lost all sky movie channels and sky sports 1 dreamelite image dm800se

There are 18 replies in this Thread which was already clicked 3,201 times. The last Post () by codar.

    thanks codar dm800hdse running dreamelite image using cccam 230 white 0963 caid.Master G kindly posted the oscam and configs but i cant seem to get them installed so i installed another version and used the configs and i think ive messed up because thats when the sports channels stopped .thanks

    Are any other channels clearing?
    If so, you may need to re-pair your card to the original receiver again (or any other sd receiver)
    Don't pair it to a hd receiver as white card needs to be paired to a sd receiver for it to work with premium content (unlike red 0960 card)
    If nothing is clearing, you may have a problem with your configs.
    A screenshot of oscam live log while selecting channels will tell a lot.

    Quote from codar

    Are any other channels clearing?
    If so, you may need to re-pair your card to the original receiver again (or any other sd receiver)
    Don't pair it to a hd receiver as white card needs to be paired to a sd receiver for it to work with premium content (unlike red 0960 card)
    If nothing is clearing, you may have a problem with your configs.
    A screenshot of oscam live log while selecting channels will tell a lot.


    thanks codar i think i am getting somewhere now i ive found oscam for my image on tspanel got it installed and put configs in checked it out in dcc telnet and says thier is a problem with decoder or reader.i cant repair as i have a hd box maybe have to get a sd one and phone them.yes some channels are still clearing just movies and sports channels dont.i will update how i get on thanks again

    Hi scooby
    i had the same issue and i did end up re pairing it to my sd box and all is well everything back on,
    I did this by going online, never had to phone
    just be aware if its an old sd box you may have to add an xtra 0 at the beginning of your box serial


    now i just need to get oscam on my dm800hd not sure if its a geniune one or not, the image is 133 blackhole from memory


    I did try the one Master g put up but it says its the wrong version when i try to install it,


    if anyone knows of a cam which will install please let me know or maybe i need to update the image any advice one this is welcome.


    Just another note if anyone gets channel freezing for a few seconds then clears when usng cccam 2.1.3 it maybe worth trying oscam this s curred by problem i have had for 2 years


    Hi supra thanks for that mate.i still cant get oscam to work i even installed a newer dreamelite image.but oscam is the way to go and get rid of ccam.i got oscam installed from tspanel 7.5 which you can download and try but as i said oscam is not working. going to post my log and configs to see if someone can have a look.


    - - - Updated - - -


    still cant get oscam to work despite trying all sorts of configs can someone have.a look at.my log and configs.thanks


    oscam conf


    oscam server



    oscam user

    Code
    [account]
user = localuser
group = 1
au = skyuk

    Hi Scooby


    im new to oscam also but you have a line in your log which i did before i re paired the card to a sd box if you have not done that im pretty sure that will be the problem the line i mean is as follows


    (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!


    im sure some one with better knowledge than me will help if im wrong


    good luck


    thanks supra if i need to get a sd box i take it as long as the box has not got a hdmi port then it will do?.

    • Official Post
    Quote from scooby9858

    Hi supra thanks for that mate.i still cant get oscam to work i even installed a newer dreamelite image.but oscam is the way to go and get rid of ccam.i got oscam installed from tspanel 7.5 which you can download and try but as i said oscam is not working. going to post my log and configs to see if someone can have a look.


    Use the attached configs. Don`t alter them in any way (don`t need boxid for 0963).. Now show us the oscam log from startup and after viewing some channels..

