AFN Autoupdate Solo 4k

There are 2 replies in this Thread which was already clicked 1,297 times. The last Post () by Til.

  • Please i need help. I cant seem to get AFN Autoupdate to work. I am using ncam 1.1 and solo 4k. I have read this thread carefully .. and only get this:



    2016/12/05 19:37:56 00000000 s **** NCAm << cardserver log switched, version 1.1, build 01-07-2016 (arm-unknown-linux-gnueabi)
    2016/12/05 19:37:56 00000000 s debug_level=64
    2016/12/05 19:37:56 00000000 s (main) System name = Linux
    2016/12/05 19:37:56 00000000 s (main) Host name = vusolo4k
    2016/12/05 19:37:56 00000000 s (main) Release = 3.14.28-1.8
    2016/12/05 19:37:56 00000000 s (main) Version = #1 SMP Mon Aug 29 02:04:08 CEST 2016
    2016/12/05 19:37:56 00000000 s (main) Machine = armv7l
    2016/12/05 19:37:56 00000000 s (main) Stb model = dm8000
    2016/12/05 19:37:56 00000000 s (main) Stb vumodel = vusolo4k
    2016/12/05 19:37:56 00000000 s (main) Stb boxtype = vusolo4k
    2016/12/05 19:37:56 00000000 s (main) creating pidfile /tmp/.ncam/ncam.pid with pid 7177
    2016/12/05 19:37:56 00000000 s [Emu] ncam-emu version 733
    2016/12/05 19:37:56 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
    2016/12/05 19:37:56 00000000 s (main) signal handling initialized
    2016/12/05 19:37:56 00000000 s (config) 13 provid's loaded
    2016/12/05 19:37:56 00000000 s (config) 80 service-id's loaded in 0 ms
    2016/12/05 19:37:56 00000000 s (reader) emulator [emu] creating thread for device /usr/keys/SoftCam.Key
    2016/12/05 19:37:56 00000000 s (main) waiting for local card init
    2016/12/05 19:37:56 00000000 [Emu] info: FFDecsa parallel mode = 32
    2016/12/05 19:37:56 305C8677 r [Emu] reading key file: /usr/keys/SoftCam.Key
    2016/12/05 19:37:56 0F4013D8 h (webif) webif: decompressed 163512 bytes back into 406328 bytes
    2016/12/05 19:37:56 0F4013D8 h (webif) HTTP Server running. ip=0.0.0.0 port=8181
    2016/12/05 19:37:56 305C8677 r (reader) emulator [emu] Reader initialized (device=/usr/keys/SoftCam.Key, detect=cd, mhz=357, cardmhz=357)
    2016/12/05 19:37:57 305C8677 r (reader) emulator [emu] card detected
    2016/12/05 19:37:58 305C8677 r (reader) emulator [emu] found card system emu
    2016/12/05 19:37:58 305C8677 r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
    2016/12/05 19:37:58 305C8677 r [Emu] reading key file: /usr/keys/SoftCam.Key
    2016/12/05 19:37:59 00000000 s (main) init for all local cards done
    2016/12/05 19:37:59 00000000 s (emmcache) loading emmcache disabled since no reader is using it!
    2016/12/05 19:37:59 00000000 s (emmcache) loading emmstats disabled since no reader is using it!
    2016/12/05 19:37:59 00000000 s (anticasc) anti cascading disabled
    2016/12/05 19:37:59 1EC72E35 c (client) plain dvbapi-client granted (linuxsatsupport, au=auto (1 reader))
    2016/12/05 19:37:59 1EC72E35 c (dvbapi) dvbapi channelcache loaded from /usr/keys/ncam.ccache
    2016/12/05 19:37:59 1EC72E35 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 0 maximum amount of possible filters is 64 (ncam limit is 64)
    2016/12/05 19:37:59 00000000 [Emu] stream client 0 connected
    2016/12/05 19:37:59 00000000 [Emu] stream client 0 request /1:0:1:2:1:9:5A0000:0:0:0:
    2016/12/05 19:38:00 1EC72E35 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0E00 ECM_PID: 1772 PROVID: 000000
    2016/12/05 19:38:00 1EC72E35 c (dvbapi) Demuxer 0 found 1 ECMpids and 10 STREAMpids in caPMT
    2016/12/05 19:38:00 1EC72E35 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1772 ANY CHID PMTPID 138A VPID 04EC
    2016/12/05 19:38:00 1EC72E35 c (dvbapi) Demuxer 0 found 1 ECMpids and 10 STREAMpids in PMT
    2016/12/05 19:38:00 1EC72E35 c (ecm) linuxsatsupport (0E00@000000/0000/0002/40:5C71BE1740753107F6A763A46E02EBB0): rejected group (0 ms) - Atlantic (no matching reader)
    2016/12/05 19:38:00 1EC72E35 c (ecm) linuxsatsupport (0E00@000000/0000/0002/40:46743FA95F62E087F0B4E99A89CED66D): rejected group (0 ms) - Atlantic (no matching reader)
    2016/12/05 19:38:00 1EC72E35 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 0 disabled ecmpids!
    2016/12/05 19:38:00 1EC72E35 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1772 ANY CHID PMTPID 138A VPID 04EC
    2016/12/05 19:38:01 00000000 [Emu] Key not found: P 0002 01
    2016/12/05 19:38:01 1EC72E35 c (-) -- Skipped 2 duplicated log lines --
    2016/12/05 19:38:01 1EC72E35 c (ecm) linuxsatsupport (0E00@000000/0000/0002/40:9FBB986C55E1B289F8923EAC02978C59): rejected group (0 ms) - Atlantic (no matching reader)
    2016/12/05 19:38:02 1EC72E35 c (ecm) linuxsatsupport (0E00@000000/0000/0002/40:4BA5101E68A4E6ED3EA726D3810A9F0C): rejected group (1 ms) - Atlantic (no matching reader)
    2016/12/05 19:38:02 1EC72E35 c (dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 1 enabled and 0 disabled ecmpids!
    2016/12/05 19:38:02 1EC72E35 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1772 ANY CHID PMTPID 138A VPID 04EC
    2016/12/05 19:38:02 00000000 [Emu] Key not found: P 0002 01


    This is my configuration:


    ncam.server


    [reader]
    label = emulator
    protocol = emu
    device = emulator
    detect = cd
    group = 4
    emmcache = 2,2,2,0
    saveemm-unknown = 1
    saveemm-u = 1
    saveemm-s = 1
    saveemm-g = 1


    ncam.user


    [account]
    user = linuxsatsupport
    au = 1
    group = 1,2,3,4
    cccreshare = -1


    ncam.conf


    [global]
    logfile = /dev/null
    initial_debuglevel = 64
    nice = -1
    emmlogdir = /usr/keys
    lb_mode = 1
    lb_save = 100


    [cache]


    [streamrelay]
    stream_emm_enabled = 1


    [dvbapi]
    enabled = 1
    au = 1
    pmt_mode = 0
    delayer = 60
    user = linuxsatsupport
    read_sdt = 2
    write_sdt_prov = 1
    extended_cw_api = 2


    [webif]
    httpport = 8181
    httprefresh = 15
    httpshowmeminfo = 1
    httpshowuserinfo = 1
    httpshowreaderinfo = 1
    httpshowcacheexinfo = 1
    httpshowecminfo = 1
    httpshowloadinfo = 1
    httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255

  • I worked on that config some time now. From my perspective its fine. I dont want to us working key because i am trying to get it via autoupdate, as i cant put in a new key every few hours

NCam Support Forum

Configs, discussion, downloads and guides for NCam Softcam.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!