Most channels work perfectly fine, except for a handful which have decode issues. However those problem channels will kick in for a few seconds before stopping again. The problem seems to switch between channels every month or so (not had the box for long, but originally it was a different channel this always happened on, now that channel is fine all the time and its a different channel that has the issue).
Box is a zgemma h2s running the latest openatv and the "normal plugins" (nothing fancy, just followed the kiddac setup guide mainly). Channel is signal is strong (72% SNR) and the picture is fine for the odd few seconds it works every now and then (which also indicates the line provider has access to this channel otherwise it would never work).
Here's an extract from the log file (line provider anonymised)
Code
[mg0] newcamd route line.provider.org:13344 cant decode (35ms)
[mg0] -> ECM to newcamd line.provider.org:13344
[mg0] newcamd route line.provider.org:13344 cant decode (34ms)
[mg0] -> ECM to newcamd line.provider.org:13344
[mg0] newcamd route line.provider.org:13344 cant decode (36ms)
[mg0] -> ECM to newcamd line.provider.org:13344
[mg0] newcamd route line.provider.org:13344 cant decode (34ms)
[mg0] -> ECM to newcamd line.provider.org:13344
[mg0] newcamd route line.provider.org:13344 cant decode (36ms)
[mg0] -> ECM to newcamd line.provider.org:13344
[mg0] newcamd route line.provider.org:13344 cant decode (34ms)
[mg0] -> ECM to newcamd line.provider.org:13344
[mg0] <- CW from newcamd line.provider.org:13344 (34ms)
[mg0] 34 msec -- Fri May 20 14:03:46 2016
system: NDS
caid: 0x0963
pid: 0x0501
prov: 000000
cw0:0 54 B9 A4 B1 0C A1 01 AE
cw1:0 61 0D 22 90 43 21 3F A3
[mg0] -> ECM to newcamd line.provider.org:13344
[mg0] <- CW from newcamd line.provider.org:13344 (48ms)
[mg0] 48 msec -- Fri May 20 14:03:53 2016
system: NDS
caid: 0x0963
pid: 0x0501
prov: 000000
cw0:0 D3 CB 03 A1 1F A0 15 D4
cw1:0 61 0D 22 90 43 21 3F A3
[mg0] -> ECM to newcamd line.provider.org:13344
[mg0] <- CW from newcamd line.provider.org:13344 (34ms)
[mg0] 34 msec -- Fri May 20 14:04:01 2016
system: NDS
caid: 0x0963
pid: 0x0501
prov: 000000
cw0:0 D3 CB 03 A1 1F A0 15 D4
cw1:0 01 58 FB 54 57 C7 73 91
[mg0] -> ECM to newcamd line.provider.org:13344
[mg0] <- CW from newcamd line.provider.org:13344 (37ms)
[mg0] 37 msec -- Fri May 20 14:04:09 2016
system: NDS
caid: 0x0963
pid: 0x0501
prov: 000000
cw0:0 4B 77 EE B0 CB A6 B4 25
cw1:0 01 58 FB 54 57 C7 73 91
[mg0] -> ECM to newcamd line.provider.org:13344
[mg0] newcamd route line.provider.org:13344 cant decode (34ms)
[mg0] -> ECM to newcamd line.provider.org:13344
[mg0] newcamd route line.provider.org:13344 cant decode (33ms)
[mgcamd] emm started
EMM: CaID: 0x0960 -> CaPID: 0x00C0 ProvID: 000000
EMM: CaID: 0x0961 -> CaPID: 0x00C0 ProvID: 000000
EMM: CaID: 0x0963 -> CaPID: 0x00C0 ProvID: 000000
[mgcamd] emm stopped
[mg0] -> ECM to newcamd line.provider.org:13344
[mg0] newcamd route line.provider.org:13344 cant decode (39ms)
[mg0] -> ECM to newcamd line.provider.org:13344
[mg0] newcamd route line.provider.org:13344 cant decode (34ms)
[mg0] -> ECM to newcamd line.provider.org:13344
[mg0] newcamd route line.provider.org:13344 cant decode (34ms)
[mg0] -> ECM to newcamd line.provider.org:13344
[mg0] newcamd route line.provider.org:13344 cant decode (37ms)
[mg0] -> ECM to newcamd line.provider.org:13344
[mg0] newcamd route line.provider.org:13344 cant decode (38ms)
[mg0] -> ECM to newcamd line.provider.org:13344
[mg0] newcamd route line.provider.org:13344 cant decode (33ms)
[mg0] -> ECM to newcamd line.provider.org:13344
[mg0] newcamd route line.provider.org:13344 cant decode (45ms)mg_cfg
Code
# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }
# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }
# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 02 }
# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 01 } 0x12c0
# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }
# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccamd netclient, card list saved as /tmp/cccamd.info
# (ECM only, supported server version up to 2.1.1, later not work)
G: { 33 }
# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30
# network ecm timeout in seconds
K: { 10 }
# newcamd dead routes connect retry, sec
Q: { 600 }
# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 00 }
# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } username password
# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80
# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 04 } 172.16.1.1 28007 /tmp/mgcamd.log
# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }
# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E:) time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }
# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }
# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }
# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 06 }
# map all 180x nagra caids to 1801
# default is 01
F: { 00 }Can anyone shed any light on the issue?