    Quote from master G

    Use the attached configs. Don`t alter them in any way (don`t need boxid for 0963).. Now show us the oscam log from startup and after viewing some channels..


    thanks Master G i will get the oscam log posted soon thanks again

    had a bit of a hicup had to install the image again and then it wouldnt accept oscam.got it installed now.and here is the log with
    the files you gave me Master G.i got my brothers sd sky box that he only has bt sports on[the card that i used for both of us to watch my card had the rest which he could watch]and can confirm bt sports is working in his box and this is the log from oscam.thanks


    2016/11/19 00:33:38 00000000 s (main) System name = Linux
    2016/11/19 00:33:38 00000000 s (main) Host name = dm800se
    2016/11/19 00:33:38 00000000 s (main) Release = 3.2-dm800se
    2016/11/19 00:33:38 00000000 s (main) Version = #1 SMP Sat Nov 5 16:51:00 CET 2016
    2016/11/19 00:33:38 00000000 s (main) Machine = mips
    2016/11/19 00:33:38 00000000 s (main) Stb model = dm800se
    2016/11/19 00:33:38 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 31365
    2016/11/19 00:33:38 00000000 s (main) signal handling initialized
    2016/11/19 00:33:38 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
    2016/11/19 00:33:38 00000000 s (main) waiting for local card init
    2016/11/19 00:33:38 53025652 h (webif) webif: decompressed 167198 bytes back into 408136 bytes
    2016/11/19 00:33:38 53025652 h (webif) HTTP Server running. ip=0.0.0.0 port=8888
    2016/11/19 00:33:38 00000000 s (main) init for all local cards done
    2016/11/19 00:33:38 00000000 s (emmcache) loading emmcache disabled since no reader is using it!
    2016/11/19 00:33:38 00000000 s (emmcache) loading emmstats disabled since no reader is using it!
    2016/11/19 00:33:38 00000000 s (anticasc) anti cascading disabled
    2016/11/19 00:33:38 158F4D75 c (client) plain dvbapi-client granted (anonymous, au=off)
    2016/11/19 00:33:38 158F4D75 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 0 maximum amount of possible filters is 32 (oscam limit is 32)
    2016/11/19 00:33:38 158F4D75 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0963 ECM_PID: 0508 PROVID: 000000
    2016/11/19 00:33:38 158F4D75 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 0961 ECM_PID: 0508 PROVID: 000000
    2016/11/19 00:33:38 158F4D75 c (dvbapi) Demuxer 0 ecmpid 2 CAID: 0960 ECM_PID: 0508 PROVID: 000000
    2016/11/19 00:33:38 158F4D75 c (dvbapi) Demuxer 0 found 3 ECMpids and 5 STREAMpids in caPMT
    2016/11/19 00:33:38 158F4D75 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
    2016/11/19 00:33:38 158F4D75 c (dvbapi) Demuxer 0 found 3 ECMpids and 5 STREAMpids in PMT
    2016/11/19 00:33:42 158F4D75 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
    2016/11/19 00:34:13 158F4D75 c (-) -- Skipped 6 duplicated log lines --
    2016/11/19 00:34:13 158F4D75 c (dvbapi) Demuxer 0 stop descrambling program number D020 (0963@000000:D020 unknown)
    2016/11/19 00:34:14 158F4D75 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0963 ECM_PID: 0501 PROVID: 000000
    2016/11/19 00:34:14 158F4D75 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 0961 ECM_PID: 0501 PROVID: 000000
    2016/11/19 00:34:14 158F4D75 c (dvbapi) Demuxer 0 ecmpid 2 CAID: 0960 ECM_PID: 0501 PROVID: 000000
    2016/11/19 00:34:14 158F4D75 c (dvbapi) Demuxer 0 found 3 ECMpids and 5 STREAMpids in caPMT
    2016/11/19 00:34:14 158F4D75 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
    2016/11/19 00:34:14 158F4D75 c (dvbapi) Demuxer 0 found 3 ECMpids and 5 STREAMpids in PMT
    2016/11/19 00:34:18 158F4D75 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
    2016/11/19 00:34:23 158F4D75 c (-) -- Skipped 1 duplicated log lines --
    2016/11/19 00:34:23 158F4D75 c (dvbapi) Demuxer 0 stop descrambling program number D7D2 (0963@000000:D7D2 unknown)
    2016/11/19 00:34:24 158F4D75 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0963 ECM_PID: 0508 PROVID: 000000
    2016/11/19 00:34:24 158F4D75 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 0961 ECM_PID: 0508 PROVID: 000000
    2016/11/19 00:34:24 158F4D75 c (dvbapi) Demuxer 0 ecmpid 2 CAID: 0960 ECM_PID: 0508 PROVID: 000000
    2016/11/19 00:34:24 158F4D75 c (dvbapi) Demuxer 0 found 3 ECMpids and 5 STREAMpids in caPMT
    2016/11/19 00:34:24 158F4D75 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
    2016/11/19 00:34:25 158F4D75 c (dvbapi) Demuxer 0 found 3 ECMpids and 5 STREAMpids in PMT
    2016/11/19 00:34:29 158F4D75 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
    2016/11/19 00:34:45 158F4D75 c (-) -- Skipped 3 duplicated log lines --
    2016/11/19 00:34:45 158F4D75 c (dvbapi) Demuxer 0 stop descrambling program number D021 (0963@000000:D021 unknown)
    2016/11/19 00:34:46 158F4D75 c (dvbapi) Demuxer 0 found 0 ECMpids and 13 STREAMpids in caPMT
    2016/11/19 00:34:46 158F4D75 c (dvbapi) Demuxer 0 found 0 ECMpids and 13 STREAMpids in PMT
    2016/11/19 00:34:56 158F4D75 c (dvbapi) Demuxer 0 stop descrambling program number 178A (FFFE@FFFFFE:178A unknown)
    2016/11/19 00:34:56 158F4D75 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0963 ECM_PID: 0508 PROVID: 000000
    2016/11/19 00:34:56 158F4D75 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 0961 ECM_PID: 0508 PROVID: 000000
    2016/11/19 00:34:56 158F4D75 c (dvbapi) Demuxer 0 ecmpid 2 CAID: 0960 ECM_PID: 0508 PROVID: 000000
    2016/11/19 00:34:56 158F4D75 c (dvbapi) Demuxer 0 found 3 ECMpids and 5 STREAMpids in caPMT
    2016/11/19 00:34:56 158F4D75 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
    2016/11/19 00:34:56 158F4D75 c (dvbapi) Demuxer 0 found 3 ECMpids and 5 STREAMpids in PMT
    2016/11/19 00:35:00 158F4D75 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matchin


