having a bit off a problem when watching setanta ireland in my vu duo every now and again it starts to freezing for about a min r so my card speed is set to SMARTCARD CLOCK FREQUENCY: /dev/sci0 6800000 there are only a few people that have clines from my card is it possible to up the frequency to see if that helps r is that the highest speed the card can take thanks in advance lads
setanta ireland card
- tennents
- Thread is marked as Resolved.
-
-
Are you using oscam+cccam or just cccam alone ?
-
its one off your own backup images g using oscam 56677/cccam 2.13 what if i updated my bootloader and used one off the new back up images u have made thanks for replying mate
-
Remove this line
SMARTCARD CLOCK FREQUENCY: /dev/sci0 6800000
and any others referring to reader /dev/sci0 from your CCcam config so oscam reads it instead of CCcam.
The recommended speed for your card is 5mhz, oscam should set this itself, look at your oscam log on startup. -
For internal readers the highest possible clock rate will be auto detected by oscam, although differant versions of oscam will give differant ecm times.
Remove SMARTCARD CLOCK FREQUENCY: /dev/sci0 6800000, from CCcam.cfg as oscam is the cardreader.
If you had clock frequency in CCcam.cfg and oscam as cardreader you will have problems.
Let us know if this makes any differance buddy..
-
thanks ten and master g going to do that now
-
right lads a qiuck update i was ive down every thing that both ten and magster g said and im still getting the seem promblem only seems to happen on saturday when the three oclock kick off starts. 3 times it froze today again for at least three minutes and starts again hope i can get this sorted i dont download as my internet is only used for shareing
-
I take it you are sharing your card with 1 reshare? Any more than that then it would be asking for trouble. Depending on the size of the servers of the people you are sharing with, there could be a lot of people using your card anyhow, which would cause issues. Have you monitored your server during the 3pms to see how it is going? Maybe if you disable reshares maybe for one saturday at 3pm you might see a difference. I think the problems with Tring recently would mean more people are looking at alternatives.
-
is this were im going wrong look at my fline example F: jim 22/1/2011 0 0 0 { 0:0:1 } should there be a 1 t a 3 here 1 0 0 { 0:0:1 } as u can see i have 0 0 0 { 0:0:1 } allso why would my own box be freezing
-
Your fline is set to give only local without reshare, perhaps the number of clients is a problem. How many do you have connected?
-
about 11 ten mate im haveing no trouble with my ordinary sly shares
-
about 11 ten mate im haveing no trouble with my ordinary sly shares
So you have 2 sly cards running in oscam or is setanta on the same card ?
Can you post your oscam configs. -
ten mate i have 2 different severs one for my sly and one for my setanta i use my v+duo for my setanta as we all chipped in to buy the card im useing a backup imager that master g made i cant find the oscam configs mate
-
Ok i think its probably worth trying a later version of oscam, you will be able to install this from tspanel/linuxsat-support addons. Make sure you have your lines backed up as your current configs will be overwritten when you install the new version.
-
oscam cinfig looks like this
[global]
nice = -1
WaitForCards = 1
logfile = stdout
preferlocalcards = 1
saveinithistory = 1[webif]
httpport = 8888
httpuser = admin
httppwd = admin
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
# protocols[newcamd]
key = 0102030405060708091011121314
port = 10000@0963:000000;10001@0963:000000 -
Try using this campack & configs instead.
How to : Oscam Server or Cardreader with CCcam2.1.3 S*Y UK IPK
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!