22	0963@000000 unknown
tier	0963	000000	000000000000000B	00000000	2008-12-31	2015-09-22	0963@000000 unknown
tier	0963	000000	000000000000001D	00000000	2008-12-31	2015-09-22	0963@000000 unknown
tier	0963	000000	0000000000000D65	0000000D	2008-12-31	2015-09-04	0963@000000 unknown
tier	0963	000000	0000000000000D66	0000000D	2008-12-31	2015-09-04	0963@000000 unknown
tier	0963	000000	0000000000000D72	0000000D	2008-12-31	2015-09-04	0963@000000 unknown
tier	0963	000000	0000000000000D73	0000000D	2008-12-31	2015-09-04	0963@000000 unknown
tier	0963	000000	0000000000000E60	0000000E	2008-12-31	2015-09-22	0963@000000 unknown

so when i change cards it should update to activated card.

omnikey 3121 centos 7 setup

master G Feb 5th 2022

Participate now!

Share

Tags