    - - - Updated - - -


    managed to get oscam working and all channels are working using these configs with dreamelite image.not my work thanks goes to the person who made them. dont know if the card will update yet.also how do i get my brother back on hes on cccam with cline dyndns. thanks


    oscam.conf


    [global]
    nice = -1
    WaitForCards = 1
    logfile = stdout
    maxlogsize = 10 # Logfile reaches to 10 KBytes
    preferlocalcards = 1
    saveinithistory = 1


    [monitor]
    port = 988
    monlevel = 4
    nocrypt = 127.0.0.1


    [webif]
    httpport = 9999
    httpuser = root
    httppwd = password
    httpallowed = 192.168.0.1-192.168.0.253,127.0.0.1


    # protocols


    [dvbapi]
    enabled = 1
    user = dvbapiuser
    ignore =
    priority =
    au = 1
    pmt_mode =
    request_mode =
    boxtype = dreambox


    [cccam]
    port = 12000
    version = 2.1.3
    build =
    reshare = 1
    reshare_mode =
    ignorereshare =
    minimizecards =
    stealth = 1
    updateinterval =
    keepconnected = 1



    oscam.server


    [reader]
    label = slot1
    enable = 1
    protocol = internal
    device = /dev/sci0
    boxid = 12345678
    blockemm-u = 0
    blockemm-s = 0
    blockemm-g = 1
    blockemm-unknown = 1
    emmcache = 1,3,2
    group = 1
    caid = 0963
    lb_weight=100


