cannot clear NC+

There are 18 replies in this Thread which was already clicked 3,340 times. The last Post () by seasider.

  • Hi
    having major problems with my new card for cyffra it should include HBO on it, I activated the card with CCcam 2.2.1 and the majority of channels cleared quite quickly and the entitlements are until 30/10/16 but i cannot clear the HBO channels.


    i've been emailing Satsklep for 4 days now without any reply from them, so the only thing left for me to try is oscam but i cant get oscam to clear anything at all i've tried 4 different images with different versions of oscam and nothing.


    atm i've got BH 3.0.2F on a DB800SE clone running oscam 11272 with 2 cards Redlight Fusion and NC+Platinum+HBO
    i'll post my configs for someone to check, also if anybody has any info why HBO don't clear i would appreciate it........just to add my client box a VU+ Solo4K works fine and is clearing all my subs but it is also clearing HBO on a share but in Nagra ( I find this reaaly strange)


    oscam.conf
    [global]
    nice = -1
    logfile = /var/log/oscam.log
    clienttimeout = 5000
    fallbacktimeout = 2500
    clientmaxidle = 120
    cachedelay = 120
    bindwait = 120
    resolvedelay = 30
    serialreadertimeout = 1500
    maxlogsize = 10
    waitforcards = 1
    preferlocalcards = 1
    saveinithistory = 1
    keepalive = 1



    [cache]


    [newcamd]
    port = 12001@0500:043800;12001@0100:000068
    key = 0102030405060708091011121314
    keepalive = 1


    [cccam]
    port = 12000
    nodeid = 0558244110821388
    version = 2.1.3
    reshare = 1


    [dvbapi]
    enabled = 1
    au = 1
    user = dvapi
    boxtype = dreambox


    [webif]
    httpport = 8888
    httpuser = linuxsat
    httppwd = support
    httprefresh = 15
    httpshowpicons = 1
    httpallowed = 192.168.0.0-255.255.255.255


    oscam.server
    [reader]
    label = redlight
    protocol = internal
    device = /dev/sci1
    caid = 0500
    detect = cd
    mhz = 375
    cardmhz = 2700
    ident = 0500:043800
    group = 1
    emmcache = 1,3,2
    blockemm-unknown = 1
    blockemm-g = 1
    saveemm-u = 1
    saveemm-s = 1
    cccreshare = 1
    ccchop = 1


    [reader]
    label = CYFRA
    protocol = internal
    device = /dev/sci0
    caid = 0100
    detect = cd
    mhz = 375
    cardmhz = 2700
    ident = 0100:000068
    group = 2
    emmcache = 1,3,2
    blockemm-unknown = 1
    blockemm-g = 1


    oscam.user
    [account]
    user = dvapi
    description = Solo
    au = redlight,CYFRA
    group = 1,2


    [account]
    user = mymonica
    pwd = mypass
    caid = 0500,0100
    uniq = 2
    monlevel = 1
    au = redlight,CYFRA
    group = 1,2
    ident = 0500:043800,0100:000068
    cccmaxhops = 1
    cccreshare = 1


    Hope you can help.
    Best Regards: canthackit


    tried to restart oscam on the BH image the box would'nt boot, so put on a Pli image, tried with the preinstalled ymod still nothing, d/l the oscam from addons and channels cleared before it had even had fully installed...........still no HBO tho.

    Edited 2 times, last by canthackit: Update ().

  • Boss
    will you wait a mo please now oscam has stopped working all together, trying to reactivate it.


    atm i'm getting the message on the info bar that i get on CCcam as well when try to access HBO : "no parse cannot emu" but now i'm getting it on any channel i try to clear. i'm now running Open Pli on my DB800 clone with oscam, channels will clear with CCcam but not with HBO.


    regards: canthackit

  • as i say Boss can't do that at the mo cant activate oscam, it just won't start.


    been trying for ages cannot get oscam to start, this is the only image i've managed to get it working on and i've tried 4, even when i do though i can't access the webif it wont allow me, the only way i will be able to get it to work is to reinstall the image yet again.
    so here i go again another install:06:


    regards: canthackit

  • i've installed your version Boss, tried starting via the remote nothing.
    tried telnet got error message something like unknown parameter.
    blank screen, got all these problems before i can even begin to check the log.


    i'm going to reinstall the image, and install your version of oscam and not the one from plugins, let's see what happens then.


    done a reinstalled, installed the above oscam version, nothing's clearing but getting the "no parse cannot emu" error message at the bottom of the info bar.


    regards: canthackit

  • tried tried and tried yet again tried with 11245 and 11231 tried via remote and telnet, rebooted and rebooted somemore.......nothing oscam just will not run.


    regards: canthackit


    - - - Updated - - -


    ok that way worked eventually Boss at last got into the webif, short log though.
    >> OSCam << cardserver log switched at Sat Sep 3 14:19:06 2016
    -------------------------------------------------------------------------------
    2016/09/03 14:19:06 2E0272A7 c (ecm) local (0100@000068/5C00/290E/64:AF9A2DCA6AEF79029250E08AD5186FD8): not found (1 ms) by CYFRA
    2016/09/03 14:19:06 00000000 >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r11213 (mipsel-oe-linux)
    2016/09/03 14:19:06 2E0272A7 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 7 disabled ecmpids!
    2016/09/03 14:19:06 2E0272A7 c (dvbapi) Demuxer 0 trying to descramble PID 3 CAID 0100 PROVID 000068 ECMPID 02C6 ANY CHID PMTPID 0032 VPID 006E
    2016/09/03 14:19:07 2E0272A7 c (ecm) local (0100@000068/5C00/290E/64:AF9A2DCA6AEF79029250E08AD5186FD8): not found (1 ms) by CYFRA


    hope this helps, would have hoped for a more extensive log.


    regards: canthackit

    • Official Post

    You should have a "Live Log" tab at the top of the web interface, click on it for the full log. Now restart oscam and check the live log.. We need to see whats happening at startup..


    Which channels were you you trying in the log above, I`m assuming this was HBO ? Are all channels working now except HBO ?


    "not found" error usually means you don`t have the entitlements for that channel..


    Use the attached oscam.dvbapi so we can see which channels are being viewed in the log..

  • OK Boss thanks btw

    1: I think i'm clearing most of the other channels i usually get.
    2: Installed the dvbapi file
    3: Heres the log file........................i hope





    - - - Updated - - -


    Boss
    I don't know if this is a side issue or related, but when connecting or trying to connect to oscam when i eventually do the server is showing my 2 subs as online, but on my client and my other peers it's showing as zero cards avaliable.

  • This is the situation so far.
    1: Satsklep has never replied to my emails.
    2: Having real problems starting/restaring oscam, either by remote or telnet.
    3: Cannot connect with my client Solo4K it says " Zero cards NEEDINIT
    4: I don't know even if Satsklep has sent me the correct card, as I say they won't answer.
    5: I don't have a clue what the log file means.
    5: I'm fed up, i'm losing the will to live:dumb:


    regards: canthackit

  • what was the problem with it


    Cards need an extra time to clear added channels anything up to two weeks, if that don't happen as in my case,then Satsklep will send a new ota activation, along with a boosted signal to jump start the card.
    This worked for me now all channels are clearing fine.


    regards: canthackit

OSCam Support Forum

Configs, discussion, downloads and guides for OSCam Softcam.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!