Boot problem !

Do you have the latest version?
1.1.7?

If so there's a new build on their forum.

You can check it on the development android topic.

It will help you

Dose it say on the wetek screen hold power button down ?

http://linuxsat-support.com/sh…te-not-booting-to-Enigma2 Read this thread, dual boot works fine for 90% or more of users however a small minority have the same problem as you. If you change hdmi or cec settings in android using 1.17 it can fail to boot sdcard. Even if I do not change anything in settings one of my Weteks will not boot an sdcard unless I install the old 1.16 bootloader, my second wetek works fine using the 1.17 bootloader. I have tried every build of 1.17 on my problem wetek and it still will not boot from sdcard unless I use the 1.16 loader

Which file are you using is it just the bootloader for 1.16 or the complete 1.16 android install. I used just the bootloader from here http://linuxsat-support.com/attachment.php?attachmentid=56862&d=1462647190 unzip file, open folder and select the bootloader you want then copy it to a fat 32 formatted card or usb and with card/usb inserted in Wetek boot into android. Once booted go to weupdate and set route to file on stick I ticked the 2 options to clear cache etc and then flashed the file. Alternatively download android 1.17 from wetek forum unzip and copy 4 files to fat 32 sdcard only, DO NOT use a usb stick if you decide to try this method , insert card and boot to recovery by pressing pin in reset button underneath wetek then clear cache etc and flash the new 1.17 os to Wetek. If your wetek is like one of mine the second method will work for a short time then fail again, it does not matter which file or update I use it will not stay working. The only fix for mine is flashing the 1.16 loader, bear in mind anytime you flash the nand on the wetek there is a small chance of bricking your box. Mine has been reflashed with every image available and has not bricked yet but better you know and appreciate it can go wrong

Are you asking how to install multiple urls for Iptv/ m3u lists or something else like individual addons.

Multiple instances of iptv simple client for example

I have it installed in Libreelec 7.02 running kodi 16.1, I use version 1,0,9 from the superrepo repository. If you google playlist loader kodi 16 the 4th result on page is a video which you can watch which is for helix version, just install from jarvis section instead of helix and reboot after installing repo from zip and reboot after installing playlist loader itself. If you do that you should have no problems it can be found under video addons once installed