    [reader]
    label=user1 C line
    enable=1
    protocol=cccam
    device=user1clienaddress,14000
    user=username
    password=password
    group=1
    inactivitytimeout=1
    reconnecttimeout=2
    lb_weight=100
    cccversion=2.1.4
    cccmaxhops=10
    cccwantemu=1
    ccckeepalive=1


    oscam.user


    [account]
    user = dvbapiuser
    pwd = password
    group = 1
    au = slot1


    [account]
    user=user1
    pwd=pass1
    group=1
    cccmaxhops=5
    cccreshare=1


    [account]
    user=user2
    pwd=pass2
    group=1
    cccmaxhops=5
    cccreshare=0

    still cant get oscam to share ive changed configs changed version of oscam and every time i can clear the card in the dm800se but i cant share the card.it must be something i am doing wrong in the log you see meter trying to connect that is the room upstairs ive taken that user out of oscam user and it still shows in livelog so dont know whats going on thanks for any help.


    OSCam: 1.20-unstable_svn Build: r11226
    2016/11/22 18:07:46 00000000 s (main) System name = Linux
    2016/11/22 18:07:46 00000000 s (main) Host name = dm800se
    2016/11/22 18:07:46 00000000 s (main) Release = 3.2-dm800se
    2016/11/22 18:07:46 00000000 s (main) Version = #1 SMP Sat Nov 5 16:51:00 CET 2016
    2016/11/22 18:07:46 00000000 s (main) Machine = mips
    2016/11/22 18:07:46 00000000 s (main) Stb model = dm800se
    2016/11/22 18:07:46 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 20656
    2016/11/22 18:07:46 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
    2016/11/22 18:07:46 00000000 s (main) signal handling initialized
    2016/11/22 18:07:46 00000000 s (net) cccam: initialized (fd=4, port=12000, ip=192.168.1.67)
    2016/11/22 18:07:46 00000000 s (reader) Reader-0 [internal] creating thread for device /dev/sci0
    2016/11/22 18:07:46 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
    2016/11/22 18:07:46 00000000 s (main) waiting for local card init
    2016/11/22 18:07:46 47FBFD24 r (reader) Reader-0 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
    2016/11/22 18:07:46 47FBFD24 r (reader) Reader-0 [internal] Reader sci internal, detected box type: dm800se
    2016/11/22 18:07:46 47FBFD24 r (reader) Reader-0 [internal] card detected
    2016/11/22 18:07:47 61DDB4E1 h (webif) webif: decompressed 161493 bytes back into 393312 bytes
    2016/11/22 18:07:47 61DDB4E1 h (webif) HTTP Server running. ip=0.0.0.0 port=8888
    2016/11/22 18:07:48 47FBFD24 r (reader) Reader-0 [internal] ATR: 3F FD 13 25 02 50 00 0F 33 B0 0F 69 FF 4A 50 D0 00 00 53 59 02
    2016/11/22 18:07:48 47FBFD24 r (reader) Reader-0 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
    2016/11/22 18:07:48 47FBFD24 r (reader) Reader-0 [internal] Calculated work ETU is 20.67 us reader mhz = 450
    2016/11/22 18:07:48 47FBFD24 r (reader) Reader-0 [internal] Buffers readed 0 bytes total time_us 75203
