Help needed Oscam - CCCam with viasat 093E card

There are 6 replies in this Thread which was already clicked 2,886 times. The last Post () by yatzi050.

    Hi.


    I've been using only CCCAM with a local CMore card for some years but recently I also bought a Swedish Viasat card wich I'm trying to activate in my VU+ Solo SE with the internal card reader.
    I have successfully installed the cam and also the config files from this tread http://linuxsat-support.com/sh…-with-VU-Solo2-and-Viasat
    but I still don't get any picture from the Viasat channels.


    I can not access the oscam webif.
    Is there any way of knowing for sure that oscam is running?
    Do I need to add boxkey?
    Is there any way of checking why my setup is not working?



    My config:
    [global]
    nice = -1
    logfile = /dev/null
    clienttimeout = 5000
    fallbacktimeout = 2500
    clientmaxidle = 120
    cachedelay = 120
    bindwait = 120
    resolvedelay = 30
    serialreadertimeout = 1500
    maxlogsize = 10
    waitforcards = 1
    preferlocalcards = 1
    saveinithistory = 1
    keepalive = 1


    [webif]
    httpport = 8888
    httpuser = user
    httppwd = pass
    httprefresh = 5
    httphideidleclients = 0
    httpallowed = 192.168.0.0 - 255.255.255.255
    debug = 255


    [newcamd]
    key = 0102030405060708091011121314
    port = 34001@093E:000000


    Server-file:
    [reader]
    label = VIASAT
    Protocol = internal
    detect = CD
    device = /dev/sci0
    Group = 1
    EMMCache = 1,3,2
    CAID = 093E
    ident = 093E:000000
    BoxID = CF1XXXB8
    mhz = 600
    cardmhz = 357


    User-file:
    [account]
    user = linuxsat
    pwd = support
    monlevel = 0
    uniq = 0
    group = 1
    au = VIASAT
    caid = 093E
    ident = 093E:000000


    CCCAM:
    SERVER LISTEN PORT : 12000
    ALLOW TELNETINFO: yes
    ALLOW WEBINFO: yes
    WEBINFO USERNAME :root
    WEBINFO PASSWORD :dreambox
    TELNETINFO USERNAME :root
    TELNETINFO PASSWORD :dreambox
    TELNETINFO LISTEN PORT : 16000
    WEBINFO LISTEN PORT : 16001
    ZAP OSD TIME :0
    OSD USERNAME :root
    OSD PASSWORD :dreambox
    OSD PORT :80
    SHOW TIMING : yes
    DEBUG : no
    NEWCAMD CONF : no
    #DISABLE EMM : yes
    #EXTRA EMM LEVEL : yes
    SHOW EXTENEDED CLIENT INFO : yes
    MINI OSD : no
    #MINIMUM DOWNHOPS: 1
    CHANNELINFO FILE : /var/etc/CCcam.channelinfo
    PROVIDERINFO FILE : /var/etc/CCcam.providers
    CAID PRIO FILE : /var/etc/CCcam.prio
    LOG WARNINGS : /tmp/warnings.txt
    SOFTKEY FILE : /var/keys/SoftCam.Key
    AUTOROLL FILE : /var/keys/AutoRoll.Key
    #STATIC CW FILE : /var/keys/constant.cw
    #BOXKEY: /dev/sci0
    #SMARTCARD CLOCK FREQUENCY: /dev/sci0 6800000


    N: 127.0.0.1 34001 linuxsat support 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

    what kind of image on your box?
    The card is paired to sd tuner and card works in this?
    093E will only have boxid to function in oscam.
    You do not need CCcam, Oscam do it alone with both your card and share to CCcam with CCcam protocol.

    Quote from hacked

    what kind of image on your box?
    The card is paired to sd tuner and card works in this?
    093E will only have boxid to function in oscam.
    You do not need CCcam, Oscam do it alone with both your card and share to CCcam with CCcam protocol.


    Thanks for your reply. This is driving me crazy...
    I installed an new blackhole image yesterday because I was not able to successfully install oscam on the previous image.
    I actually do not have the sd tuner so I have not tested. (my friend who bought the card+box still have the box)
    I have tried also with boxkey in the oscam as you can see in my previous post. (the two X:s are something else) . I got the 11 digit boxid from the box removed the leading zero and converted it to hex with the windows calculator.
    I do not really understand your last comment? Is there something wrong with my config?

    Nothing wrong with your config, just that oscam do the job alone.
    Install of Oscam / CCcam not needed.
    Forget this preliminary!
    Can you see if your card has entitlements in the log when you log into webif.



    I sent you a PM.

    Quote from hacked

    Nothing wrong with your config, just that oscam do the job alone.
    Install of Oscam / CCcam not needed.
    Forget this preliminary!
    Can you see if your card has entitlements in the log when you log into webif.



    I sent you a PM.


    Hi.


    I have finaly made some prgress after I noticed the card was not working in the viasat original HD-box.
    I now have a new card that is working in the original box but I still can not get the VU+ to read the card.


    Do I need a Smargo reader or can the VU+ solo Se box internal reader handle it?
    Whats the minimum requirements of the oscam files to get viasat working on the local box?




    Web IF LOG:

    Internal reader is good enough.
    You say your card works in Viasat HD tuner?
    The card must be paired to an SD tuner.
    You also use the wrong caid on your card, if you look in the log caid is 0940.


    Quote from hacked

    Internal reader is good enough.
    You say your card works in Viasat HD tuner?
    The card must be paired to an SD tuner.
    You also use the wrong caid on your card, if you look in the log caid is 0940.


    Thanks a lot!
    The correct caid was all that was missing. SD box NOT required.


    HD channels not working. Is this normal?

OSCam Support Forum

Configs, discussion, downloads and guides for OSCam Softcam.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login