Starting from a fresh install

**MR-T** · Sep 17th 2016

Hi Guys,

Having to start from the very beginning again as my server wouldn't let me log in so I have had to completely re-install Ubuntu 10.04.4 and I am sorry to be a pain to ask for this but I am at a loss now.

Can anyone help me as I have tried to follow the below tutorial but I cannot install the openssh then apt-get update fails too? I am tearing my hair out what's left of it anyway.

1. give your server a static ip. put this line in and press enter

nano /etc/network/interfaces

change the dhcp to static then under it put like this
address 192.168.1.78
netmask 255.255.255.0
broadcast 192.168.1.78
gateway 192.168.1.254

of course these are my ip's so please change to your own ip's

once done hold ctrl+x press y then enter
now to restart network put this line in

/etc/init.d/networking restart

you should now have static ip on your server

2. install SSh
apt-get install openssh-server

3. update sources list
apt-get update

4. install FTP server
apt-get install proftpd (standalone)

after this reboot server. once rebooted you can now log in on remote pc like laptop using putty and winscp u can also just use the server terminal but u need winscp to put files in directories

now download winSCP and Putty

winSCP download link here
http://winscp.net/eng/download.php

putty download link here
http://www.chiark.greenend.org.uk/~s.../download.html

5.now open putty and enter your servers ip then press enter
put your user then password then sudo -i then password and press enter
you are in terminal as root on remote computer u can also just use your server but i find using remote pc easier

now copy or add 1 by 1 these lines into terminal pressing enter after each one

mkdir /var/etc
mkdir /var/keys
mkdir /var/script
mkdir /var/config
mkdir /var/backup
mkdir /var/cccamlog
mkdir /var/www

chown (yourname) /var/etc
chown (yourname) /var/keys
chown (yourname) /var/script
chown (yourname) /var/config
chown (yourname) /var/backup
chown (yourname) /var/cccamlog
chown (yourname) /usr/local/bin
chown (yourname) /usr/local/etc
chown (yourname) /var/www

6. now put CCcam.x86 in usr/local/bin also put oscam in usr/local/bin use winscp to put the files in each directory. install winscp add a log in with username the one u made on install of ubuntu and password u made on install of ubuntu

chmod both files

chmod 755 /usr/local/bin/CCcam.x86
chmod 755 /usr/local/bin/oscam

7. put your oscam.conf oscam.server and oscam.user in /usr/local/etc

then put your cccam.cfg and provider and channel list in /var/etc

ok to get oscam to read your sky uk card you need to add this n line in your cccam.cfg file

N: yourserverip 10000 test1 test2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

8. now i will show you what to have in your oscam config files . keep in mind this is for sky uk and smargo reader . some lines will differ with different cards and readers
first file to make is oscam.conf paste this in the file and save

[global]
nice = -1
WaitForCards = 1
logfile = stdout
preferlocalcards = 1
saveinithistory = 1
disablelog = 1

[webif]
httpport = 8888
httpuser = admin
httppwd = admin
httpallowed = 0.0.0.0-255.255.255.255

protocols

[newcamd]
key = 0102030405060708091011121314
port = 10000@0963:000000

now make oscam.server paste this in and save file

[reader]
label = skyuk
protocol = smartreader
detect = cd
device = 004:002 ------ you will have to change this.goto part 11.
emmcache = 1,3,2
caid = 0963
boxid = xxxxxxxx ----- put your own boxkey inplace of the x's
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
blockemm-unknown = 1
mhz = 600
cardmhz = 600
ident = 0963:000000
group = 1

oscam.user paste this in and save file

[account]
user = test1
pwd = test2
monlevel = 0
uniq = 0
group = 1,2
au = skyuk
caid = 0963

9. so now you should have 3 files in usr/local/etc
oscam.conf
oscam.server
oscam.user

chmod 755 all 3
chmod 755 /usr/local/etc/oscam.conf
chmod 755 /usr/local/etc/oscam.server
chmod 755 /usr/local/etc/oscam.user

10.now we put script in for oscam and cccam to start on reboot or start up
in terminal as root put line
nano /etc/rc.local
under the word # by default put these 2 lines in
/usr/local/bin/oscam -b -c /usr/local/etc/ &
/usr/local/bin/CCcam.x86
ctrl+x then y and enter to save

11.now i need you to put right line in oscam.server
in terminal as root enter
lsusb
now you will see a few lines appear. u are only interested in the one that looks like this

Bus 004 device 002: ID 0403:6001 Future Technology devices internation, Ltd FT232 USB-Serial

this is the most important line forget the others. now if you open your oscam.server file you
you will see next to device this
device = 004:002 that is because u can see my bus is 004 and device is 002 in the line that we just got up with lsusb now edit it to what yours is and save your file. if u have put your box id in aswell that is oscam and cccam
configuered .

12. apt-get install apache2

13. apt-get install php5

14. make sure you have open both your cccam port and the oscam newcs port 10000 to your server. if u have just reboot your server and its ready to go.

15. to check goto your browdser and put in youyserverip:8888 user is admin password is admin it will show you your oscam webif

**codar** · Sep 18th 2016

10.04.4 is no longer supported I'm afraid and probably the reason why updates/openssh fails (end of life April 30th 2015)
You may have better luck in installing a newer release.
16.04.1 is out but you'll need to tweak a few things to get root access as it is disabled by default.
Login first with the details you used to install ubuntu, then:

Code

sudo passwd -u root
sudo passwd root
sudo -i
sed -i 's/prohibit-password/yes/' /etc/ssh/sshd_config
reboot

This should give you root access for winscp/putty.
Then try the rest of the tutorial to see if it works with the new release.
16.04.1 x64 is here:
releases.ubuntu.com/16.04.1/ubuntu-16.04.1-server-amd64.iso
16.04.1 x32 is here:
releases.ubuntu.com/16.04.1/ubuntu-16.04-server-i386.iso

**MR-T** · Sep 18th 2016

Hi Guys,

I have followed the tutorial and now got stuck at step 6. now put CCcam.x86 in usr/local/bin also put oscam in usr/local/bin use winscp to put the files in each directory. install winscp add a log in with username the one u made on install of ubuntu and password u made on install of Ubuntu. I cannot locate these files do I need to download these? Appreciate any help on being able to progress from here and also how to add the lines of the people sharing the card and where to put these?

Thanks in advance.

Tam

**codar** · Sep 18th 2016

Can you provide a link to the tutorial your following?
The binaries (oscam/cccam etc) may be attached to the tutorial, if on this site.

**MR-T** · Sep 19th 2016

Here is the link to the tutorial that I have been following

hopefully once I get past this I should be fine

**master G** · Sep 19th 2016

We can`t provide support for guides that are on another forum.. Its not possible to see the guide as a guest, you need to be a member..

Follow this if you want support -> Tutorial - Ubuntu Server 11.10, 12.xx, 13.04 x32/x64 - Auto Oscam/CCcam 2.1.3 Install

**MR-T** · Sep 19th 2016

I know you cannot provide support from another forum this is the tutorial that I have been following and now stuck on no 6 upwards sorry admin if this is not allowed and please remove

here i have wrote a how to install oscam and cccam on ubuntu with smargo reader. after a long time looking for a how to on this subject with no sucess
i finnally got it working perfect with a little help from serveral places.

first you want to install ubuntu . i use 10.04 but i think any version will work aslong as its the server edidtion.

aftere you have installed ubuntu logg into your server with the username you created during install
then enter your password
then to get as root we need to type sudo -i then press enter, it will asak for password enter password you use for your user

this is how you will always be able to logg in as root

now you are logged in as root.