    2016/11/22 18:07:49 47FBFD24 r (reader) Reader-0 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
    2016/11/22 18:07:50 47FBFD24 r (reader) Reader-0 [internal] Card type: SYAV
    2016/11/22 18:07:50 47FBFD24 r (reader) Reader-0 [internal] Rom version: 40LF
    2016/11/22 18:07:50 47FBFD24 r (reader) Reader-0 [internal] Credit available on card: 35 euro
    2016/11/22 18:07:50 47FBFD24 r (reader) Reader-0 [internal] FuseByte: 25
    2016/11/22 18:07:50 47FBFD24 r (reader) Reader-0 [internal] Region Code: G53
    2016/11/22 18:07:50 47FBFD24 r (reader) Reader-0 [internal] Country Code: GBR
    2016/11/22 18:07:50 47FBFD24 r (reader) Reader-0 [internal] classD1 ins742A: failed
    2016/11/22 18:07:50 47FBFD24 r (reader) Reader-0 [internal] Pincode read: 3470
    2016/11/22 18:07:50 47FBFD24 r (reader) Reader-0 [internal] PCB settings: 3F 0 E 0
    2016/11/22 18:07:50 47FBFD24 r (reader) Reader-0 [internal] type: VideoGuard BSkyB (0963), caid: 0963
    2016/11/22 18:07:50 47FBFD24 r (reader) Reader-0 [internal] serial: ########, BoxID: ########, baseyear: 1997
    2016/11/22 18:07:50 47FBFD24 r (reader) Reader-0 [internal] ready for requests
    2016/11/22 18:07:50 47FBFD24 r (reader) Reader-0 [internal] found card system videoguard2
    2016/11/22 18:07:50 47FBFD24 r (reader) Reader-0 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
    2016/11/22 18:07:50 47FBFD24 r (reader) Reader-0 [videoguard2] card detected
    2016/11/22 18:07:50 47FBFD24 r (reader) Reader-0 [videoguard2] type: VideoGuard BSkyB (0963)
    2016/11/22 18:07:50 47FBFD24 r (reader) Reader-0 [videoguard2] ------------------------------------------------------------------
    2016/11/22 18:07:50 47FBFD24 r (reader) Reader-0 [videoguard2] |- class -|-- tier --|----- valid to ------|--- package name ----|
    2016/11/22 18:07:50 47FBFD24 r (reader) Reader-0 [videoguard2] +---------+----------+---------------------+---------------------+
    2016/11/22 18:07:50 47FBFD24 r (reader) Reader-0 [videoguard2] |-- 00 ---|-- 0003 --| 2017/01/14-00:00:00 |
    2016/11/22 18:07:50 47FBFD24 r (reader) Reader-0 [videoguard2] |-- 00 ---|-- 000b --| 2017/01/14-00:00:00 |
    2016/11/22 18:07:50 47FBFD24 r (reader) Reader-0 [videoguard2] |-- 00 ---|-- 0010 --| 2017/01/14-00:00:00 |
    2016/11/22 18:07:50 47FBFD24 r (reader) Reader-0 [videoguard2] |-- 00 ---|-- 001d --| 2017/01/14-00:00:00 |
    2016/11/22 18:07:50 47FBFD24 r (reader) Reader-0 [videoguard2] |-- 00 ---|-- 0079 --| 2017/01/14-00:00:00 |
    2016/11/22 18:07:50 47FBFD24 r (reader) Reader-0 [videoguard2] |-- 05 ---|-- 05e1 --| 2017/01/02-00:01:32 |
    2016/11/22 18:07:50 47FBFD24 r (reader) Reader-0 [videoguard2] |-- 05 ---|-- 05e2 --| 2017/01/02-00:01:32 |
    2016/11/22 18:07:50 47FBFD24 r (reader) Reader-0 [videoguard2] |-- 05 ---|-- 05e3 --| 2017/01/02-00:01:32 |
