Red card freezing

Hope someone out there can advise me ? running Ubuntu server latest edition with oscam r11273,i got a new red card couple of weeks ago the problem is that on sly sports it freezes every 2 mins I have put the config file from this forum below for the 0960 but it has made no difference to the freezing,how do I overclock the card so that its more stable also would I need too reboot the server when done or just save when inserted the details in oscam config,i used to have the 0963 card and it was great but that went tits up.

####oscam.conf####

[global]
nice = -1
logfile = /var/log/oscam.log
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
cachedelay = 120
bindwait = 120
resolvedelay = 30
serialreadertimeout = 1500
maxlogsize = 10
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
keepalive = 1

[dvbapi]
enabled = 1
user = linuxsatsupport
boxtype = dreambox
au = 1

[newcamd]
port = 10001@0960:000000
key = 0102030405060708091011121314
keepalive = 1

[cccam]
port = 12000
version = 2.1.3
build = 3165
reshare = 1

[webif]
httpport = 8888
httpuser =
httppwd =
httprefresh = 15
httpallowed = 192.168.0.0 - 255.255.255.255
debug = 255

[monitor]
appendchaninfo = 1

####oscam.dvbapi####

P: 0960:000000

####oscam.server####

[reader]
label = SKYUK
protocol = internal
device = /dev/sci0
caid = 0960
boxid =
cardmhz = 2700
mhz = 450
detect = cd
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-g = 1
saveemm-u = 1
saveemm-s = 1

####oscam.user####

[account]
user = linuxsatsupport
group = 1
caid = 0960
ident = 0960:000000
au = SKYUK

Thanks for reply master G using a red card,found this config for Ubuntu is this the files I need for ubunu and just change them accordingly

How-To] Oscam Configs For SLY UK CAID 0960 Red Card & Caid 0963
Started by*bigdes,*12-03-2016*20:48

Sorry its a smargo reader

Many thanks master G will give this a bash

- - - Updated - - -

Sorry too be a pain master G can I just go into oscam server and change the protocol=SmartReader and device=003:002 as I do not know the commands for putty this would make it a lot easier for me but the question is would it change back and also would I need to reboot server

many thanks once again for the help much appreciated

regards
MR-T

Quote from master G

Start telnet / putty
Type this and press enter

Code

lsusb

The output will look similiar to what i posted above. The bus / device will be different, so change the device to your own..
Just restart oscam, no need to restart the server..

Sorry master G but what is the command to actually change the device number on putty? I have done lsusb which brings up the buses/devices but I need to change Bus 002 to Device 002 from 001 which it is currently on just now.

If you can help me with the commands to change the device number on the buses that would be great.

Thanks in advance and sorry to be a pain but I am not very good with these things.

MR-T

Hi master G I think I got my wires crossed with the previous posts. When I type in lsusb on putty my Bus 002 Device 002: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC. I assume by the other posts I had to go into files then oscam server to update the protocol for the smart reader to show 002:002 then restart oscam? I have done this but just want to make sure this sounds right. Also is there another way to stop the channels freezing that the other users are encountering if what I have done is correct?

Thanks once again master G did what you suggested in the above post,made a slight difference so then I rebooted the router and changed the frequency in hub and it has not froze within the last 24hrs so heres hoping it stays like that.