sorry if wrong setion i have reflash and lost evething did have ocsm working with biss keys etc carnt seem get back forgot haow did again that long ago any help much appite
- - - Updated - - -
for solo4k cheers
OSCam with BISS keys on vuplus solo4k
- murgy
- Thread is marked as Resolved.
-
-
No need for oscam-emu.. Biss keys work in regular oscam or oscam ymod and a constant.cw file with valid keys.
Use this (rename softcam.key to constant.cw)-> SoftCam by Serjoga
Add this reader to oscam.server. Change /usr/keys/ to where you have the constant.cw file..
Code[reader] label = Myconstantcw protocol = constcw device = [COLOR='#FF0000']/usr/keys/[/COLOR]constant.cw group = 1Regular oscam for solo4k is here -> Latest OSCam For ARM Based Receivers
-
Display More
No need for oscam-emu.. Biss keys work in regular oscam or oscam ymod and a constant.cw file with valid keys.
Use this (rename softcam.key to constant.cw)-> SoftCam by Serjoga
Add this reader to oscam.server. Change /usr/keys/ to where you have the constant.cw file..
Code[reader] label = Myconstantcw protocol = constcw device = [COLOR='#FF0000']/usr/keys/[/COLOR]constant.cw group = 1Regular oscam for solo4k is here -> Latest OSCam For ARM Based Receivers
master g i want to add the biss reader to my solo4k ive been looking at this post, is this right how i have it,
[reader]
label = Myconstantcw ( do i leave that )
protocol = constcw
device = /usr/keys/constant.cw and /ect/tuxbox/configs/constant.cw
group = 1or would it be better to leave it /usr/keys, thats where my key file is for ncam.
-
You can edit the label to anything you want or leave it blank, it doesn`t affect how ncam works, it only identifies who, what that reader is.
Leave the device as it is /usr/keys. -
thanks master g i have now got
[reader]
label = biss
protocol = constcw
device = /usr/keys/constant.cw
group = 1i have also renamed serjoga key file to this constant.cw, i can clear some stuff on 3.0e is that the right format. i was not sure renaming the key file.
-
Renaming SOftCam.Key to constant.cw was the correct thing to do :welldone:
-
thank you master g just wasn't sure about renaming softcam, all good now.
- - - Updated - - -
master g the constant.cw in /user/keys what is the chomd for it 644 or 755.
-
644 for all softcam config files. It will still work if 755.
-
am useing 11041 verson oscam on solo4k
-
Hello, super-heroes of oscam,
I cannot make it work for biss. I have installed the IPK package, started it and it initializes OK. I have used the web-interface to configure it further and edit the configuration files.
It refuses to work.
LOG----------------------
vuplus: [VS1000]version=1.20-unstable_svn, build=11355, system=arm-linux-gnueabihf
vuplus: [LOG000]2017/03/17 19:12:12 00000000 s >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r11355 (arm-linux-gnueabihf)
vuplus: [LOG001]2017/03/17 19:12:12 00000000 s (main) System name = Linux
vuplus: [LOG002]2017/03/17 19:12:12 00000000 s (main) Host name = vuultimo4k
vuplus: [LOG003]2017/03/17 19:12:12 00000000 s (main) Release = 3.14.28-1.12
vuplus: [LOG004]2017/03/17 19:12:12 00000000 s (main) Version = #1 SMP Wed Nov 30 13:42:32 CET 2016
vuplus: [LOG005]2017/03/17 19:12:12 00000000 s (main) Machine = armv7l
vuplus: [LOG006]2017/03/17 19:12:12 00000000 s (main) Stb model = dm8000
vuplus: [LOG007]2017/03/17 19:12:12 00000000 s (main) Stb vumodel = vuultimo4k
vuplus: [LOG008]2017/03/17 19:12:12 00000000 s (main) Stb boxtype = vuultimo4k
vuplus: [LOG009]2017/03/17 19:12:12 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 9928
vuplus: [LOG010]2017/03/17 19:12:12 00000000 s (config) userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
vuplus: [LOG011]2017/03/17 19:12:12 00000000 s (main) signal handling initialized
vuplus: [LOG012]2017/03/17 19:12:12 00000000 s (config) 3 provid's loaded
vuplus: [LOG013]2017/03/17 19:12:12 00000000 s (config) 14 service-id's loaded in 0 ms
vuplus: [LOG014]2017/03/17 19:12:12 00000000 s (net) monitor: initialized (fd=8, port=9999, ip=192.168.1.80, prio=1)
vuplus: [LOG015]2017/03/17 19:12:12 00000000 s (net) newcamd: initialized (fd=9, port=10001, prio=1)
vuplus: [LOG016]2017/03/17 19:12:12 00000000 s (net) cccam: initialized (fd=10, port=12000, prio=1)
vuplus: [LOG017]2017/03/17 19:12:12 00000000 s (reader) first_internal_reader [internal] creating thread for device /dev/sci0
vuplus: [LOG018]2017/03/17 19:12:12 00000000 s (reader) second_internal_reader [internal] creating thread for device /dev/sci1
vuplus: [LOG019]2017/03/17 19:12:12 00000000 s (reader) biss_reader [constcw] creating thread for device /etc/tuxbox/config/constant.cw
vuplus: [LOG020]2017/03/17 19:12:12 10A6CFF5 r (reader) first_internal_reader [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
vuplus: [LOG021]2017/03/17 19:12:12 10A6CFF5 r (reader) first_internal_reader [internal] Reader sci internal, detected box type: vuultimo4k