    2016/11/22 18:07:50 47FBFD24 r (reader) Reader-0 [videoguard2] |-- 05 ---|-- 05e4 --| 2017/01/02-00:01:32 |
    2016/11/22 18:07:50 47FBFD24 r (reader) Reader-0 [videoguard2] |-- 05 ---|-- 05e5 --| 2017/01/02-00:01:32 |
    2016/11/22 18:07:50 47FBFD24 r (reader) Reader-0 [videoguard2] |-- 0d ---|-- 0d32 --| 2017/01/02-00:05:46 |
    2016/11/22 18:07:50 47FBFD24 r (reader) Reader-0 [videoguard2] |-- 0d ---|-- 0d36 --| 2017/01/02-00:05:46 |
    2016/11/22 18:07:50 47FBFD24 r (reader) Reader-0 [videoguard2] |-- 0d ---|-- 0d65 --| 2017/01/02-00:05:46 |
    2016/11/22 18:07:50 47FBFD24 r (reader) Reader-0 [videoguard2] |-- 0d ---|-- 0d66 --| 2017/01/02-00:05:46 |
    2016/11/22 18:07:50 47FBFD24 r (reader) Reader-0 [videoguard2] |-- 0d ---|-- 0d72 --| 2017/01/02-00:05:46 |
    2016/11/22 18:07:50 47FBFD24 r (reader) Reader-0 [videoguard2] |-- 0d ---|-- 0d73 --| 2017/01/02-00:05:46 |
    2016/11/22 18:07:50 47FBFD24 r (reader) Reader-0 [videoguard2] |-- 0e ---|-- 0e48 --| 2016/12/28-00:05:48 |
    2016/11/22 18:07:50 47FBFD24 r (reader) Reader-0 [videoguard2] |-- 0e ---|-- 0e46 --| 2016/12/28-00:05:48 |
    2016/11/22 18:07:50 47FBFD24 r (reader) Reader-0 [videoguard2] |-- 0e ---|-- 0e60 --| 2016/12/28-00:05:48 |
    2016/11/22 18:07:50 47FBFD24 r (reader) Reader-0 [videoguard2] |-- 0e ---|-- 0ed2 --| 2016/12/28-00:05:48 |
    2016/11/22 18:07:50 47FBFD24 r (reader) Reader-0 [videoguard2] |-- 0f ---|-- 0f68 --| 2016/12/28-00:05:50 |
    2016/11/22 18:07:50 47FBFD24 r (reader) Reader-0 [videoguard2] |-- 0f ---|-- 0ffb --| 2016/12/28-00:05:50 |
    2016/11/22 18:07:50 47FBFD24 r (reader) Reader-0 [videoguard2] ------------------------------------------------------from-ins70--
    2016/11/22 18:07:51 00000000 s (main) init for all local cards done
    2016/11/22 18:07:51 00000000 s (emmcache) loading emmcache disabled since no reader is using it!
    2016/11/22 18:07:51 00000000 s (emmcache) loading emmstats disabled since no reader is using it!
    2016/11/22 18:07:51 00000000 s (anticasc) anti cascading disabled
    2016/11/22 18:07:51 6FD1033B c (client) plain dvbapi-client granted (anonymous, au=off)
    2016/11/22 18:07:51 6FD1033B c (dvbapi) dvbapi channelcache loaded from /var/keys/oscam.ccache
    2016/11/22 18:07:51 6FD1033B c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 0 maximum amount of possible filters is 32 (oscam limit is 32)
    2016/11/22 18:07:51 6FD1033B c (dvbapi) Demuxer 0 found 0 ECMpids and 10 STREAMpids in caPMT
    2016/11/22 18:07:51 6FD1033B c (dvbapi) Demuxer 0 found 0 ECMpids and 10 STREAMpids in PMT
    2016/11/22 18:07:52 36653B31 c (client) encrypted cccam-client 192.168.1.70 rejected (invalid access)
    2016/11/22 18:07:52 36653B31 c (cccam) account 'meter' not found!
    2016/11/22 18:07:52 36653B31 c (client) anonymous disconnected from 192.168.1.70
