i cant get these keys to clear using my oscam config but the clear using mgcamd can anyone help ?
Serjoga keys- cant get these keys to clear using my oscam config
- mrbirdseye
- Thread is marked as Resolved.
There are 4 replies in this Thread which was already clicked 2,857 times. The last Post () by mrbirdseye.
-
-
You need to be using oscam-emu with SoftCam.Keys. No reader is required as oscam-emu creates one itself..
If using regular oscam rename SoftCam.Keys to constant.cw and add this reader to oscam.server (change /etc/tuxbox/config/ to where you have the constant.cw):
Code[reader] label = constant.cw protocol = constcw device = [COLOR='#FF0000']/etc/tuxbox/config/[/COLOR]constant.cw caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1 detect = cd ident = 0D00:000000,000004,000010,000014,000020,0000C0,000 0C4,0000C8 ,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;09 0F:000000; 0500:000000,030B00,023800,021110,007400,007800;180 1:000000,0 07301,001101;0604:000000;2600:000000;FFFF:000000;0 E00:000000 ;4AE1:000000 group = 1
-
[MENTION=3]master G[/MENTION] Hi.I use oscam emu. I have a problem with CW keys .I use SoftCam by Serjoga.
Example:
F 3EE61966 00 F0xxxxxxxxxxxxxx59 ;Fightbox HD (42.0°E)
F 3EE61966 01 F0xxxxxxxxxxxxxx59 ;Fightbox HD (42.0°E)
F 3EEA196A 00 C1xxxxxxxxxxxxxx6F ;DaVinci Learning (42.0°E)
F 3EEA196A 01 C1xxxxxxxxxxxxxx6F ;DaVinci Learning (42.0°E)They work with Mgcamd.With oscam don't work.
I use openATV 5.3 (oscam path is usr/keys)
My oscam conf:
##########################
###LINUXSAT-SUPPORT.COM###
##########################[global]
logfile = /dev/tty
clienttimeout = 4000
clientmaxidle = 300
netprio = 1
nice = -1
maxlogsize = 1000
waitforcards = 0
preferlocalcards = 1
dropdups = 1[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
request_mode = 1
user = linuxsatsupport
read_sdt = 1
write_sdt_prov = 1
boxtype = dreambox
extended_cw_api = 1[streamrelay]
stream_relay_enabled = 0[webif]
httpport = 8888
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 127.0.0.1,192.1.0.0-192.168.255.255
http_status_log = 1[newcamd]
port = 10001@
key = 0102030405060708091011121314
mgclient = 1
keepalive = 1[cccam]
port = 12000
version = 2.1.3
build = 3165
reshare = 1oscam server
[reader]
label = cccam_server1
enable = 1
protocol = cccam
device = 192.168.0.254,12345
user = a66
password = b66
inactivitytimeout = 20
reconnecttimeout = 15
group = 1
cccversion = 2.2.1
cccmaxhops = 2
ccckeepalive = 1
audisabled = 1[reader]
label = cccam_server2
enable = 1
protocol = cccam
device = 8.8.8.8,12335
user = a66qq
password = b6qqqq6
inactivitytimeout = 20
reconnecttimeout = 15
group = 1
cccversion = 2.1.1
cccmaxhops = 3
ccckeepalive = 1
audisabled = 1[reader]
label = Tvsat
enable = 1
protocol = internal
Detect = CD
emmcache = 1,2,2
device = /dev/sci0
group = 2
caid = 0183D
ident = 0183D:000000,005411
rsakey =
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
blockemm-unknown = 1oscam user
[account]
description = dvbapi
user = linuxsatsupport
group = 1,2I repeat all emu are ok.(swiss,bulsat,polaris ,powerVu and Biss keys)Just CW keys.Hw can i fix it?THX in advance.
-
[reader]
label = biss
protocol = constcw
device = /usr/keys/constant.cw
caid = 06ad,2600
group = 1add the caid and you may get what you want
they work with cccam too
STATIC CW FILE : /var/keys/constant.cw
-
im using oscam emu but i can only get a few of the keys to work 39e is fine but 15w espn will only open with mgcand
oscam tries to open it but there is no picture ?- - - Updated - - -
it only seems to be the biss keys that dont open ?
Softcam Keys Support Forum
Configs, Downloads, Tools, Biss Feed Keys, Regular Feed Keys, Softcam Keys, Encrypted Feeds, Feed Hunter, Biss & Powervu Encrypted Feeds.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!