vuplus: [LOG022]2017/03/17 19:12:12 00000000 s (anticasc) anti cascading disabled
vuplus: [LOG023]2017/03/17 19:12:12 76B28848 r (reader) second_internal_reader [internal] Reader initialized (device=/dev/sci1, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
vuplus: [LOG024]2017/03/17 19:12:12 76B28848 r (reader) second_internal_reader [internal] Reader sci internal, detected box type: vuultimo4k
vuplus: [LOG025]2017/03/17 19:12:12 471E13A2 p (constcw) Local reader: biss_reader (file: /etc/tuxbox/config/constant.cw)
vuplus: [LOG026]2017/03/17 19:12:12 316E213F c (client) plain dvbapi-client granted (linux, au=off)
vuplus: [LOG027]2017/03/17 19:12:12 471E13A2 p (reader) biss_reader [constcw] proxy initialized, server /etc/tuxbox/config/constant.cw:0
vuplus: [LOG028]2017/03/17 19:12:12 316E213F c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam.ccache
vuplus: [LOG029]2017/03/17 19:12:12 316E213F c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)
vuplus: [LOG030]2017/03/17 19:12:12 07082B30 h (webif) webif: decompressed 202576 bytes back into 432920 bytes
vuplus: [LOG031]2017/03/17 19:12:12 07082B30 h (webif) HTTP Server running. ip=0.0.0.0 port=8888
vuplus: [LOG032]2017/03/17 19:12:16 316E213F c (dvbapi) Demuxer 0 found 0 ECMpids and 2 STREAMpids in caPMT
vuplus: [LOG033]2017/03/17 19:12:16 316E213F c (dvbapi) Demuxer 0 found 0 ECMpids and 2 STREAMpids in PMT
vuplus: [LOG034]2017/03/17 19:33:25 6E6B82A0 m (client) plain monitor-client 192.168.1.10 granted (usermonitor, lvl=4)
vuplus: [LOG035]2017/03/17 19:42:23 316E213F c (dvbapi) Demuxer 0 stop descrambling program number 19A0 (FFFE@FFFFFE:19A0 unknown)
vuplus: [LOG036]2017/03/17 19:42:23 316E213F c (dvbapi) Demuxer 0 ecmpid 0 CAID: 2600 ECM_PID: 1FFF PROVID: 000000
vuplus: [LOG037]2017/03/17 19:42:23 316E213F c (dvbapi) Demuxer 0 found 1 ECMpids and 2 STREAMpids in caPMT
vuplus: [LOG038]2017/03/17 19:42:23 316E213F c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 2600 PROVID 000000 ECMPID 1FFF ANY CHID PMTPID 17ED VPID 17EE
vuplus: [LOG039]2017/03/17 19:42:23 471E13A2 p (constcw) Searching CW for CAID 2600 PROVID 000000 SRVID 17ED ECMPID 1FFF PMTPID 17ED VPID 17EE
vuplus: [LOG040]2017/03/17 19:42:23 316E213F c (ecm) linux (2600@000000/0000/17ED/09:A3134EBC09B575BA4E7B3BF5C55FC019): rejected reader sid (1 ms) by biss_reader - 1+1 International
vuplus: [LOG041]2017/03/17 19:42:23 316E213F c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 0 disabled ecmpids!
vuplus: [LOG042]2017/03/17 19:42:23 316E213F c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 2600 PROVID 000000 ECMPID 1FFF ANY CHID PMTPID 17ED VPID 17EE
vuplus: [LOG043]2017/03/17 19:42:23 316E213F c (ecm) linux (2600@000000/0000/17ED/09:A3134EBC09B575BA4E7B3BF5C55FC019): rejected reader sid (1 ms) by biss_reader - 1+1 International
vuplus: [LOG044]2017/03/17 19:42:23 316E213F c (dvbapi) Demuxer 0 found 1 ECMpids and 2 STREAMpids in PMT
vuplus: [LOG045]2017/03/17 19:42:23 316E213F c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 0 disabled ecmpids!
vuplus: [LOG046]2017/03/17 19:42:23 316E213F c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 2600 PROVID 000000 ECMPID 1FFF ANY CHID PMTPID 17ED VPID 17EE
vuplus: [LOG047]2017/03/17 19:42:23 316E213F c (ecm) linux (2600@000000/0000/17ED/09:A3134EBC09B575BA4E7B3BF5C55FC019): rejected reader sid (24 ms) by biss_reader - 1+1 International
vuplus: [LOG048]2017/03/17 19:42:24 316E213F c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 0 disabled ecmpids!
vuplus: [LOG049]2017/03/17 19:42:24 316E213F c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 2600 PROVID 000000 ECMPID 1FFF ANY CHID PMTPID 17ED VPID 17EE
vuplus: [LOG050]2017/03/17 19:42:24 316E213F c (ecm) linux (2600@000000/0000/17ED/09:A3134EBC09B575BA4E7B3BF5C55FC019): rejected reader sid (1 ms) by biss_reader - 1+1 International
-----------------------------------
reader in oscam.server:[reader]
label = biss_reader
description = reader for biss via webif
protocol = constcw
device = /etc/tuxbox/config/constant.cw
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000000;1010:000000
group = 1
enable = 1
-----------------------------------------------What could be wrong? Or maybe there is some detailed howto manual on how biss should be configured in order to work, please?
Thank you -
Try with NCam instead.
Don`t create a reader as ncam will do this itself.
Rename constant.cw to SoftCam.Key
Use the same oscam configs. Just rename oscam.conf to ncam.conf, oscam.server to ncam.server and so on.
Configs are included in the linked ipk - > NCam CardReader Arm Vu+ solo 4k for various images
Add SoftCam.Key to the same location as the rest of your configs.
Just curious, which image are you using ?
OSCam-EMU Support Forum
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!