    2016/11/22 18:08:03 2C260FC7 c (client) encrypted cccam-client 192.168.1.70 rejected (invalid access)
    2016/11/22 18:08:03 2C260FC7 c (cccam) account 'meter' not found!
    2016/11/22 18:08:03 2C260FC7 c (client) anonymous disconnected from 192.168.1.70
    2016/11/22 18:08:15 308F033A c (client) encrypted cccam-client 192.168.1.70 rejected (invalid access)
    2016/11/22 18:08:15 308F033A c (cccam) account 'meter' not found!
    2016/11/22 18:08:15 308F033A c (client) anonymous disconnected from 192.168.1.70
    2016/11/22 18:08:26 2B69691A c (client) encrypted cccam-client 192.168.1.70 rejected (invalid access)
    2016/11/22 18:08:26 2B69691A c (cccam) account 'meter' not found!
    2016/11/22 18:08:26 2B69691A c (client) anonymous disconnected from 192.168.1.70
    2016/11/22 18:08:38 7DEF8087 c (client) encrypted cccam-client 192.168.1.70 rejected (invalid access)
    2016/11/22 18:08:38 7DEF8087 c (cccam) account 'meter' not found!
    2016/11/22 18:08:38 7DEF8087 c (client) anonymous disconnected from 192.168.1.70
    2016/11/22 18:08:49 0C25AAE1 c (client) encrypted cccam-client 192.168.1.70 rejected (invalid access)
    2016/11/22 18:08:49 0C25AAE1 c (cccam) account 'meter' not found!
    2016/11/22 18:08:49 0C25AAE1 c (client) anonymous disconnected from 192.168.1.70
    2016/11/22 18:09:01 3BC612DC c (client) encrypted cccam-client 192.168.1.70 rejected (invalid access)
    2016/11/22 18:09:01 3BC612DC c (cccam) account 'meter' not found!
    2016/11/22 18:09:01 3BC612DC c (client) anonymous disconnected from 192.168.1.70
    2016/11/22 18:09:02 6FD1033B c (dvbapi) Demuxer 0 stop descrambling program number 27EC (FFFE@FFFFFE:27EC unknown)
    2016/11/22 18:09:03 6FD1033B c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0963 ECM_PID: 051B PROVID: 000000
    2016/11/22 18:09:03 6FD1033B c (dvbapi) Demuxer 0 ecmpid 1 CAID: 0961 ECM_PID: 051B PROVID: 000000
    2016/11/22 18:09:03 6FD1033B c (dvbapi) Demuxer 0 ecmpid 2 CAID: 0960 ECM_PID: 051B PROVID: 000000
    2016/11/22 18:09:03 6FD1033B c (dvbapi) Demuxer 0 found 3 ECMpids and 8 STREAMpids in caPMT
    2016/11/22 18:09:03 6FD1033B c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0963 PROVID 000000 ECMPID 051B ANY CHID PMTPID 0117 VPID 0209
    2016/11/22 18:09:03 6FD1033B c (ecm) anonymous (0963@000000/FFFF/1135/71:7260A566B1BF262810A00333A851E420:0F06000000:): found (108 ms) by Reader-0
    2016/11/22 18:09:03 6FD1033B c (dvbapi) Demuxer 0 found 3 ECMpids and 8 STREAMpids in PMT
    2016/11/22 18:09:09 6FD1033B c (ecm) anonymous (0963@000000/FFFF/1135/71:AFA01E31C68D947923C5CB28884BFB9B:0F06000000:): found (99 ms) by Reader-0
    2016/11/22 18:09:12 5EBBA665 c (client) encrypted cccam-client 192.168.1.70 rejected (invalid access)
    2016/11/22 18:09:12 5EBBA665 c (cccam) account 'meter' not found!
    2016/11/22 18:09:12 5EBBA665 c (client) anonymous disconnected from
    oscam conf


