There are 5 replies in this Thread which was already clicked 2,806 times. The last Post () by Daniel_GBG.
Hi there!
I have come so far that i have picture for 093e... then i change in config files to se 0b00...
Picture from both cards so it seems that cards/reader/oscam/client working but the
question is how should i config so user can see channels from both cards?
Using oscam 1.20 #6342 / 2 smargo for 093e and 0b00 / client is a Vu+solo vti image + mgcamd.
/Daniel
Cant get it to work :( Post my config files here.
Hope someone can help me out here.
Thanks!
/Daniel
in oscam web...
Hide 0x9e066a8 r 1 viasat ON OFF 127.0.0.1 0 mouse 18.02.12 17:49:36 00:01:04 093E:1388 Viasat: SVT 1 no data 00:00:04 CARDOK (84 entitlements)
Hide 0x9e07ed8 r 2 canal ON OFF 127.0.0.1 0 mouse 18.02.12 17:49:36 00:01:04 0000:0000 no data 00:01:04 CARDOK (11 entitlements)
Clients 1/1 (1 with ECM within last 15 seconds)
Hide Kill c 1 daniel ON ON 192.168.1.100 1666 newcamd (mgcamd) 18.02.12 17:49:51 00:00:49 093E:1388 Viasat: SVT 1 by viasat (461ms) 00:00:04 OK
Server (linux pc)
oscam conf:
[newcamd]
key = 0000000000000000000000000000
port = 12000@093e:000000;13000@0b00:FFFFFF
oscam server:
[reader]
label = viasat
protocol = mouse
device = /dev/ttyUSB0
caid = 093E
boxid =XXXXX
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,3,2
[reader]
label = canal
protocol = mouse
device = /dev/ttyUSB1
caid = 0B00
detect = cd
mhz = 357
cardmhz = 357
group = 2
emmcache = 1,3,2
oscam.user:
[account]
user = daniel
pwd = daniel
group = 1,2
uniq = 1
monlevel = 0
au = viasat
caid = 093E
ident = 093E:000000
and in my client Vu+solo + mgcamd
mg_cfg:
M: { 01 }
C: { 01 }
A: { 02 }
U: { 01 } 0x12c0
T: { 00 }
G: { 01 }
N: { 07 } 5 30
K: { 05 }
Q: { 600 }
P: { 00 }
O: { 00 } username password
S: { 03 } 80
L: { 00 }
E: { 15 }
H: { 07 }
R: { 00 }
D: { 00 }
B: { 00 }
F: { 01 }
newcamd.list:
CWS_KEEPALIVE = 300
CWS_INCOMING_PORT = 21000
CWS = 192.168.1.15 12000 daniel daniel 00 00 00 00 00 00 00 00 00 00 00 00 00 00 lan server1
You need to add another account in oscam and line to mgcamd for canal.
Setup account for viasat and canal like below;
oscam.user:
[account]
user = daniel
pwd = daniel
group = 1
uniq = 1
monlevel = 0
au = viasat
caid = 093E
ident = 093E:000000
[account]
user = daniel123
pwd = daniel123
group = 2
uniq = 1
monlevel = 0
au = canal
caid = 0B00Then in newcamd.list for mgcamd;
CWS = 192.168.1.15 12000 daniel daniel 00 00 00 00 00 00 00 00 00 00 00 00 00 00 lan server1
CWS = 192.168.1.15 13000 daniel123 daniel123 00 00 00 00 00 00 00 00 00 00 00 00 00 00 lan server1Let me know if this works buddy..
Almost there.... (i think)
Now i see in webgui that channel switch to 0b00 (canal+)... with the new user BUT no picture...
lots of
2012/02/18 18:54:50 B7207BD0 c daniel123 (0B00&FFFFFF/0A8E/56:5802): fake (0 ms) (0 of 0)
Hide 0xb7200750 r 1 viasat ON OFF 127.0.0.1 0 mouse 18.02.12 18:45:21 00:09:50 0000:0000 no data 00:00:27 CARDOK (84 entitlements)
Hide 0xb72020a8 r 2 canal ON OFF 127.0.0.1 0 mouse 18.02.12 18:45:21 00:09:50 0000:0000 no data 00:09:50 CARDOK (11 entitlements)
Clients 2/2 (1 with ECM within last 15 seconds)
Hide Kill c 1 daniel123 OFF ON 192.168.1.100 XXXX newcamd (mgcamd) 18.02.12 18:49:44 00:05:27 0B00:0A8E Canal+: SVT 1 by fake (0ms) 00:00:00 Duplicate
Hide Kill c 2 daniel ON ON 192.168.1.100 XXXX newcamd (mgcamd) 18.02.12 18:52:19 00:02:52 0000:0000 00:00:27 OK
The Picture have come to Sweden! :)
I missed in reader to have diffrents groups (1,2)
and i paste this under user (daniel123)
ident = 0B00:FFFFFF
dont know if i needed, but now i have picture on both local cards!
Thank you VERY,VERY much for your help/time/knowledge master G!!
The boxid in the post above wasnt mine.. just something i typed! :)
Don’t have an account yet? Register yourself now and be a part of our community!