    [global]
    nice = -1
    logfile = /var/log/oscam.log
    clienttimeout = 5000
    fallbacktimeout = 2500
    clientmaxidle = 120
    cachedelay = 120
    bindwait = 120
    resolvedelay = 30
    serialreadertimeout = 1500
    maxlogsize = 10
    waitforcards = 1
    preferlocalcards = 1
    saveinithistory = 1
    keepalive = 1


    [webif]
    httpport = 10000
    httpuser = root
    httppwd = xxxxxxx
    httprefresh = 15
    httpallowed = 192.168.0.0 - 255.255.255.255
    debug = 255



    [dvbapi]
    enabled = 1
    au = 1
    user = local
    boxtype = dreambox
    request_mode = 0
    reopenonzap = 1
    decodeforever = 1


    [cccam]
    port = 12000
    version = 2.1.3
    build = 3165
    reshare = 1


    oscam server


    [reader]
    label = SKYUK
    protocol = internal
    device = /dev/sci0
    cardmhz = 2700
    mhz = 450
    blockemm-g = 1
    blockemm-unknown = 1
    saveemm-u = 1
    saveemm-s = 1
    emmcache = 1,3,2
    group = 1
    caid = 0963


    oscam user


    [account]
    user = root
    pwd = xxxxxxx
    group = 1
    au = SKYUK
    caid = 0963


    [account]
    description = dvbapi
    user = local
    group = 1



    [account]
    user = internal
    pwd = share
    group = 1
    caid = 0963
    au = skyuk


    [account]
    user = userbob
    pwd = brother
    group = 1
    caid = 0963

    Quote

    2016/11/22 18:08:26 2B69691A c (client) encrypted cccam-client 192.168.1.70 rejected (invalid access)
    2016/11/22 18:08:26 2B69691A c (cccam) account 'meter' not found!


    You need to remove the c-line/reader from the upstairs box also to stop "meter" from trying to connect to your server.


    If you want "meter" to connect, try this:


    Paste this into your oscam.user file on your dm800se


    Quote

    [account]
    user = meter
    pwd = upstairs
    group = 1


    Then, add this line to your upstairs receiver.

    Quote

    C: 192.168.1.67 12000 meter upstairs

    thanks Codar i will give that a try and post back.


    - - - Updated - - -



    just tried this Codar and still getting (2016/11/22 18:08:26 2B69691A c (client) encrypted cccam-client 192.168.1.70 rejected (invalid access)
    2016/11/22 18:08:26 2B69691A c (cccam) account 'meter' not found! ) if its any help 192.168.1.70 is the ip of the box upstairs which is trying to connect but the box downstairs is rejecting it.do you think i should try a different image thanks


    - - - Updated - - -


    yippeee i was transfering oscam.user file using dcc then puting in the details for meter upstairs and transfering it back over which didnt work. i just tried adding user in webinf with the same details and now its working.thanks codar how would i add another user eg (brother@dyndns 12000 user pass) thanks again

    Quote

    how would i add another user eg (brother@dyndns 12000 user pass)


    Just add it like "meter"

    Quote

    [account]
    user = brother
    pwd = Password
    group = 1


    If your brother is outside your network, then use your dns instead of server local ip, eg:
    C: me.dyn.dns 12000 brother Password


    You will need port 12000 opened on your router and mapped to your server though, in order for it to work.
    Also, make sure your dns is updated.

    Quote from codar

    Just add it like "meter"


    If your brother is outside your network, then use your dns instead of server local ip, eg:
    C: me.dyn.dns 12000 brother Password


    You will need port 12000 opened on your router and mapped to your server though, in order for it to work.
    Also, make sure your dns is updated.


    thanks again Codar i will give that agoandpost back.


    thanks Codar everything working now port 12000 was opened to a certain ip address and the dm800 was on another a simple case of changing the ip on the dm800 to the right one.thanks for all the help.

    Quote from codar

    Just add it like "meter"


    If your brother is outside your network, then use your dns instead of server local ip, eg:
    C: me.dyn.dns 12000 brother Password


    You will need port 12000 opened on your router and mapped to your server though, in order for it to work.
    Also, make sure your dns is updated.


    Hi Codar


    I am also having the same problem.
    Is the box key entered as a hexadecimal or as the serial number from the box.
    Thanks
    Pedigree

CCcam Support Forum

Configs, discussion, downloads and guides for CCcam Softcam.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login